A purpose-built cylindrical resuspension chamber (V=0.437 m3 , S=0.35 m2 , S/V=8.38) was used for the dispersion of samples of soil and various kinds of dust. The samples were studied from the point of view of the number and mass distribution of aerosol particles which could affect the concentration of atmospheric aerosol. The samples were taken from lignite, power plant flue ash and from overburden soil in the North Bohemian surface mine Nastup. The individual samples were pneumatically dispersed inside the chamber under defined temperature-humidity conditions (20řC and relative humidity (RH) 50 %). An APS (Aerodynamic Particle Sizer) processing provided us with average size distributions of particle mass and number. Lignite and flue ash probably have the greatest potential impact on the concentration of atmospheric aerosol in the studied locality. The amount of the resuspended mass of the samples varied between 0.001 % (overburden soil) and 0.32 % (mine road). The lignite and flue ash samples were then analyzed by gravimetric methods using the HI (Harvard Impactor) and the SCI (Sioutas Cascade Impactor). The flue ash contained higher amounts of fine particles than the lignite. Subsequent chemical analysis by electron microscope of the filters with deposits of power plant flue ash showed that the PM2.5...

No description available.

This thesis deals with the issue of air pollution, emission of solid substance in the large-scale poultry. Compares the level of surface contamination inside the breeding facility, depending on the age of the poultry. The measurements were carried out in accordance with the applicable methodology for the evaluation and the determination of the concentration of dust particles PM10 in the selected large-scale poultry. Measurement was carried out in a large-scale broiler Farma u lesa in Sudoměřice u Bechyně. The aim of this work was to obtain a measurement and then evaluate the data obtained. The measurements were carried out in two rounds to measure two size fractions of solid pollutants. The DUST TRAK 8530, borrowed by the faculty, was used to measure the solid dust particles in bulge. Further, the thesis also describes description and measurement methodology with this device.

The rapid evolution of a turbulent world economy in recent years has caused problems to a large number of enterprises, especially those that operate in cyclical sectors of the economy. The aim of this thesis is the financial and economic analysis of the company Abydos s. r. o., which operates in the engineering industry and its main business is supplying components for the automotive industry. Another objective is to analyze selected parts of the manufacturing process and design optimization and measures that would help the company improve the process and thus improve economic results of the company.

The thesis is focused on the combine harvester in terms of noise and dust in the cabin, but also outside. The literature search is the basic data and concepts from areas combine harvesters, noise and dust. The actual measurements were carried out on the land at the four farmers. Measured the machines were different dates of manufacture. These are machines Fortschritt E 512 (1983), Fortschritt E 514 (1989), IH 2188 (1998) and Claas Avero 240 (2011). The results of measurement were graphically displayed and compared each other. The measured values were compared with the current legislation. These measurements showed that the noise does not just limit oldest machine. Dustiness been in this job for guidance only. Thanks dust measurements but we get a more complete view of the work environment in which the operator is exposed.

In my thesis I deal with dustiness from the surface down, respectively, from the quarry Jiří and the influence of dust on surrounding communities, which are in the immediate vicinity of the quarry. Because of changes to the law on air protection law of ranked in stationary sources related activities sorting and other cold coal preparation and surface mines fuels, ores, industrial and their processing, primarily mining. With respect to this change mining companies should pay more attention to dustiness issues that arise during the actual mining of coal transport and further treatment of raw material. The company Sokolovská uhelná, p.n., a.s., should soon prepare a project leading to reduce dust in near quarries. I evaluated here already established measures to reduce and disposal of dustiness produced in relation to mining activities and I tried suggest any other solution to eliminate dust.

Topic of this thesis is comparsion of emission concetration of solid pollutants in intensive poultry farming with different technologies. Measurement was done in cage system and two alternative poultry housing systems in company International poultry testing based in Ústrašice. For measurement of dust particles was used measurement device DUSTTRAK II 8530, own measurement has been done continuously for 24 hours with record every 3s. Dustiness was tracked in size fraction PM10. This dust particles can negatively influence health of employees and reared poultry. By measuring and following evaluation was found, that lowest value of dust particles was achieved in cage housing system. Considering health protection of employees and requirements for poultry wellfare is necessary keep dustiness of stable enviroment on lowest level.

The aim of this thesis was to make the evalution of the produced emissions of odorours substances and dust particles of PM 2,5 fraction from intensive poultry farming. Measurements were implemented according to the valid methodologies in poulty farm which is in Sudoměřice u Bechyně.

Among the considerable factors in poultry include climatic conditions, where the breeding takes place. This work focuses on the content of solid particles PM10 and PM2,5 occurring in this environment. These particles can negatively affect the health status of breeding and staff, ensuring the necessary care in poultry farming. Dust particles settle on the skin, where they have an irritant effect or are inhaled into the respiratory tract bodies of birds. These particles are transferred microorganisms causing a variety of diseases. It is therefore desirable to eliminate the amount of such particles to the maximum extent possible.

This thesis was focused on monitoring production of dust particles in poultry farming. This measurement was made with the Dusttrak II 8530 which monitored the environment in the stable every 3 seconds for 24 hours. For monitoring were selected companies in the South Bohemian Region, specifically MTD Ústrašice and Farma u lesa. Results of Dusttrak measurements showed that none of the stables exceeded the permissible limits of dust particles. Additionally microscopic analysis of the samples of dust particles revealed that the main component of source of dust was feed mixture.