abstract: Test cost has become a significant portion of device cost and a bottleneck in high volume manufacturing. Increasing integration density and shrinking feature sizes increased test time/cost and reduce observability. Test engineers have to put a tremendous effort in order to maintain test cost within an acceptable budget. Unfortunately, there is not a single straightforward solution to the problem. Products that are tested have several application domains and distinct customer profiles. Some products are required to operate for long periods of time while others are required to be low cost and optimized for low cost. Multitude of constraints and goals make it impossible to find a single solution that work for all cases. Hence, test development/optimization is typically design/circuit dependent and even process specific. Therefore, test optimization cannot be performed using a single test approach, but necessitates a diversity of approaches. This works aims at addressing test cost minimization and test quality improvement at various levels. In the first chapter of the work, we investigate pre-silicon strategies, such as design for test and pre-silicon statistical simulation optimization. In the second chapter, we investigate efficient post-silicon test strategies, such as adaptive test, adaptive multi-site test, outlier analysis, and process shift detection/tracking. / Dissertation/Thesis / Ph.D. Electrical Engineering 2012

Recent advances in pervasive computing and peer-to-peer computing have opened up vast opportunities for developing collaborative applications. To benefit from these emerging technologies, there is a need for investigating techniques and tools that will allow development and deployment of these applications on mobile and heterogeneous platforms. To meet these challenging tasks, we need to address the typical characteristics of mobile peer-to-peer systems such as frequent disconnections, frequent network partitions, and peer heterogeneity. This research focuses on developing the necessary models, techniques and algorithms that will enable us to build and deploy collaborative applications in the Internet enabled, mobile peer-to-peer environments. This dissertation proposes a multi-state transaction model and develops a quality aware transaction processing framework to incorporate quality of service with transaction processing. It proposes adaptive ACID properties and develops a quality specification language to associate a quality level with transactions. In addition, this research develops a probabilistic concurrency control mechanism and a group based transaction commit protocol for mobile peer-to-peer systems that greatly reduces blockings in transactions and improves the transaction commit ratio. To the best of our knowledge, this is the first attempt to systematically support disconnection-tolerant and partition-tolerant transaction processing. This dissertation also develops a scalable directory service called PeerDS to support the above framework. It addresses the scalability and dynamism of the directory service from two aspects: peer-to-peer and push-pull hybrid interfaces. It also addresses peer heterogeneity and develops a new technique for load balancing in the peer-to-peer system. This technique comprises an improved routing algorithm for virtualized P2P overlay networks and a generalized Top-K server selection algorithm for load balancing, which could be optimized based on multiple factors such as proximity and cost. The proposed push-pull hybrid interfaces greatly reduce the overhead of directory servers caused by frequent queries from directory clients. In order to further improve the scalability of the push interface, this dissertation also studies and evaluates different filter indexing schemes through which the interests of each update could be calculated very efficiently. This dissertation was developed in conjunction with the middleware called System on Mobile Devices (SyD).

