The central theoretical statement of this study stated that fathers have an active and effective role as mentors in transmitting values to the family and should be equipped for taking up this role, which may be applied in a pastoral-theological model. The idea of values for the father with regard to his role as mentor is defined and investigated in this study. The article format has been used in this thesis so that it consists of five articles which form a unity. In article one Scriptural pointers for the leaders and fathers being mentors to their followers (mentees) in the Old Testament are discussed. From the information summarized from the article, it is deduced that the leaders and fathers from the Old Testament served as mentors to their followers (mentees) with regard to values. Any leader or mentor can apply the principles and guidelines from the Old Testament to fathering, mentoring and transmitting values to a situation in everyday life. Article two deals with scriptural pointers for the leaders and father-figures as mentors to their followers (mentees) in the New Testament. From the information summarized from the article, it is deduced that the leaders and father figures from the New Testament served as mentors to their followers (mentees) with regard to values. Discipleship indicated the importance and significance of followers (mentees). Any leader or mentor can apply the guidelines and principles from the New Testament about leading, fathering, mentoring, discipling with regard to values even today. In article three the literature study on the fields of psychology, social work, psychiatric nursing and education were investigated in terms of family, fathering, mentoring and values. With regard to values those values according to Joubert (1986) and Heenan (2004) were used and integrated with values for the role of the father as mentor in the family context. The complexity of families and family structures in the real world were identified and discussed. The recommendations from this article are used to direct the empirical research on the role of the father as mentor with regard to values. The broader aim is to show how society may be impacted positively. Article four (chapter 5) deals with the empirical research that found that mentoring is needed and fathers should be mentors to their families. They should also be equipped with Christian values (the co-researchers consistently referred to Christian values which will serve as recommendation for further studies) in order to show that they can effect positive change to influence society. In article five (chapter 6) contours of a pastoral-theological model for the father as mentor in the transmission of Christian values are formulated. This model could possibly be applied to other spheres of life such as institutions (schools, colleges and universities), churches, societies and businesses to raise the effectiveness of these organizations through the mentoring of values. Topics for further research: * Equipping the mother as mentor in the transmission of Christian values. * Equipping children with Christian values so that they may be mentors to their peers. * Equipping children with Christian values so that they can be resistant to bad and inappropriate behaviour. * Equipping the family with Christian values so that they can be a mentor unit to other families in society. / Thesis (Ph.D. (Pastoral))--North-West University, Potchefstroom Campus, 2012.

The central theoretical statement of this study stated that fathers have an active and effective role as mentors in transmitting values to the family and should be equipped for taking up this role, which may be applied in a pastoral-theological model. The idea of values for the father with regard to his role as mentor is defined and investigated in this study. The article format has been used in this thesis so that it consists of five articles which form a unity. In article one Scriptural pointers for the leaders and fathers being mentors to their followers (mentees) in the Old Testament are discussed. From the information summarized from the article, it is deduced that the leaders and fathers from the Old Testament served as mentors to their followers (mentees) with regard to values. Any leader or mentor can apply the principles and guidelines from the Old Testament to fathering, mentoring and transmitting values to a situation in everyday life. Article two deals with scriptural pointers for the leaders and father-figures as mentors to their followers (mentees) in the New Testament. From the information summarized from the article, it is deduced that the leaders and father figures from the New Testament served as mentors to their followers (mentees) with regard to values. Discipleship indicated the importance and significance of followers (mentees). Any leader or mentor can apply the guidelines and principles from the New Testament about leading, fathering, mentoring, discipling with regard to values even today. In article three the literature study on the fields of psychology, social work, psychiatric nursing and education were investigated in terms of family, fathering, mentoring and values. With regard to values those values according to Joubert (1986) and Heenan (2004) were used and integrated with values for the role of the father as mentor in the family context. The complexity of families and family structures in the real world were identified and discussed. The recommendations from this article are used to direct the empirical research on the role of the father as mentor with regard to values. The broader aim is to show how society may be impacted positively. Article four (chapter 5) deals with the empirical research that found that mentoring is needed and fathers should be mentors to their families. They should also be equipped with Christian values (the co-researchers consistently referred to Christian values which will serve as recommendation for further studies) in order to show that they can effect positive change to influence society. In article five (chapter 6) contours of a pastoral-theological model for the father as mentor in the transmission of Christian values are formulated. This model could possibly be applied to other spheres of life such as institutions (schools, colleges and universities), churches, societies and businesses to raise the effectiveness of these organizations through the mentoring of values. Topics for further research: * Equipping the mother as mentor in the transmission of Christian values. * Equipping children with Christian values so that they may be mentors to their peers. * Equipping children with Christian values so that they can be resistant to bad and inappropriate behaviour. * Equipping the family with Christian values so that they can be a mentor unit to other families in society. / Thesis (Ph.D. (Pastoral))--North-West University, Potchefstroom Campus, 2012.

