Spelling suggestions: "subject:"hollywood.""
21 |
Computer simulation of plywood manufacturing using the GASP IV language /Ulrich, Thierry Olivier P. January 1982 (has links)
Thesis (M.S.)--Oregon State University, 1983. / Typescript (photocopy). Includes bibliographical references (leaves 120-123). Also available on the World Wide Web.
|
22 |
Investigation and Prediction of the Sound Transmission Loss of Plywood ConstructionsWareing, Robin Richard January 2015 (has links)
The sound transmission loss of a range of plywood panels was measured to investigate the influence of the orthotropic stiffness of the plywood panels. The plywood panels were tested as single and also double leaf partitions, with a range of stud configurations. A new method was developed for predicting the sound transmission loss of single leaf partitions with both orthotropic and frequency dependent stiffness values.
The sound transmission loss was evaluated for two significantly different sample sizes. The observed influence of the sample size on the measured sound transmission loss was profound. The construction of the partition was shown to significantly affect the influence of the sample size on the sound transmission loss. A qualitative analysis based on existing published research of the contributing factors is presented, and methods for adjusting the results for the small sample size for comparison with the large results were developed.
The influence of a range of acoustic treatments of lightweight plywood partitions was investigated. The treatments involved internal viscoelastic materials and decoupled mass loaded barriers in various arrangements. The attachment between the treatment and the plywood panel was found to influence the sound transmission loss significantly. A prediction method based on published models was modified to allow the influence of the treatments to be included. Reasonable agreement was achieved between the predicted and measured results for a wide range of samples.
A prediction method was developed that accounts for the influence of orthotropic, frequency dependent material parameters. This method utilised an adaptive, numerical integration method to solve an analytical formulation for the sound transmission loss. The influence of the finite sample size was accounted for using an expression for the finite panel radiation impedance. The finite panel radiation impedance was predicted analytically and an approximation was also presented. The presence of a significant source room niche was accounted for by applying an appropriate limit to the integration range of the angle of incidence.
The prediction methods developed are compared with the measured transmission loss results from both the small and large test facilities. Good agreement was seen for some of the predicted results. Generally the agreement within the coincidence region was worse than for the rest of the transmission loss curve. The inclusion of orthotropic and frequency dependent stiffness values significantly improved the agreement within the coincidence region.
|
23 |
The use of plywood in airplane wing beamsHeck, George Emil. January 1925 (has links)
Thesis (M.S.)--University of Wisconsin, 1925. / eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references.
|
24 |
Radiant smoldering ignition of plywoodGratkowski, Mark T. January 2004 (has links)
Thesis (M.S.)--Worcester Polytechnic Institute. / Keywords: self-heating; smoldering ignition; plywood; bowes. Includes bibliographical references.
|
25 |
Development and structural testing of frp reinforced OSB panels FOR disaster resistant construction /Cassidy, Eric Dana, January 2002 (has links) (PDF)
Thesis (M.S.) in Civil Engineering--University of Maine, 2002. / Includes vita. Includes bibliographical references (leaves 136-141).
|
26 |
Determination of the design strength of thin structural veneer cladding panels /Winter, Gerrard Martin. January 2002 (has links) (PDF)
Thesis (Ph.D.) - University of Queensland, 2002. / Includes bibliography.
|
27 |
Development and characterization of new formaldehyde-free soy flour-based adhesives for making interior plywood /Huang, Jian. January 1900 (has links)
Thesis (M.S.)--Oregon State University, 2007. / Printout. Includes bibliographical references (leaves 85-91). Also available on the World Wide Web.
|
28 |
Sales forecasting in the plywood industryClark, Ronald Nicholson January 1964 (has links)
This thesis presents a general review of sales forecasting literature with particular attention to the preparation of the sales forecast, the pre-planning activities and the review. In addition, forecasts are developed which show the expected sales of domestic softwood plywood to be realized by the plywood industry for the years 1964 and 1968. A procedure is then presented that Crown Zellerbach Company can follow in using the industry forecast to ascertain their share of the expected softwood plywood sales.
Sales forecasting is an essential prerequisite to company planning. Therefore, forecasts must be as accurate as possible because many activities within the firm are based on the sales forecasts. With the assistance of sales forecasts, vital marketing, financial and production plans ultimately emerge, together with their supporting schedules.
The person responsible for the forecasting task must acquire not only a detailed understanding of company activities but also a thorough knowledge of the characteristics of a sound forecasting operation.
