This diploma thesis is focused on operational testing of selected railway lines with different structures of superstructure. For the measurement purposes suitable measuring sections in directional curves on the rail corridors were chosen and suitable measuring methodology was designed. Based on all the tests the dynamic and acoustic parameters of tested structures were determined. For the test evaluations suitable mathematic methods in both time and frequency zone was chosen. Part of my work is also to compare the parameters of the tested structures and to make recommendations for practise.

In terms of deciding on the appropriate use of the railway superstructure assemblies in both the recommendations arising from the theoretical analysis (modeling), as well as recommendations obtained under static and dynamic testing of the finished product play an important role. Such tests can then be applied in the laboratory or in the field. The thesis will be devoted to operational testing of selected track grid structures in situ. For measurement purposes an appropriate measuring point will be chosen and the methodology of measurement will be proposed. In terms of track geometry sections in curves will be selected. On the basis of tests carried out dynamic parameters of structures will be determined. To their evaluation suitable mathematical system will be chosen. It assumes the use of mathematical methods in time and frequency areas. In the thesis there will also be a comparison of the parameters of the tested structures. Based on the measurements it will be a source of recommendations for the practice.