Spelling suggestions: "subject:"pulse wider modulated power converters""
1 |
Design And Implementation Of A Current Source Converter Based Active Power Filter For Medium Voltage ApplicationsTerciyanli, Alper 01 April 2010 (has links) (PDF)
This research work is devoted to the design, development and implementation of a Current Source Converter (CSC) based Active Power Filter (APF) for Medium Voltage (MV) applications. A new approach has been proposed to the design of the CSC based APF for reducing the converter kVA rating considerably. This design approach is called the Selective Harmonic Amplification Method (SHAM), and is based on the amplification of some selected harmoniccurrent components of the CSC by the input filter, and the CSC control system, which is specifically designed for this purpose. The proposed SHAM has been implemented on the first industrial CSC based APF for the elimination of 11th and 13th current harmonics of 12-pulse rectifiers fed from Medium Voltage (MV) underground cables in order to comply with IEEE Std. 519-1992. 450 kVA rated APF with only 205 kVA CSC rating has been connected to the MV bus via a coupling transformer of 600kVA, 34.5/1.1 kV. The power stage of the CSC based APF is composed of water-cooled high voltage IGBT and diode modules. Reference currents to be generated by the CSC are obtained by the use of a selective harmonic extraction method, by mploying synchronously rotating reference frames for each selected harmonic component. An Active damping method is also used to suppress the oscillations around the natural frequency of the input filter, excluding the harmonic components to be eliminated by APF. Simulation and field test results have shown that SHAM can successfully be applied to a CSC based APF for reduction of converter kVA rating, thus making it a cost- competitive alternative to voltage source converter based APFs traditionally used in industry applications.
|
2 |
Inversores Fonte Z monofásicos e conversor de dois estágios para sistemas fotovoltaicos sem TransformadorTENÓRIO JÚNIOR, Gilberto Alves 22 March 2016 (has links)
Submitted by Fabio Sobreira Campos da Costa (fabio.sobreira@ufpe.br) on 2017-07-11T12:39:13Z
No. of bitstreams: 2
license_rdf: 811 bytes, checksum: e39d27027a6cc9cb039ad269a5db8e34 (MD5)
Dissertação Mestrado M276 - Gilberto.pdf: 3559945 bytes, checksum: e0e92cec09c72c5a7b8b98260c3b9a8e (MD5) / Made available in DSpace on 2017-07-11T12:39:13Z (GMT). No. of bitstreams: 2
license_rdf: 811 bytes, checksum: e39d27027a6cc9cb039ad269a5db8e34 (MD5)
Dissertação Mestrado M276 - Gilberto.pdf: 3559945 bytes, checksum: e0e92cec09c72c5a7b8b98260c3b9a8e (MD5)
Previous issue date: 2016-03-22 / Este trabalho apresenta um estudo comparativo de conversores monofásicos aplicados a sistemas fotovoltaicos sem transformador. Topologias de inversores sem transformador têm menores custos, tamanho e peso. Contudo, a não utilização do transformador pode ser responsável por consideráveis valores de correntes de fuga. A associação em série de vários módulos fotovoltaicos se faz necessária para alcançar o nível de tensão desejado no barramento c.c.. Com o intuito de reduzir o número de módulos fotovoltaicos em série, topologias com característica de elevação de tensão (boost) podem ser utilizadas. Portanto, topologias que possuem estas características e que possam apresentar baixos valores de correntes de fuga devem ser escolhidas para o estudo. As topologias presentes neste trabalho são: o conversor de dois estágios, o inversor fonte Z monofásico com diodo adicional, e o inversor fonte Z de três estados. / This work presents a comparative study of single-phase converters applied to transformerless photovoltaic systems. Topologies of transformerless inverters have lower costs, size and weight. However, not using it may cause considerable amounts of leakage currents. The association in series of several PV modules is needed to achieve the voltage level desired in d.c. bus. In order to reduce the number of photovoltaic modules in series, topologies with voltage boost characteristic can be used. Therefore, topologies that have voltage boost characteristic and can have low leakage current values are chosen for the study. Topologies present in this work are: the two stages single-phase converter, the single-phase Z-source inverter with additional diode, and the single-phase three switch three state Z-source inverter.
|
Page generated in 0.1376 seconds