The diploma thesis with experimental verification influence moisture of the dielectric properties of non-aged and thermally, electric and multistress aged slot insulation Isonom NMN. Above all both components of the complex permittivity are examined in dependence on frequency during the thermal, electric and multistress ageing. Practical part is specialized on design, realization and examination of workplace multistress ageing.

The subject of this thesis are composite materials, measuring of their dielectric qualities, particularly of the polyamide and the polyamide filled with various weight percentage of the ground mica. The essential intent of the thesis is to determine the measuring methodology and respective measurement of the basic dielectrical quantities of materials, as are loss factor and the complex permitivity components. The measuring should be done for various temperature and humidity combinations. The thesic contains the physical explanation of measured dependences.

This work deals with issues of dielectric composite materials. The general aim is to observe how the amout of nanofilling influence dielectric spectrum in dependence on relative humidity and temperature which is measured on prepared samples. For this purpose had been created variety of a samples of electroinsulating varnish with different percentage of filling with nanoparticles. Experimental material is epoxy resin NH91 LV filled by Al2O3 nanoparticles.

This project deals with calculation parts of complex permittivity varnish samples which is filled by nanoparticles of metal oxides. Opening of this project deals with theory of dielectric and effects in dielectric, theory of compounds and expressions in composite systems. Following topic is theory of nanoparticles and nanotechnologies and summarize adjusted results about this branch of knowledge. In practical part of work is include method which was use to make varnish samples filled by nanoparticles, prepare to measurement methods and whole results of measurement. In the end of work is analysis influence of filler particles each filler types to dielectric material and results verified mixture mathematical expressions.

Master´s thesis covers introduction to the problems of materials with specific proprieties named liquid crystals. Theoretic part features primary fission these materials, theirs mechanical, electrotechnical and optical characteristics. Interesting chapter is description choice application including perhaps most interesting using liquid crystals - liquid crystal display. In this trend continues experimental part too, where there are first mentioned characteristics LCD, and after it alone metering capacitive characteristics display with active matrix. Main attention in experiment is however concentraded on evaluation frequency analysis of components complex permittivity regarding in plant temperature on submitted sample liquid crystals.

The bachelor thesis submitted deals with properties of electro-insulating lacquer hardenable by ultraviolent radiation and temperature. Within the theoretical part a summary of electro-insulating lacquers used in electrotechnics has been elaborated. Chemical changes that take place in this material group have been described during hardening process. A method of dielectric relaxation spectroscopy specifically focused on mathematic and physical description of polarisation and conductive mechanisms taking place in the structure of the given material has been closely studied. In the experimental part a workplace for hardening and long-term exposition of lacquered samples during simultaneous effect of various climatic elements has been designed and built. The selected electric and mechanical properties have been monitored on three sets of experimental samples prepared by means of different methodical procedures. The results gained have been mathematically evaluated and physically interpreted in term of methodical procedure of hardening and different temperature of measurement.

Diploma thesis treat of effect of thermal, electrical and combined (thermal electrical) stress on electrical characteristics of insulation material ISONOM NMN which is used as a slot insulation in electric motors. To monitor the stress is used the method of dielectric relaxation spectroscopy. Under examinations are the resultant dielectric spectra which constitute the frequency dependencies of components of complex permitivity. Compared are the effects of particular stresses on dielectric spectra of surveyed insulative material.

This work deals with the studies of liquid oligobutadiens properties in AC electric field by dielectric relaxation spectroscopy method. The current issue in the diagnosis of oligomeric and polymeric materials during the activity of various degradation factors and options of their alleviation and suppression was studied. The existing apparatus is modified for monitoring possibilities of polymeric materials during the action of various degradation and operational factors. Effect of climatic factors are experimentally investigated, especially UV radiation and temperature on the course of the frequency dependence of complex permittivity components with respect to the different composition and length of the polymer chain.

The present work deals with the electrical properties of nanocomposite materials. Samples for the experiment are made of epoxy resin as a matrix and oxides TiO2, Al2O3, WO3, SiO2 as nanofillers in 0.5 and 1 percent performance. The experimental samples are measured in temperature and frequency dependence of relative permittivity, dissipation factor, rezistivity and are broken down by the influence of filler on the electrical properties of the polymer. Attention is also paid to the mechanical properties of nanocomposites.

This thesis studies the properties and the applications of prospective ferroelectric materials which are used in electrical engineering and electronic industry. Further are physically explained and mathematically described the basic principles running in their structure. The practical part is aimed to build a workplace for measuring the components of the complex permittivity in the frequency and temperature area, controlled by the programmed measurement and service application using the Agilent VEE Pro 8.0 and MS Excel. The functionality of the workplace was verified on the selected material samples by measurement and evaluation of selected properties. For this issue was created electronic text, which can be used as a guide for laboratory exercises and it is an integral part of this work.