Spelling suggestions: "subject:"plasmonic""
1 |
Light manipulation through periodic plasmonic corrugationsLee, Youngkyu 07 July 2014 (has links)
Collective oscillations of free electrons localized in a small volume have drawn a lot of attention for the past decades. These so-called plasmons have special optical properties that can be used in many applications ranging from optical modulators to sensing of small quantities of molecules. Large numbers of extensive plasmonic applications are being based on the capability of light manipulation proposed by the periodic nanostructure and its optical response. By controlling over the way in which plasmonic modes interact with incident radiation, periodic corrugation opens up the possibility of developing new and exciting photonic devices. The goal of doctoral research presented herein is to investigate at a fundamental level of several corrugated metallic structures which may offer effective control of the optical response by coupling radiation to plasmonic modes. By controlling morphologies and material compositions, sophisticatedly engineered nanostructure may allow the coupling of electromagnetic waves into desired spectral/spatial modes in a way that an effective tuning of macroscopic optical properties in desired domain can be achieved. This dissertation is dedicated to answer the following question, if and how one can manipulate the optical responses by use of different nanostructures and various materials. Based on devised analytical models proposed for various corrugated nanostructures, we show that I. spatial and II. spectral manipulation of light can be realized. Specifically, we investigate how the grating array interacts with light. To understand those periodic nanostructures showing inherently dispersive nature, firstly the diffraction of light and accompanying effects are studied with the analytical models and numerical simulation. On this basis, we show the optical response is readily tunable, and efficiently controlled by the morphology and dielectric property of the corrugations. The outline of doctoral research is broadly categorized into (1) theoretical considerations on the topic of plasmonics, (2) specific insight in the analytical model of the various nanostructures, and (3) investigation of the plasmonic properties of the fabricated structures. Lastly, the discussion of outlook to possibilities and future experiments will close the dissertation. / text
|
2 |
Electromagnetic Response Design With Plasmonic MetamaterialsWu, Xueyuan January 2018 (has links)
Thesis advisor: Krzysztof Kempa / Plasmons are quantized quasiparticles of the electron density waves. When coupled with photons, plasmons become another type of quasiparticles called plasmon polaritons. At the surface of a metal, surface plasmons can be formed. They have confined propagation on the surface, analogous to water waves in a pool. Plasmonic metamaterials manipulate the surface plasmon resonances, achieving a variety of unseen optical properties in nature. For the sake of fast emerging of nano fabrication and characterization techniques in recent years, plasmonic metamaterials have been applied in a wide range of fields, such as broadband absorption in solar cells, negative index materials for cloaking, subwavelength imaging, and wave modulations. One unique property of plasmonic metamaterial is offering remarkable flexibility in controlling effective dielectric properties of matter, depending on the composite design. In this thesis, several concepts of EM response manipulation using plasmonic metamaterials are proposed and studied. These studies include: (1) a scheme assuring topologically protected photonic edge states in the visible range utilizing epsilon-near-zero (ENZ) gyroelectric metamaterials; (2) engineering low frequency dielectric function with extremely subwavelength magnetic resonators; and (3) tailoring the electron-phonon interactions (including controlling superconductivity) by introducing plasmonic resonators into the phonon systems. These works may enable a broad range of applications in both photonic and phonon systems. / Thesis (PhD) — Boston College, 2018. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Physics.
|
3 |
Optical properties and collective modes of plasmonic meta-surfacesMousavi, Seyyed Hossein 31 January 2013 (has links)
Plasmonics is an important branch of optics and photonics, focusing on the electromagnetic response of metals or other materials with free carriers. This field has recently experienced a significant expansion due to its importance for applications. Plasmonics has shown great promises in green energies, biosensing, nanolasers, and imaging. The main advantage of plasmonics stems from the existence of unique excitations, referred to as plasmons, representing collective response of the free carriers to the electromagnetic field. While plasmons, both in the bulk and on the surface of the metals, have been known for decades, the recent advances in nano fabrication and material sciences at nano scale have enabled versatile engineering of these modes.
Focus of my dissertation is surface plasmons whose properties can be tailored by judiciously nano-patterning metal films and surfaces. Such patterned structures, referred to as metasurfaces, are the main tool to control and boost the light-matter interaction. Appropriately designed metasurfaces provide many-fold electromagnetic energy enhancement on the surface which can be used to amplify numerous surface effects such as SEIRA and nonlinear optical phenomena, facilitate spectroscopy, and enhance absorption of light.
