This thesis-project aims to research the possibilities of new wireless technologies in general control-situations. We have studied different existing control protocols, and developed a new protocol focusing on textbased menus. Our protocol is scaleable, easy to implement, and platform- and media independent. Since our protocol supports Plug and Play with dynamically allocated id’s, it does not require a unique id in the hardware. To test the protocol we have developed a prototype system, consisting of a mobile phone connected to a server, which in turn is connected to two slave units, controlling peripheral equipment on 220 Volt. The phone is an Ericsson T28, equipped with a Bluetooth unit. The server is runningthe real-time OS eCos on an ARM 7TDMI Evaluation Kit, and the slave units consist of two developer boards equipped with PIC-processors. Communication between the phone and the server is done over Bluetooth. However we did not find a working Bluetooth protocol stack ported to eCos, so a serial cable was used instead. Communication between the server and the slaves is done over a RS-485 serial network which simulates the traffic over a radio-network. The results show that our protocol is working, and that our system would be easy to implement, cheap to produce and very scalable.

Parmi la multitude des données pétrophysiques utilisées pour décrire une formationgéologique, certaines permettent spécifiquement d'en prédire la capacité de production,à savoir : la porosité, la perméabilité intrinsèque et le coefficient de Klinkenberg.Dans le cas particulier des gas shales, ces trois propriétés essentielles sont extrêmementdifficiles à mesurer précisément, compte tenu de la complexité de cesroches. Cette thèse s'inscrit dans la continuité de travaux menés au laboratoire I2M départementTREFLE, sur l'analyse et l'amélioration de la méthode Pulse Decay, quiconstitue la méthode de mesure transitoire classiquement utilisée dans l'industriepétrolière pour identifier une ou plusieurs des propriétés d'intérêt. Les multiplespoints faibles de la méthode Pulse Decay sont ici présentés, de même que les pointsforts de la nouvelle méthode issue du perfectionnement de la méthode Pulse Decay,à savoir la méthode Step Decay, développée au laboratoire I2M et brevetée en partenariatavec TOTAL. Plus précisément, les performances de la méthode Step Decaysont ici étudiée aussi bien numériquement qu'expérimentalement, en condition homogène,comme en condition hétérogène. Ce manuscrit fournit également les résultatsd'une analyse portant sur la méthode Pulse Decay sur broyat, qui forme une alternativepossible à la méthode Pulse Decay sur carotte mais dont la fiabilité est fortementremise en question. / Among the multitude of petrophysical data used to describe a geological formation,some of them allow specifically to predict the production capacity, namely: the porosity,the intrinsic permeability and the Klinkenberg coefficient. In the particular case ofgas shales, these three essential properties are extremely difficult to measure precisely,because of the complexicity of these rocks. This thesis is the continuity ofworks led in I2M laboratory-TREFLE department, on the analysis and the improvementof the Pulse Decay method, which is the classical transient method of measurementused in the oil&gas industry to identify one or several of the properties ofinterest. The numerous weaknesses of the Pulse Decay method are here presented,as the strengths of the new method derived from the improvement of the Pulse Decaymethod, namely the Step Decay method, developed in I2M laboratory and patentedin partnership with TOTAL. More exactly, the performances of the Step Decaymethod are here studied numerically as well as experimentally, in homogeneouscondition, as in heterogeneous condition. This manuscript provides also the results ofan analysis dealing with the Pulse Decay method on cuttings, which forms a possiblealternative to the Pulse Decay method on plug but which reliability is highly questioned.

Master‘s thesis covers use of graphical user interface in audio plug-ins. In first part structure and rendering techniques of audio plug-ins graphical libraries are described. Their efficiency and their way of memory utilization is questioned. Next part puts these techniques in comparison with the state of the art methods used in computer graphics and gaming industry. Their possible use in audio graphical interafaces is analyzed. In the following part, thesis finds solutions to uneffective methods in frequently used situations by presenting deferred shading into audio parameter editor with the goal of photorealistic rendering. Second introduced technique of „Knob Normal Maps“ reduces number of images needed for rendering of turning knob from hundereds to six with comparable results. Goal of diploma thesis was to create graphical library. Graphical library with name RealBox was created, and introduced techniques are the core features. Library reduces work needed to achieve graphical user interfaces for 2D and 3D cases of use. Full class and method documentation for RealBox library was assembled. Library was tested during creation of three VST plugins, with different approaches and emphasis on quick work and fine rendering. Graphical library offers new, faster way of creating audio plug-in interfaces.

Developers of software systems have to communicate about the project they are building. Especially when working in a distributed development team, such as open source projects, developers must use an asynchronous means of communication. Studies tell us that e-mails are, by far, the means of communication mostly used during the distributed development, opposed to instant messaging, commit comments, or code comments. Therefore, we can imagine archives containing development e-mails enclose essential information concerning various entities of the source code. Unfortunately, such information gets lost with time, since relevant e-mails are hard to retrieve. We have developed REmail, an Eclipse plug-in, to integrate e-mail communication in the IDE. It allows developers to seamlessly handle source code entities and e-mails concerning the source code, without ever exiting from the IDE. Using lightweight linking techniques, REmail retrieves all the e-mails relevant to the chosen source code entities and makes them available to the developer.

The Master thesis is focused on creation of an editor of CodAL language for the development toolkit of the project Lissom which is based on Eclipse framework. The goal of this thesis is to analyze the problem of editor creation and the features in existing editors which add some value to their usability. The outline of parser creation and subsequent code analysis of the source codes written into the editor is described in the theoretical part. It also explains the syntax and semantic aspects of the CodAL language. In the practical part the new CodAL language editor is designed and developed. The new CodAL language editor integrated into the development toolkit of the project Lissom is the final outcome of this thesis.

