Thesis (MTech (Chemical Engineering))--Cape Technikon, Cape Town, 2000 / In a typical gold-recovery plant, it is estimated that a substantial amount of the gold in residues may be in the form that is recoverable by cyanidation. The gold in residues can be ascribed broadly to (l) the presence of cyanicides, which consume the cyanide radical and thus inhibit dissolution of gold, (2) refractory gold resulting from coatings on some gold particles, (3) large gold particles incompletely dissolved due to inadequate contact time, (4) unliberated gold as a result of too coarse a milled product, and (5) gold dissolved during leaching, then adsorbed by other minerals or by carbonaceous matter in the pulp. This study focuses on the latter, where dissolved gold is pregrobbed during leaching by adsorbent materials in the ore. The term pregrobbing refers to the active adsorption ofgold from cyanide pregnant solutions by components ofthe ore. It has been suggested that gold already dissolved by cyanide may be adsorbed by other minerals and by carbonaceous matter in the pulp. The presence ofcarbonaceous matter in gold ores presents a two-fold problem namely, the poor release of gold from the carbonaceous matrix and the uptake of dissolved gold by the carbonaceous leach residues. Studies by several other investigators using ores from various parts of the world have similarly shown that the natural carbonaceous matter associated with refractory gold ores often behaves like activated carbon when in contact with aurocyanide solutions. Some debate also exists over the extent to which gold may be adsorbed onto the surfaces of minerals. Different authors have identified that minerals such as' pyrite, copper sulphides, quartz and layered silicates, such as kaolin, phlogopite and ilIite exhibit gold adsorbing properties. Activated carbon was first used as a model pregrobber in batch kinetic adsorption experiments in the presence of a gold selective strong base anion-exchange resin.