In nature, through millions of years of evolution, fish and cetaceans have developed fast efficient and highly manoeuvrable methods of marine propulsion. A recent explosion in demand for sub sea robotics, for conducting tasks such as sub sea exploration and survey has left developers desiring to capture some of the novel mechanisms evolved by fish and cetaceans to increase the efficiency of speed and manoeuvrability of sub sea robots. Research has revealed that interactions with vortices and other unsteady fluid effects play a significant role in the efficiency of fish and cetaceans. However attempts to duplicate this with robotic fish have been limited by the difficulty of predicting or sensing such uncertain fluid effects. This study aims to develop a gait generation method for a robotic fish with a degree of passivity which could allow the body to dynamically interact with and potentially synchronise with vortices within the flow without the need to actually sense them. In this study this is achieved through the development of a novel energy based gait generation tactic, where the gait of the robotic fish is determined through regulation of the state energy rather than absolute state position. Rather than treating fluid interactions as undesirable disturbances and `fighting' them to maintain a rigid geometric defined gait, energy based control allows the disturbances to the system generated by vortices in the surrounding flow to contribute to the energy of the system and hence the dynamic motion. Three different energy controllers are presented within this thesis, a deadbeat energy controller equivalent to an analytically optimised model predictive controller, a $H_\infty$ disturbance rejecting controller with a novel gradient decent optimisation and finally a error feedback controller with a novel alternative error metric. The controllers were tested on a robotic fish simulation platform developed within this project. The simulation platform consisted of the solution of a series of ordinary differential equations for solid body dynamics coupled with a finite element incompressible fluid dynamic simulation of the surrounding flow. results demonstrated the effectiveness of the energy based control approach and illustrate the importance of choice of controller in performance.

No description available.

In this thesis study, a two-fingered gripper and a four-fingered multipurpose gripper are developed and manufactured. In addition to development of robotic hands, computer control hardware and software are also developed for computer control of both hands. The two-fingered gripper is designed for a specially defined pick and place operation. Its task is to pick a cylindrical work piece and place it in the appropriate position in a flexible manufacturing cell. Pneumatic actuator is used for power generation and mechanical links are used for power transmission. Fourfingered gripper is designed as a multipurpose gripper. The task is not predefined for this gripper, so, human hand and previous dexterous hands are taken as model during design. It consists of 3 fingers and a thumb. It has 1 degree of freedom for every finger and thumb. Pneumatic actuators are also used for this gripper. Rope and pulley system is used for the power transmission mechanism. Structures of both hands are manufactured from 5083 series aluminum. Gripping force can be controlled by the pressure regulator of the pneumatic system for both hands. Computer software is developed for the control of open and close motion of the fingers. Also, a motion control card is designed and manufactured for control of the pneumatic valves.