Software has been subject to change, at all times, in order to make parts of it, for instance, more reusable, better to understand by humans, or to increase efficiency under a certain point of view. Restructurings of existing software can be complex. To prevent developers from doing this manually, they got tools at hand being able to apply such restructurings automatically. These automatic changes of existing software to improve quality while preserving its behaviour is called refactoring. Refactoring is well investigated for programming languages and mature tools exist for executing refactorings in integrated development environments (IDEs). In recent years, the development paradigm of Model-Driven Software Development (MDSD) became more and more popular and we experience a shift in the sense that development artefacts are considered as models which conform metamodels. This can be understood as abstraction, which resulted in the trend that a plethora of new so-called model-based Domain-Specific Languages (DSLs) arose. DSLs have become an integral part in the MDSD and it is obvious that models are subject to change, as well. Thus, refactoring support is required for DSLs in order to prevent users from doing it manually. The problem is that the amount of DSLs is huge and refactorings should not be implemented for new for each of them, since they are quite similar from an abstract viewing. Existing approaches abstract from the target language, which is not flexible enough because some assumptions about the languages have to be made and arbitrary DSLs are not supported. Furthermore, the relation between a strategy which finds model deficiencies that should be improved, a resolving refactoring, and the improved quality is only implicit. Focussing on a particular quality and only detecting those deficiencies deteriorating this quality is difficult, and elements of detected deficient structures cannot be referred to in the resolving refactoring. In addition, heterogeneous models in an IDE might be connected physically or logically, thus, they are dependent. Finding such connections is difficult and can hardly be achieved manually. Applying a restructuring in a model implied by a refactoring in a dependent model must also be a refactoring, in order to preserve the meaning. Thus, this kind of dependent refactorings require an appropriate abstraction mechanism, since they must be specified for dependent models of different DSLs. The first contribution, Role-Based Generic Model Refactoring, uses role models to abstract from refactorings instead of the target languages. Thus, participating structures in a refactoring can be specified generically by means of role models. As a consequence, arbitrary model-based DSLs are supported, since this approach does not make any assumptions regarding the target languages. Our second contribution, Role-Based Quality Smells, is a conceptual framework and correlates deficiencies, their deteriorated qualities, and resolving refactorings. Roles are used to abstract from the causing structures of a deficiency, which then are subject to resolving refactorings. The third contribution, Role-Based Co-Refactoring, employs the graph-logic isomorphism to detect dependencies between models. Dependent refactorings, which we call co-refactorings, are specified on the basis of roles for being independent from particular target DSLs. All introduced concepts are implemented in our tool Refactory. An evaluation in different scenarios complements the thesis. It shows that role models emerged as very powerful regarding the reuse of generic refactorings in arbitrary languages. Role models are suited as an interface for certain structures which are to be refactored, scanned for deficiencies, or co-refactored. All of the presented approaches benefit from it.

Software has been subject to change, at all times, in order to make parts of it, for instance, more reusable, better to understand by humans, or to increase efficiency under a certain point of view. Restructurings of existing software can be complex. To prevent developers from doing this manually, they got tools at hand being able to apply such restructurings automatically. These automatic changes of existing software to improve quality while preserving its behaviour is called refactoring. Refactoring is well investigated for programming languages and mature tools exist for executing refactorings in integrated development environments (IDEs). In recent years, the development paradigm of Model-Driven Software Development (MDSD) became more and more popular and we experience a shift in the sense that development artefacts are considered as models which conform metamodels. This can be understood as abstraction, which resulted in the trend that a plethora of new so-called model-based Domain-Specific Languages (DSLs) arose. DSLs have become an integral part in the MDSD and it is obvious that models are subject to change, as well. Thus, refactoring support is required for DSLs in order to prevent users from doing it manually. The problem is that the amount of DSLs is huge and refactorings should not be implemented for new for each of them, since they are quite similar from an abstract viewing. Existing approaches abstract from the target language, which is not flexible enough because some assumptions about the languages have to be made and arbitrary DSLs are