Tuberculosis is a disease that has a detrimental effect on the economic growth of South Africa. The country’s TB mortality rate is amongst the highest in the world, and the worst affected industry is mining. Effective environmental controls of tuberculosis in mining areas remain a challenge, mainly because there is a lack of quantitative data to guide the implementation of these controls. No occupational exposure limits exist for bio–aerosols, particularly Mycobacterium tuberculosis. This makes it difficult to distinguish between high– and low risk areas. It is believed that a single inhaled M. tuberculosis particle can cause the tuberculosis disease, and as this disease can deteriorate all major systems of the body, great care should be taken in the classification of an area. Aim: This study aimed to quantify the environmental presence of the M. tuberculosis bacilli in various occupational settings of a platinum mine. Method: The monitored areas are all structures above ground, and include high TB risk areas, such as the hospital TB Ward, and low TB risk areas, such as an office area. Personal monitoring of the staff in high TB risk areas has also been conducted. Monitoring was done via the PTFE filter sampling method and the SKC Bio–Sampler impinger method. The results of these two methods were compared to determine which method is more effective. The environmental variables, such as carbon dioxide and -monoxide levels, temperature (both ambient and wet– bulb), and relative humidity, were also monitored in order to identify any possible correlations between these variables and the levels of ambient TB particles. The effectiveness of the Ultraviolet Germicidal Irradiation (UVGI) system, which is in place in some of the monitored areas, was also indirectly assessed, i.e. to see if there are any M. tuberculosis particles present in an area that makes use of an UVGI system. The PCR analytical method was used to quantify the number of M. tuberculosis bacilli sampled, and the results were statistically analysed. Results: M. tuberculosis was found to be present in the office area, the laundry room, the hospital’s waiting area, the training facility, the dining room, and the mobile clinic. No M. tuberculosis particles were found in the hospital’s TB Ward and the change houses of the mine. The results showed that the PTFE filter method had a greater efficiency than the SKC Bio– Sampler in monitoring environmental M. tuberculosis particles, as the PTFE filter method yielded positive samples where the SKC Bio–Sampler did not. There is a practical significant difference between the two methods. No viable correlations between the environmental variables and M. tuberculosis prevalence were established due to the low number of samples taken. Conclusion: It seems that the effectiveness of a UVGI system is dependent on the number of people crowded into that specific area and the ventilation thereof. A UVGI system is only a precautionary measure and not a solution. There are too many factors that still need better understanding before the risk of contracting environmental TB in high risk areas of a mine can be determined. The high risk areas seem to be occupational settings that have poor ventilation, but accommodate a large number of people. The highest risk of TB infection remains close contact with infected individuals, as the results of the employee monitoring testified. / Thesis (M.Sc. (Occupational Hygiene))--North-West University, Potchefstroom Campus, 2011.