The forecaster must be familiar with the various judgment, survey and statistical techniques available for developing forecasts and he must understand the necessity of carrying out numerous pre-performance and post-performance activities. The pre-performance activities must be dutifully carried out if the most useful forecasting method is to be chosen. Post-performance activities are equally important. A time-table for review and revision when necessary must be drawn up ahead of time if proper control is to be exercised over the forecast.
A simple regression equation and three multiple regression equations are developed with the intention of using one or more of them to forecast industry softwood plywood sales for the years 1964 and 1968. The three multiple linear regression equations are rejected because each of them possesses one or more unacceptable negative constants. The simple linear regression equation has an extremely high coefficient of correlation and a small standard error of estimate. Since this equation contains these desirable features and seems to incorporate no underlying fallacy, this simple regression equation is the one chosen to forecast industry plywood sales.
The share-of-market approach is used to determine the proportion of the industry sales to be captured by Crown Zellerbach Company. The total projected industry sales figures are multiplied by a percentage which represents the company's present share of the total market. The figures that result represent the anticipated plywood sales to be achieved by Crown Zellerbach Company for the years 1964 and 1968.
Crown Zellerbach should not depend solely on the technique developed in this thesis for forecasting plywood sales. They should continue to use the subjective or judgment technique that they have used for a number of years, but they would follow a better course if they used one or more statistical or survey methods in addition to the present method. A final forecast could be selected after an analysis had been made of the forecasted figures developed by the various methods. / Business, Sauder School of / Marketing, Division of / Graduate
|
29 |
Developing a Bio-based Wood Composite using Refined Cottonseed Protein Adhesives.Stratton, Julianna Nicole 03 May 2019 (has links)
A growing market of environmentally-conscious consumers combined with a progression toward ‘greener’ products has caused the wood industry to investigate adhesives containing little to no formaldehyde. This study examines cottonseed proteins’ ability to bind southern yellow pine for plywood applications. Three-ply plywood panels were constructed with varying blends of cottonseed protein isolate (CSPI), soy protein, and phenol: formaldehyde adhesive. Wet and dry shear testing revealed that while the novel adhesives did not perform as well as a commercial control, the CSPI and soy adhesives generated similar shear strengths. Another set of boards were created, varying the CSPI amount added and the ratio of water. The powdered adhesive was spread at 15, 25, 35 and 45 lbs./1000 ft2 and the ratios of protein to water (w/w) were 0.5, 1.0, 1.5 and 2. The resulting boards were tested for internal bond strength (IB) using ASTM D1037 and the treatments were found to not be statistically different. Furthering the study into optimizing the temperature and time, the lowest amount and water ratio were used. The highest mean IB strength was obtained by pressing at 284°F (140 ℃). The highest mean IB strength for time was 10 minutes and produced IB strengths significantly different from all other pressing times. Temperature and time were not found to interact and therefore each affected the mean IB strength individually (p = 0.0553). Using the optimized time and temperature CSPI adhesive, commercial cottonseed meal (CM), water washed cottonseed meal (WW) and defatted cottonseed flour (DF) were used to decide if purity of the protein mattered and if the amount had changed. Using ASTMD1037, it was discovered that WW at 45 lbs./1000 ft2 had the highest mean internal bond strength. Boards made with CSPI adhesive alone and CSPI with guayule were tested for termite resistance, first by using hardwood veneer and later softwood, against the native subterranean termite Reticulitermes spp. Both tests were completed by AWPA E1-16 standard trials. Each was found that CSPI had a performance against termites that was not significantly different from guayule (a known antifeedant). CSPI’s ability to deter termites is a place for future exploration and is not looked at in depth in this study.
|
30 |
Evaluation of the durability of mass timber products against termites (Reticulitermes spp.) using choice testing.McGinnis, Jazmine A 01 May 2020 (has links)
Mass timber products are rapidly growing in fascination and popularity across the North American construction market, in which wood products are tested for durability and resiliency according to standards set by the American Wood Protection Association. Presently, the American Wood Protection Association (AWPA) E1 Standard calls for a test sample size of 2.54cm x 2.54cm x 0.64cm, which may be too small to encompass the large spacing between the bond lines of CLT, a multilayered mass timber product composed of layers of kiln-dried lumber alternating in grain direction. The objective of this study was to evaluate the resistance of untreated CLT against subterranean termites (Reticulitermes spp.) found in the southeastern United States using two-sample choice testing and extend the AWPA E1-17 Standard to accommodate the larger building material. Choice-testing methods were evaluated over a 4-week period for mass loss, visual rating, mold formation, and termite mortality.
|
Page generated in 0.0428 seconds