This master thesis deals with analysis of manipulators. After proposing several possibilities of some manipulator that are contemporary being used, there is suggested structural design for demanded motor manipulator. The proposed manipulator will be used for final control of crankcase for Zetor´s tractor.

This work is about construcion of a manipulator to be used in paper manufacturing. The manipulator is desinged to turn a package of cellulose placed on a roller conveyor. Turning of the package is necessary for unwrapping and cleaness control of cellulose. Design was made based on analytical calculation and was verified using computer simulation. Pneumatic valves and an electric motor were utilized in the manipulator. The manipulator operates automatically.

The aim of this thesis is to design a mechanical manipulator. Work includes variants kinematics stroke belt conveyor, belt functional calculations belt and roller conveyor and risk analysis (the basis for the Declaration of Conformity) and FMEA analysis.

This master thesis deals with current possibilities on field of automation material transport systems in manufacture. Based on demands of conveyor-system behavior, work offers possible solution for automatic conveyor loop system, which is used later for evaluate efficiency, wear and mechanical problems and opportunities for possible future improvements. Work describes hardware and engineering software which is used for programming and parameterization.

In this master thesis is structural design modular roller conveyor which is part of the flexible assembly line automotive seats. The work includes design and functional solution for driven roller track. Present structural design of roller conveyors is summarized in the first part work.

The diploma thesis deals with the design of mechanism for manipulation with bars and creating a batch of square steel bars. In intoduction of this thesis is describtion of principle of curent mechanisms. In following chapters are described the most important parts of new mechanism and their design. In final sections are risk analysis and financial evaluation.

This master thesis deals with a structural design of the modular roller conveyor which is part of the flexible assembly line of automotive seats. The work includes design and functional solution for a driven roller track. Present structural design of roller conveyors is summarized in the first part of the work.

This master’s thesis deals with the design of the manipulator for rotating objects, especially workpieces, semifinished products, or complete products around horizontal axis. It’s the manipulator for objects where is needed change orientation during production process. This thesis describes step by step construction of individual components of the manipulator and calculations of propulsive units. At the beginning the conveyor roller with propulsive unit is designed. The next step is construction of scissor lift table and choice of the propulsive unit. There is also made FEM analysis for the scissor mechanism. The next unit is aimed to the construction and computation of rotating and telescopic jaw. Then hydraulic circuit with computation of the propulsive unit is designed. As the final step the appropriate type of sensors are chosen and the step diagram of the manipulator is made. The manipulator is designed in the 3D model program and there are also made some assembly drawings.

The thesis is focused on proposal of automatic transport feeder that can be used for injection moulding machines. It is concerned with conveyor belt, gravitational roller line and lift. Proposal of construction of automatic transport feeder, calculation of drive for conveyor belt and driven line is contained in this thesis. There is calculation of driveshaft, proposal of spring and calculation of bearing lifetime. Angle of conveyor of gravimetric roller line and speed at the end are calculated. Calculation of proposal of drive for lift and proposal of drive roller line on the lift is here. This thesis contains senzor, operation and steering, safety protection of feeder. There are applicability of robotic workplace and economic calculation at the end of thesis.

The aim of this thesis is to create the design of a robotic workstation (RWS) for storing bags on a pallets with a capacity of 600 bags per hour. As an introduction to the issues of solved task, the introductory part of the thesis deals with a general information about industrial robots, theories ofdesigning RWS and palletization. For the suggested workstation it is given to have one pickup place from the roller conveyor and two unloading places. Within the RWS it is used belt, roller and chain conveyors as a peripheral device for conveying bags and pallets. There are two variants of RWS created for the possibility of technically - economic assessment. Solution for the security and the ergonomy of the workplace are an integral part of the study. Selected components of RWS have their risk analysis carried out. There is also the draft of a robot gripper mentioned, including assembly drawing. In conclussion there is calculation of returning of funds invested in the construction of RWS. Drawings of robotized workplace disposition, schemes of pneumatic and electrical connections and block diagram of the control system of RWS are included as attachments.