The goal of this master's thesis is a creation of dataset capturing selected users' activities, network analysis of this dataset, design and implementation of method to detect selected users' activities and discussion of achieved results. 4 devices have been chosen for the creation of this dataset.

This master thesis deals with ignition systems which are used in cars vehicles with gas engines and also with setting of the best moment of ignition of gasoline-air mixture in cylinders of engine. Ways of gas injection at diesel engines and their control systems are also described in this thesis. Next chapter deals with control unit and describes main actions which are necessary for today’s motor vehicles. As illustration is used example of succession of actions which are necessary for calculation and setting regular value of pre-ignition. At the end is shown animation, which can be used for practice lessons in a subject Automobile Electric and Electronic Systems as a example. It will simplify understanding of described activities which are all accomplished by central control unit. For purposes of laboratory lessons is in this thesis also discussed measuring of engine performance with changes of parameter of central control unit.

The aim of this work is to create framework for static analysis of Unix shell scripts.  Bourne-again shell is chosen as the primary subject of interest. The first part of the project discusses a principles of static analysis and current static analysis tools. The diploma thesis presents a framework based on modular system,   which enables plug-ins to perform different kinds of analysis on scripts. Framework includes plug-in management, means of interaction, handling outputs and input setting. This thesis also contains the description of a few plug-ins, designed to perform basic analysis of scripts.

Le biodiesel est un biocarburant, composé d'un mélange de mono-esters d'acide gras saturés et insaturés avec une longue chaîne carbonée. Ce travail de thèse présente les données de la littérature sur l'origine du biodiesel et son procédé de fabrication ; sont présentées aussi les performances et les émissions des moteurs diesel fonctionnant au biodiesel et la cinétique d'oxydation du biodiesel. Des efforts ont été faits pour mettre en évidence les principales différences entre les esters méthyliques et éthyliques tout en montrant que d'autres recherches sont encore à développer. Pour ces raisons, les délais d'auto-inflammation de cinq esters méthyliques et éthyliques ont été mesurés dans un tube à onde de choc : l'acrylate d'éthyle, l'acrylate de méthyle, le crotonate d'éthyle, le crotonate de méthyle et le butanoate d'éthyle. Les mécanismes cinétiques détaillés d'oxydation des cinq esters étudiés ont été générés automatiquement en utilisant le logiciel EXGAS. L'oxydation du butanoate d'éthyle, molécule modèle d'esters éthyliques d'huiles végétales (EEHV) a été étudiée dans un réacteur piston à pression atmosphérique pour une gamme de température allant de 500 à 1200 K. Les résultats représentent les profils de concentration des réactifs, les intermédiaires stables et les produits finaux. Le modèle cinétique a été validé de façon satisfaisante par une comparaison entre les résultats simulés et expérimentaux / An increasingly popular biofuel is biodiesel, composed of a mixture of saturated and unsaturated fatty acid methyl or ethyl esters, with a long aliphatic main chain. This PhD dissertation provides a literature review concerning the origin of biodiesel, its manufacturing process, performance and emissions of diesel engines fueled with biodiesel, and the kinetics of oxidation of biodiesel. Efforts were made to highlight the main differences between methyl and ethyl esters while showing where further research needs to be developed or pursued. For these reasons, the autoignition of five esters were measured behind reflected shock tube: ethyl acrylate, methyl acrylate, ethyl crotonate, methyl crotonate, and ethyl butanoate. Detailed mechanisms for the oxidation of the five studied esters were automatically generated using the version of EXGAS software. In addition, the oxidation of ethyl butanoate as a model compound for Fatty Acid Ethyl Esters (FAEE) has been investigated in tubular plug flow reactor at atmospheric pressure over wide range of temperature (500-1200 K). The results consist of concentration profiles of the reactants, stable intermediates, and final products. The model was again validated satisfactorily by comparison between computed results and the generated experimental data

There is increasing evidence that chronic inflammation is tightly linked to diseases associated with endothelial dysfunction, including the induction of aberrant angiogenesis. While leukocytes have been described as mediators of inflammation-associated angiogenesis, the effects of direct chronic endothelial activation have not been addressed in this context. Using an uncleavable mutant of the transmembrane form of tumor necrosis factor-α (TNF-α), we have established models of stable TNF-α expression in endothelial cells in vitro and in transgenic mice in vivo. In the in vitro model, continuous endothelial activation leads to increased leukocyte cellular adhesion molecule expression and intracellular reactive oxygen species, hallmarks of a proinflammatory and dysfunctional endothelium. In addition, stable expression of TNF-α in endothelial cells increased angiogenic sprout formation in the presence but also in the absence of angiogenic growth factors. The partial neutralization of this effect by TNF-α antibodies and the inability of conditioned media from stable TNF-α-expressing endothelial cells to induce angiogenic activities in control endothelial cells suggest that this effect does not require expression of additional autocrine factors, but is an autonomous effect of the transmembrane TNF on the endothelial cells. Furthermore, using the Matrigel plug assay in vivo, increased angiogenesis was observed in endothelial TNF-α-expressing transgenic versus control mice. In conclusion, chronic inflammatory changes mediated by TNF-α can induce angiogenesis in vitro and in vivo, suggesting endothelial cell activation as a direct link between inflammation and angiogenesis. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.