not supported. Furthermore, the relation between a strategy which finds model deficiencies that should be improved, a resolving refactoring, and the improved quality is only implicit. Focussing on a particular quality and only detecting those deficiencies deteriorating this quality is difficult, and elements of detected deficient structures cannot be referred to in the resolving refactoring. In addition, heterogeneous models in an IDE might be connected physically or logically, thus, they are dependent. Finding such connections is difficult and can hardly be achieved manually. Applying a restructuring in a model implied by a refactoring in a dependent model must also be a refactoring, in order to preserve the meaning. Thus, this kind of dependent refactorings require an appropriate abstraction mechanism, since they must be specified for dependent models of different DSLs. The first contribution, Role-Based Generic Model Refactoring, uses role models to abstract from refactorings instead of the target languages. Thus, participating structures in a refactoring can be specified generically by means of role models. As a consequence, arbitrary model-based DSLs are supported, since this approach does not make any assumptions regarding the target languages. Our second contribution, Role-Based Quality Smells, is a conceptual framework and correlates deficiencies, their deteriorated qualities, and resolving refactorings. Roles are used to abstract from the causing structures of a deficiency, which then are subject to resolving refactorings. The third contribution, Role-Based Co-Refactoring, employs the graph-logic isomorphism to detect dependencies between models. Dependent refactorings, which we call co-refactorings, are specified on the basis of roles for being independent from particular target DSLs. All introduced concepts are implemented in our tool Refactory. An evaluation in different scenarios complements the thesis. It shows that role models emerged as very powerful regarding the reuse of generic refactorings in arbitrary languages. Role models are suited as an interface for certain structures which are to be refactored, scanned for deficiencies, or co-refactored. All of the presented approaches benefit from it.:List of Figures xv List of Tables xvii List of Listings xix 1. Introduction 1 1.1. Language-Tool Generation Without Consideration Of Time And Space . . . . . 4 1.2. Challenges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.3. Generic Quality-Aware Refactoring and Co-Refactoring in Heterogeneous Model Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2. Foundations 15 2.1. Refactoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2.2. Model-Driven Software Development . . . . . . . . . . . . . . . . . . . . . . . . 16 2.2.1. Levels of Abstraction and Metamodelling . . . . . . . . . . . . . . . . . 17 2.2.2. Model Transformations . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2.3. Role-Based Modelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 3. Related Work 23 3.1. Model Refactoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 3.1.1. Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 3.1.2. Literature Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 3.1.3. Evaluation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 3.2. Determination of Quality-Related De ciencies . . . . . . . . . . . . . . . . . . . 32 3.2.1. Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 3.2.2. Literature Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 3.2.3. Evaluation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 3.3. Co-Refactoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 3.3.1. Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 3.3.2. Literature Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 3.3.3. Evaluation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 3.4. Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 4. Role-Based Generic Model Refactoring 51 4.1. Motivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 4.2. Specifying Generic Refactorings with Role Models . . . . . . . . . . . . . . . . . 53 4.2.1. Specifying Structural Constraints using Role Models . . . . . . . . . . . 55 4.2.2. Mapping Roles to Language Concepts Using Role Mappings . . . . . . . 57 4.2.3. Specifying Language-Independent Transformations using Refactoring Speci cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 4.2.4. Composition of Refactorings . . . . . . . . . . . . . . . . . . . . . . . . . 67 4.3. Preserving Semantics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 4.4. Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 5. Suggesting Role Mappings as Concrete Refactorings 73 5.1. Motivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 5.2. Automatic Derivation of Suggestions for Role Mappings with Graph Querying . 74 5.3. Reduction of the Number of Valid Matches . . . . . . . . . . . . . . . . . . . . . 76 5.4. Comparison to Model Matching . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 5.5. Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 6. Role-Based Quality Smells as Refactoring Indicator 79 6.1. Motivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 6.2. Correlating Model De ciencies, Qualities and Refactorings . . . . . . . . . . . . 80 6.2.1. Quality Smell Repository . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 6.2.2. Quality Smell Calculation Repository . . . . . . . . . . . . . . . . . . . . 85 6.3. Discussion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 6.4. Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 7. A Quality Smell Catalogue for Android Applications 89 7.1. Quality Smell Catalogue Schema . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 7.2. Acquiring Quality Smells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 7.3. Structure-Based Quality Smells—A Detailed Example . . . . . . . . . . . . . . . 92 7.3.1. The Pattern Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 7.3.2. Quality Smell: Interruption from Background . . . . . . . . . . . . . . . 93 7.4. Quality Smells for Android Applications . . . . . . . . . . . . . . . . . . . . . . 96 7.4.1. Quality Smell: Data Transmission Without Compression . . . . . . . . . 96 7.4.2. Quality Smell: Dropped Data . . . . . . . . . . . . . . . . . . . . . . . . 98 7.4.3. Quality Smell: Durable WakeLock . . . . . . . . . . . . . . . . . . . . . 98 7.4.4. Quality Smell: Internal Use of Getters/Setters . . . . . . . . . . . . . . . 99 7.4.5. Quality Smell: No Low Memory Resolver . . . . . . . . . . . . . . . . . 101 7.4.6. Quality Smell: Rigid AlarmManager . . . . . . . . . . . . . . . . . . . . 101 7.4.7. Quality Smell: Unclosed Closeable . . . . . . . . . . . . . . . . . . . . . 102 7.4.8. Quality Smell: Untouchable . . . . . . . . . . . . . . . . . . . . . . . . . 103 7.5. Discussion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 8. Role-Based Co-Refactoring in Multi-Language Development Environments 105 8.1. Motivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 8.2. Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 8.3. Dependency Knowledge Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 8.3.1. Categories of Model Dependencies . . . . . . . . . . . . . . . . . . . . . 108 8.3.2. When to Determine Model Dependencies . . . . . . . . . . . . . . . . . 110 8.3.3. How to Determine Model Dependencies . . . . . . . . . . . . . . . . . . 111 8.4. Co-Refactoring Knowledge Base . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 8.4.1. Specifying Coupled Refactorings with Co-Refactoring Speci cations . . 114 8.4.2. Specifying Bindings for Co-Refactorings . . . . . . . . . . . . . . . . . . 116 8.4.3. Determination of Co-Refactoring Speci cations . . . . . . . . . . . . . . 118 8.5. Discussion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 8.6. Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 9. Refactory: An Eclipse Tool For Quality-Aware Refactoring and Co-Refactoring 121 9.1. Refactoring Framework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 9.1.1. Role Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 9.1.2. Refactoring Speci cation . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 9.1.3. Role Model Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 9.1.4. Refactoring Composition . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 9.1.5. Custom Refactoring Extensions . . . . . . . . . . . . . . . . . . . . . . . 129 9.1.6. Pre- and Post-conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 9.1.7. Integration Into the Eclipse Refactoring Framework . . . . . . . . . . . . 130 9.2. Quality Smell Framework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 9.3. Co-Refactoring Framework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 9.3.1. Concrete Syntax of a CoRefSpec . . . . . . . . . . . . . . . . . . . . . . . 138 9.3.2. Expression Evaluation by Using an Expression Language . . . . . . . . . 138 9.3.3. UI and Integration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 9.4. Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 10. Evaluation 143 10.1. Case Study: Reuse of Generic Refactorings in many DSLs . . . . . . . . . . . . . 143 10.1.1. Threats to validity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 10.1.2. Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 10.1.3. Experience Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 10.2. Case Study: Suggestion of Valid Role Mappings . . . . . . . . . . . . . . . . . . 147 10.2.1. Implementation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 10.2.2. Evaluation and Discussion . . . . . . . . . . . . . . . . . . . . . . . . . . 151 10.3. Proof of Concept: Co-Refactoring OWL and Ecore Models . . . . . . . . . . . . 155 10.3.1. Coupled OWL-Ecore Refactorings . . . . . . . . . . . . . . . . . . . . . 156 10.3.2. Realisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 10.3.3. Discussion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 11. Summary, Conclusion and Outlook 161 11.1. Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 11.2. Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 11.3. Outlook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Appendix 169 A. List of Role Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 B. Comparison to Role Feature Model . . . . . . . . . . . . . . . . . . . . . . . . . 171 C. Complete List of Role Mappings . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 D. List of all IncPL Patterns for Detecting Quality Smells . . . . . . . . . . . . . . . 176 E. Post-Processor of the Extract CompositeState refactoring for UML State Machines 183 F. Speci cation of the Conference Language . . . . . . . . . . . . . . . . . . . . . . 185 List of Abbreviations 187 Bibliography 191