In this thesis, I report approaches to shape and engineer the confinement, mode profile, and lifetime of the surface modes. I also investigate how the dielectric environment affects the properties of the modes. The effect of the geometry and topology of the nano patterns on the optical response of metasurfaces is also studied. Finally I study how manipulating symmetries of metasurfaces can be used to tailor polarization state of light and lifetime of the modes using an ultrathin metasurface, instead of bulky traditional optical elements. %The symmetry manipulation results in the plasmonic analogue of Electromagnetically Induced Transparency, a well-known phenomenon in atomic physics.
The work summarized in this thesis has brought marked advances in understanding the physics behind the collective surface waves in nano-structured metasurfaces. It paves new avenues for engineering structures with desirable properties. The immediate application of my findings is the compactification of optical elements, and envisioning next-generation plasmonic-based on-chip devices. / text
|
4 |
Spin-controlled second harmonic generations on plasmonic metasurfacesTang, Yutao 02 September 2020 (has links)
Plasmonic metasurfaces provide a novel platform for designing and implementing optical functional devices with distinguished advantages of their compactness and ultrathin footprint over traditional optical elements. The constituent metallic structures, or so-called "meta-atoms" or "meta-molecule" can interact with light at a subwavelength scale and introduce local modulations over multiple degrees of freedom like amplitude, phase, polarization, etc. The specific functions of the devices are then realized by assembling those meta-atoms together to form a planar interface with predesigned distributions. In this thesis we mainly studied nonlinear plasmonic metasurfaces made of gold meta-atoms for second harmonic generations (SHG). These metasurfaces work in the near infrared regime, and exhibit spin-controlled nonlinear responses due to the nonlinear geometric Pancharatnam-Berry phase-based designs. Firstly, a quasicrystal metasurface was demonstrated to modulate the far-field second harmonic radiations based on both the local symmetry of the meta-atoms and the global symmetry of the lattice those meta-atoms adhere to. Our designs of the nonlinear optical quasicrystal metasurfaces are based on the well-known Penrose tiling and the newly found bronze-mean hexagonal quasiperiodic tiling. The optical diffraction behaviors are studied in both linear and nonlinear regimes to reveal the effects of local and global symmetries on the far-field radiations. Secondly, a polarization manipulation metasurface was designed to encode a grayscale image into the polarization profiles of the generated second harmonic waves. We use single meta-atoms to manipulate the polarization directions of the second harmonic waves into predefined directions. With homogenous intensity profiles, the vectorial second harmonic beam can encode and decode information securely. At last, we utilized the state-of-the-art nano-kirigami technology to design and fabricate a three-dimensional plasmonic metasurface, which exhibits giant nonlinear circular dichroism in second harmonic generations. The second harmonic generations from the metasurface is much stronger when pumping by right circularly polarized fundamental waves than left circularly polarized ones. Broadband near-unity nonlinear circular dichroism was observed and numerical models were developed to explain the phenomenon. We believe that our works presented in this thesis enriched the study of plasmonic metasurfaces in the nonlinear optical regimes, and may be used to design novel nonlinear light sources, encryption applications, chiroptical devices, etc.