Through the years different models have been proposed to calculate the total effective thermal conductivity in packed beds. The purpose amongst others of these models is to calculate the temperature distribution and heat flux in high temperature pebble bed reactors. Recently a new model has been developed at the North–West University in South Africa and is called the Multi–Sphere Unit Cell (MSUC) model. The unique contribution of this model is that it manages to also predict the effective thermal conductivity in the near wall region by taking into account the local variation in the porosity. Within the MSUC model the thermal radiation has been separated into two components. The first component is the thermal radiation exchange between spheres in contact with one another, which for the purpose of this study is called the short range radiation. The second, which is defined as the longrange radiation, is the thermal radiation between spheres further than one sphere diameter apart and therefore not in contact with each other. Currently a few shortcomings exist in the modelling of the long–range radiation heat transfer in the MSUC model. It was the purpose of this study to address these shortcomings. Recently, work has been done by Pitso (2011) where Computational Fluid Dynamics (CFD) was used to characterise the long–range radiation in a packed bed. From this work the Spherical Unit Nodalisation (SUN) model has been developed. This study introduces a method where the SUN model has been modified in order to model the long–range radiation heat transfer in an annular reactor packed with uniform spheres. The proposed solution has been named the Cylindrical Spherical Unit Nodalisation (CSUN, pronounced see–sun) model. For validation of the CSUN model, a computer program was written to simulate the bulk region of the High Temperature Test Unit (HTTU). The simulated results were compared with the measured temperatures and the associated heat flux of the HTTU experiments. The simulated results from the CSUN model correlated well with these experimental values. Other thermal radiation models were also used for comparison. When compared with the other radiation models, the CSUN model was shown to predict results with comparable accuracy. Further research is however required by comparing the new model to experimental values at high temperatures. Once the model has been validated at high temperatures, it can be expanded to near wall regions where the packing is different from that in the bulk region. / Thesis (M.Ing. (Nuclear Engineering))--North-West University, Potchefstroom Campus, 2012.

Tuberculosis is a disease that has a detrimental effect on the economic growth of South Africa. The country’s TB mortality rate is amongst the highest in the world, and the worst affected industry is mining. Effective environmental controls of tuberculosis in mining areas remain a challenge, mainly because there is a lack of quantitative data to guide the implementation of these controls. No occupational exposure limits exist for bio–aerosols, particularly Mycobacterium tuberculosis. This makes it difficult to distinguish between high– and low risk areas. It is believed that a single inhaled M. tuberculosis particle can cause the tuberculosis disease, and as this disease can deteriorate all major systems of the body, great care should be taken in the classification of an area. Aim: This study aimed to quantify the environmental presence of the M. tuberculosis bacilli in various occupational settings of a platinum mine. Method: The monitored areas are all structures above ground, and include high TB risk areas, such as the hospital TB Ward, and low TB risk areas, such as an office area. Personal monitoring of the staff in high TB risk areas has also been conducted. Monitoring was done via the PTFE filter sampling method and the SKC Bio–Sampler impinger method. The results of these two methods were compared to determine which method is more effective. The environmental variables, such as carbon dioxide and -monoxide levels, temperature (both ambient and wet– bulb), and relative humidity, were also monitored in order to identify any possible correlations between these variables and the levels of ambient TB particles. The effectiveness of the Ultraviolet Germicidal Irradiation (UVGI) system, which is in place in some of the monitored areas, was also indirectly assessed, i.e. to see if there are any M. tuberculosis particles present in an area that makes use of an UVGI system. The PCR analytical method was used to quantify the number of M. tuberculosis bacilli sampled, and the results were statistically analysed. Results: M. tuberculosis was found to be present in the office area, the laundry room, the hospital’s waiting area, the training facility, the dining room, and the mobile clinic. No M. tuberculosis particles were found in the hospital’s TB Ward and the change houses of the mine. The results showed that the PTFE filter method had a greater efficiency than the SKC Bio– Sampler in monitoring environmental M. tuberculosis particles, as the PTFE filter method yielded positive samples where the SKC Bio–Sampler did not. There is a practical significant difference between the two methods. No viable correlations between the environmental variables and M. tuberculosis prevalence were established due to the low number of samples taken. Conclusion: It seems that the effectiveness of a UVGI system is dependent on the number of people crowded into that specific area and the ventilation thereof. A UVGI system is only a precautionary measure and not a solution. There are too many factors that still need better understanding before the risk of contracting environmental TB in high risk areas of a mine can be determined. The high risk areas seem to be occupational settings that have poor ventilation, but accommodate a large number of people. The highest risk of TB infection remains close contact with infected individuals, as the results of the employee monitoring testified. / Thesis (M.Sc. (Occupational Hygiene))--North-West University, Potchefstroom Campus, 2011.