|
5 |
Spin-controlled second harmonic generations on plasmonic metasurfacesTang, Yutao 02 September 2020 (has links)
Plasmonic metasurfaces provide a novel platform for designing and implementing optical functional devices with distinguished advantages of their compactness and ultrathin footprint over traditional optical elements. The constituent metallic structures, or so-called "meta-atoms" or "meta-molecule" can interact with light at a subwavelength scale and introduce local modulations over multiple degrees of freedom like amplitude, phase, polarization, etc. The specific functions of the devices are then realized by assembling those meta-atoms together to form a planar interface with predesigned distributions. In this thesis we mainly studied nonlinear plasmonic metasurfaces made of gold meta-atoms for second harmonic generations (SHG). These metasurfaces work in the near infrared regime, and exhibit spin-controlled nonlinear responses due to the nonlinear geometric Pancharatnam-Berry phase-based designs. Firstly, a quasicrystal metasurface was demonstrated to modulate the far-field second harmonic radiations based on both the local symmetry of the meta-atoms and the global symmetry of the lattice those meta-atoms adhere to. Our designs of the nonlinear optical quasicrystal metasurfaces are based on the well-known Penrose tiling and the newly found bronze-mean hexagonal quasiperiodic tiling. The optical diffraction behaviors are studied in both linear and nonlinear regimes to reveal the effects of local and global symmetries on the far-field radiations. Secondly, a polarization manipulation metasurface was designed to encode a grayscale image into the polarization profiles of the generated second harmonic waves. We use single meta-atoms to manipulate the polarization directions of the second harmonic waves into predefined directions. With homogenous intensity profiles, the vectorial second harmonic beam can encode and decode information securely. At last, we utilized the state-of-the-art nano-kirigami technology to design and fabricate a three-dimensional plasmonic metasurface, which exhibits giant nonlinear circular dichroism in second harmonic generations. The second harmonic generations from the metasurface is much stronger when pumping by right circularly polarized fundamental waves than left circularly polarized ones. Broadband near-unity nonlinear circular dichroism was observed and numerical models were developed to explain the phenomenon. We believe that our works presented in this thesis enriched the study of plasmonic metasurfaces in the nonlinear optical regimes, and may be used to design novel nonlinear light sources, encryption applications, chiroptical devices, etc.
|
6 |
Plasmonic-enhanced THz generation and detection using photoconductive antennasJooshesh, Afshin 26 September 2016 (has links)
Terahertz technology is rapidly growing for applications in various fields such as medical sciences, remote sensing, material characterization, and security. This accelerated growth has motivated engineers to develop compact, portable, and cost-effective terahertz sources and detectors. Terahertz generation and detection can be achieved using photoconductive antennas (PCAs), which have unique advantages. Notably, they do not require a vacuum or cryogenic cooling to function. PCAs operate on the principle of photoconductivity, which allows for compact integration with a fiber optic laser. It is also possible to launch THz radiation to a waveguide, which can be used for making a robust THz spectroscopy system.
Ultra-short laser pulses are available in both 800 nm and 1550 nm wavelengths. However, the 1550 nm window has distinctive advantages such as availability of fiber amplifiers and fiber based electro-optical components at a relatively lower cost. The goal of this research is to introduce cost-effective and state-of-the-art solutions to develop THz transceivers for use in terahertz time-domain spectroscopy (THz-TDS) at 1550 nm wavelength.
In this thesis we explore three approaches for enhancing THz emission and reception using PCAs. First, an array of hexagonal shape plasmonic nano-structures was used to increase the optical field coupling to the minimum depth of the substrate. Next, nano-structures also helped with enhancing the local electric field inside a low-cost semi-insulating GaAs substrate. This technique resulted in a 60% enhancement of the THz emission compared to a commercial LT-GaAs based PCA with antireflection coating. Moreover, the plasmonic nano-structures efficiently remove heat from the gap area allowing for operation at higher bias voltages. Plasmonic structures on LT-GaAs were investigated, which use a mid-gap Arsenic defect state to absorb 1550 nm light. The plasmonic devices were found to outperform existing InGaAs substrate based THz devices by factor of two. Finally, optimization of the LT-GaAs growth and annealing conditions was investigated to maximize the THz signal at 1550 nm. Outcomes of this research pave the way for designing cost-effective THz transceivers for time domain Terahertz spectroscopy systems at 1550 nm wavelength. / Graduate
|
7 |
Metamaterials, Surface Waves, and Their ApplicationsChen, Wenchen January 2014 (has links)
Thesis advisor: Willie J. Padilla / The field of metamaterials (MMs) has garnered a great deal of attention ever since the experimental demonstration of negative refractive indexes. Such an exotic response stemmed from the engineering capability of MMs, as they can obtain almost any optical responses at any given frequency by carefully structuring the geometries. There are countless examples where MMs have posed promising results in tailoring free space radiation. However, their usage beyond this common platform is far less explored. For examples, surface electromagnetic waves, which offer great potentials for future device applications, could be an intriguing place for the further development of metamateirals. In this dissertation, we study various MM configurations where the interplay between surface waves and metamaterials has a significant impact on the device performance. Firstly, Chapter 1 introduces some fundamental concepts of metamaterials and surface electromagnetic waves, and outline the fabrication, experiments, and characterization details. In Chapter 2, we investigate whether the effective optical parameters of MMs have the exact physical meaning as those of natural substances. Two types of MM resonators are studied, and we found the thickness of the host matrix plays a crucial role in such a homogenization process. Next, we present a computational and experimental study of MMs in conjunction with a novel gigahertz/terahertz transmission line, in Chapter 3. By optimizing the coupling between the MMs and the signal, information can be encoded. Chapter 4 presents a study of designing an extremely subwavelength magnetic MM. By maximizing the effective inductance and capacitance of the structure, the final geometry obtains a strong magnetic resonance with the size of merely λₒ/2000, where λₒ is the resonant wavelength. A novel time-domain spectroscopic method is also proposed to determine the frequency-dependent permeability of the samples. In Chapter 5, we characterize two hidden channels of MM perfect absorbers : scattering and generation of surface electromagnetic waves. In particular, we unveil lossy surface waves are generated during the process resulting in an enhancement of angular absorbance. The study provides a new insight to the working principle of MMAs. In Chapter 6, we investigate complementary MM structures that exhibit strong extraordinary optical transmission with higher transmission efficiency. We discover the origin of the fundamental mode is irrelevant to the Bloch modes. Lastly, we summarize all achievements and give an outlook in Chapter 7. / Thesis (PhD) — Boston College, 2014. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Physics.
|
8 |
Mechanisms and applications of near-field and far-field enhancement using plasmonic nanoparticlesHarrison, Richard K., 1982- 14 February 2013 (has links)
The resonant interaction of light with metal nanoparticles can result in extraordinary optical effects in both the near and far fields. Plasmonics, the study of this interaction, has the potential to enhance performance in a wide range of applications, including sensing, photovoltaics, photocatalysis, biomedical imaging, diagnostics, and treatment. However, the mechanisms of plasmonic enhancement often remain poorly understood, limiting the design and effectiveness of plasmonics for advanced applications. This dissertation focuses on evaluating the mechanisms of plasmonic enhancement and distinguishing between near and far field effects using simulations and experimental results.
Thorough characterization of metal nanoparticle colloids shows that electromagnetic simulations can be used to accurately predict the optical response of nanoparticles only if the true shapes and size distributions are taken into account. By coupling these optical interaction calculations with heat transfer models, experimental limits for the maximum optical power before nanoparticle melting can be found. These limits are important for plasmonic multiphoton luminescence imaging applications. Subsequently, we demonstrate ultrafast laser plasmonic nanoablation of silicon substrates using gold nanorods to identify the near-field enhancement and mechanism of plasmon-assisted ablation. The experimentally observed shape of the ablation region and reduction of the ablation threshold are compared with simulations to show the importance of the enhanced electromagnetic fields in near-field nanoablation with plasmonic nanoparticles.
The targeted use of plasmonic nanoparticles requires narrow size distribution colloids, because wide size distributions result in a blurring and weakening of the optical response. A new synthesis method is presented for the seeded-growth of nearly monodisperse metal nanoparticles ranging from 10 to 100 nm in diameter, both with and without dielectric shells of controlled thickness. This method is used to acquire fine control over the position and width of the plasmonic peak response. We also demonstrate self-assembled sub-monolayers of these particles with controllable concentrations, which is ideal for looking at plasmonic effects in surface and layered geometries.
Finally, we present results for the spatial distribution of absorption around plasmonic nanoparticles. We introduce field-based definitions for distinguishing near-field and far-field regions and develop a new set of equations to determine the point-by-point enhanced absorption in a medium around a plasmonic nanoparticle. This set of equations is used to study plasmon-enhanced optical absorption for thin-film photovoltaic cells. Plasmonic nanoparticle systems are identified using simulations and proof-of-concept experiments are used to demonstrate the potential of this approach.