Through the years different models have been proposed to calculate the total effective thermal conductivity in packed beds. The purpose amongst others of these models is to calculate the temperature distribution and heat flux in high temperature pebble bed reactors. Recently a new model has been developed at the North–West University in South Africa and is called the Multi–Sphere Unit Cell (MSUC) model. The unique contribution of this model is that it manages to also predict the effective thermal conductivity in the near wall region by taking into account the local variation in the porosity. Within the MSUC model the thermal radiation has been separated into two components. The first component is the thermal radiation exchange between spheres in contact with one another, which for the purpose of this study is called the short range radiation. The second, which is defined as the longrange radiation, is the thermal radiation between spheres further than one sphere diameter apart and therefore not in contact with each other. Currently a few shortcomings exist in the modelling of the long–range radiation heat transfer in the MSUC model. It was the purpose of this study to address these shortcomings. Recently, work has been done by Pitso (2011) where Computational Fluid Dynamics (CFD) was used to characterise the long–range radiation in a packed bed. From this work the Spherical Unit Nodalisation (SUN) model has been developed. This study introduces a method where the SUN model has been modified in order to model the long–range radiation heat transfer in an annular reactor packed with uniform spheres. The proposed solution has been named the Cylindrical Spherical Unit Nodalisation (CSUN, pronounced see–sun) model. For validation of the CSUN model, a computer program was written to simulate the bulk region of the High Temperature Test Unit (HTTU). The simulated results were compared with the measured temperatures and the associated heat flux of the HTTU experiments. The simulated results from the CSUN model correlated well with these experimental values. Other thermal radiation models were also used for comparison. When compared with the other radiation models, the CSUN model was shown to predict results with comparable accuracy. Further research is however required by comparing the new model to experimental values at high temperatures. Once the model has been validated at high temperatures, it can be expanded to near wall regions where the packing is different from that in the bulk region. / Thesis (M.Ing. (Nuclear Engineering))--North-West University, Potchefstroom Campus, 2012.

Electricity prepayment systems have been successfully implemented by South Africa’s national electricity utility (Eskom) and local municipalities for more than 17 years. The prepayment vending sub-system is a critical component of prepayment systems. It provides convenient locations for customers to purchase electricity. It predominantly operates in an “offline” mode, however, electricity utilities are now opting for systems that operate in an “online” mode. “Online” mode of operation or online vending is when a prepayment token is requested from a centralised server that is remote from the client at the actual point of sale (POS). The token is only generated by the server and transferred to the POS client, once the transaction, the POS client and the payment mechanism has been authenticated and authorised. The connection between the POS client and the server is a standard computer network channel (like Internet, direct dial-up link, X.25, GPRS, etc) The lack of online vending system standardisation was a concern and significant risk for utilities, as they faced the problem of being locked into proprietary online vending systems. Thus the South African prepayment industry, lead by Eskom, initiated a project to develop an industry specification for online vending systems. The first critical project task was a current state analysis of the South African prepayment industry, technology and specifications. The prepayment industry is built around the Standard Transfer Specification (STS). STS has become the de-facto industry standard to securely transfer electricity credit from a Point of Sale (POS) to the prepaid meter. STS is supported by several “offline” vending system specifications. The current state analysis was followed by the requirements analysis phase. The requirements analysis confirmed the need for a standard interface protocol specification rather than a full systems specification. The interface specification focuses on the protocol between a vending client and vending server and does not specify the client and server application layer functionality and performance requirements. This approach encourages innovation and competitiveness amongst client and server suppliers while ensuring interoperability between these systems. The online vending protocol design was implemented using the web services framework