|
9 |
Nonlinear, passive and active inclusions to tailor the wave interaction in metamaterials and metasurfacesChen, Pai-Yen 21 February 2014 (has links)
Metamaterials have experienced a rapid growth of interest over the past few years and new capabilities are being explored to broaden the range of their unique electromagnetic properties for functional devices, including tunable, switchable, and nonlinear properties. In the future, there is the prospect of opening even more exciting applications with metamaterials, not yet imagined and thought not to be possible with currently available techniques. In my dissertation, I discuss several solutions for passive and active metamaterials and metasurfaces, with a particular focus on their potential applications, enabling a new class of metamaterials in the spectral range from radio frequencies (RF) and microwaves, terahertz (THz) to visible light. First, I demonstrate that by loading plasmonic nanoantennas with nonlinear nanoparticles, the nonlinear optical processes, such as multiple wave mixing, high harmonic generation, phase conjugation and optical bistability may be realized at the nanoscale, thanks to the strongly enhanced optical near fields accompanied with the plasmonic resonance. I present here the design, practical realization, and homogenization theory of nonlinear optical metamaterials and metasurfaces formed by optical nanoantenna arrays loaded with nonlinearities. As an extreme case of light manipulation at the "atomic" scale, I also study the collective oscillation of massless Dirac fermions inside grapheme monolayers, in which surface plasmon polaritons are controlled by electrostatic gating. I present how a graphene monolayer may serve as a building block and design paradigm for adaptable, switchable and frequency-configurable THz metamaterials and nanodevices, realizing various functionalities for cloaking, sensing, absorbing, switching, modulating, phasing, filtering, impedance transformation, photomixing and frequency synthesis in the THz spectrum. Last I present various metamaterial designs applied to invisibility cloaks based on the scattering cancellation mechanism enabled by plasmonic materials and passive/active metamaterials and metasurfaces. This cloaking technology may be used for camouflaging, enhancing the sensitivity and signal-to-noise ratio in RF wireless communication and sensor networks. In addition, electrically-small antennas based on the phase compensation effect offered by metamaterials with low or negative material properties are presented, with tailorable modal frequencies, bandwidth, and radiation properties. / text
|
10 |
Mechanisms and applications of near-field and far-field enhancement using plasmonic nanoparticlesHarrison, Richard K., 1982- 12 March 2014 (has links)
The resonant interaction of light with metal nanoparticles can result in extraordinary optical effects in both the near and far fields. Plasmonics, the study of this interaction, has the potential to enhance performance in a wide range of applications, including sensing, photovoltaics, photocatalysis, biomedical imaging, diagnostics, and treatment. However, the mechanisms of plasmonic enhancement often remain poorly understood, limiting the design and effectiveness of plasmonics for advanced applications. This dissertation focuses on evaluating the mechanisms of plasmonic enhancement and distinguishing between near and far field effects using simulations and experimental results.
Thorough characterization of metal nanoparticle colloids shows that electromagnetic simulations can be used to accurately predict the optical response of nanoparticles only if the true shapes and size distributions are taken into account. By coupling these optical interaction calculations with heat transfer models, experimental limits for the maximum optical power before nanoparticle melting can be found. These limits are important for plasmonic multiphoton luminescence imaging applications. Subsequently, we demonstrate ultrafast laser plasmonic nanoablation of silicon substrates using gold nanorods to identify the near-field enhancement and mechanism of plasmon-assisted ablation. The experimentally observed shape of the ablation region and reduction of the ablation threshold are compared with simulations to show the importance of the enhanced electromagnetic fields in near-field nanoablation with plasmonic nanoparticles.
The targeted use of plasmonic nanoparticles requires narrow size distribution colloids, because wide size distributions result in a blurring and weakening of the optical response. A new synthesis method is presented for the seeded-growth of nearly monodisperse metal nanoparticles ranging from 10 to 100 nm in diameter, both with and without dielectric shells of controlled thickness. This method is used to acquire fine control over the position and width of the plasmonic peak response. We also demonstrate self-assembled sub-monolayers of these particles with controllable concentrations, which is ideal for looking at plasmonic effects in surface and layered geometries.
Finally, we present results for the spatial distribution of absorption around plasmonic nanoparticles. We introduce field-based definitions for distinguishing near-field and far-field regions and develop a new set of equations to determine the point-by-point enhanced absorption in a medium around a plasmonic nanoparticle. This set of equations is used to study plasmon-enhanced optical absorption for thin-film photovoltaic cells. Plasmonic nanoparticle systems are identified using simulations and proof-of-concept experiments are used to demonstrate the potential of this approach. / text
|
Page generated in 0.0551 seconds