and therefore appropriately named, XMLVend. The protocol development phase was an iterative process with two major releases, XMLVend 1.22 and XMLVend 2.1. XMLVend 2.1 is the current version of the protocol. XMLVend 2.1 addressed the shortcomings identified in XMLVend 1.22, updated the existing use cases and added several new use cases. It was also modelled as a unified modelling language (UML) interface or contract for prepayment vending services. Therefore, clients using the XMLVend interface are able to request services from any service provider (server) that implements the XMLVend interface. The UML modelled interface and use case message pairs were mapped to Web Service Definition Language (WSDL) and schema (XSD) definitions respectively. XMLVend 2.1 is a secure and open web service based protocol that facilitates prepayment vending functionality between a single logical vending server and ‘n’ number of clients. It has become a key enabler for utilities to implement standardised, secure, interoperable and flexible online vending systems. AFRIKAANS : Voorafbetaalde elektrisiteitstelsels is suksesvol deur Suid-Afrika se nasionale elektrisiteitsverskaffer (Eskom) en plaaslike munisipaliteite geïmplementeer vir meer as 17 jaar. Die Voorafbetaal verkoop-subsisteem is 'n esensiële komponent van voorafbetaal elektrisiteitstelsels. Dit laat gebruikers toe om elektrisiteit te koop by ‘n verskeidenheid van verkooppunte. In die verlede het hierdie stelsels meestal bestaan as alleenstaande verkooppunte maar elektrisiteitsverskaffers is besig om hulle stelsels te verander om in n aanlyn modus te werk. Aanlyn verkoop is wanneer 'n voorafbetaalkoepon versoek word vanaf ‘n sentrale bediener wat vêr verwydered is van die kliënt se verkooppunt. Die koepon word slegs gegenereer deur die bediener en gestuur aan die kliënt nadat die transaksie, die kliënt self, en die betaling meganisme, gemagtig is. Die koppeling tussen verkooppuntkliënt en die bediener is ‘n standaard kommunikasie kanaal, (byvoorbeeld; Internettoegang, direkte inbel skakel, X.25 en “GPRS”) Die gebrek aan 'n standaard vir aanlynverkoopstelsels was 'n bekommernis en beduidende risiko vir elektrisiteitsverskaffers, aangesien hulle ‘n probleem ondervind dat hulle ingeperk sal word tot ‘n eksklusiewe ontwerp vir so ‘n aanlynverkoopstelsel. Dus het die Suid Afrikaanse voorafbetaal industrie, gelei deur Eskom, 'n projek begin om 'n industriespesifikasie te ontwikkel vir aanlyn verkoopstelsels. Die eerste kritiese projek taak was 'n analise van die huidige stand van die Suid-Afrikaanse vooruitbetaling industrie, die tegnologie en spesifikasies. Die voorafbetaal sektor is gebou rondom die Standaard Oordrag Spesifikasie, bekend as “Standard Transfer Specification” (STS). STS word algemeen aanvaar as die industrie standaard vir die oordrag van elektrisiteit krediet vanaf 'n Verkooppunt na die voorafbetaalmeter. STS word ondersteun deur verskeie alleenstaande verkoopstelsel spesifikasies. Die analise vir die huidige status was opgevolg deur ‘n studie van die vereistes vir so ‘n stelsel. Die vereistes analise het die behoefte bevestig vir 'n standaard koppelvlak protokol spesifikasie, eerder as 'n nuwe spesifikasie vir ‘n volledige oorafbetaalstelsel. Dit bepaal alleenlik die protokol koppelvlak tussen 'n voorafbetaalkliënt en die bediener. Dit spesifiseer nie die program vlak funksionaliteit of prestasie vereistes, vir die kliënt en bediener nie. Hierdie benadering bevorder innovasie en mededingendheid onder kliënt- en bediener-verskaffers, terwyl dit nog steeds verseker dat die stelsels wedersyds aanpasbaar bly. Die aanlyn verkoopprotokol ontwerp is geïmplementeer met die webdienste raamwerk en staan bekend as XMLVend. Die protokol vir die ontwikkeling fase was 'n iteratiewe proses met die twee groot weergawes, XMLVend 1.22 en XMLVend 2.1. Die huidige weergawe van die protokol - XMLVend 2.1, adresseer die tekortkominge wat geïdentifiseer is met XMLVend 1.22, terwyl dit ook die bestaande gebruiksgevalle opdatteer en verskeie nuwe gebruiksgevalle byvoeg. Dit was ook geskoei as 'n verenigde modelleringtaal (UML) koppelvlak, of 'n kontrak, vir die voorafbetaal verkoopsdienste. Kliënte is daarom in staat om, met behulp van die XMLVend koppelvlak, dienste te versoek van enige diensverskaffer wat die XMLVend koppelvlak ondersteun. Die UML gemodelleerde koppelvlak- en gebruiksgevalle- boodskappare was gemodeleer in die Web Dienste Definisie Taal (WSDL) en skema (XSD) definisies onderskeidelik. XMLVend 2.1 is 'n sekure en oop webdienste-gebaseerde protokol wat dit moontlik maak om voorafbetaalfunksies te fasilliteer tussen 'n enkele logiese verkoopbediener en 'x' aantal kliënte. Dit het 'n sleutelrol aangeneem vir verskaffers om ‘n gestandaardiseerde, veilige, wedersyds-aanpasbare en buigsame aanlyn verkoopstelsels moontlik te maak. Copyright / Dissertation (MSc)--University of Pretoria, 2010. / Electrical, Electronic and Computer Engineering / unrestricted