81 |
Testování protokolů pro video na vyžádání v programu Apache JMeter / Video on Demand Protocols Testing using Apache JMeterSrnec, Tomáš January 2018 (has links)
The master’s thesis deals with testing the application protocol HLS and RTSP in JMeter program. The aim of this thesis is to design and implement a test modules for both protocols, which will perform stress tests. The first part of thesis describes the types of stress tests, JMeter program for performance testing and video on demand services. Next chapter describes selected protokols, especially HLS and RTSP, which are used in this thesis. The practical part contains the design and implementation of test modules including test plans. Finally, the results are processed and commented.
|
82 |
Lokace volajícího při tísňových hovorech VoIP / Location of VoIP caller in emergencyMrník, Martin January 2013 (has links)
This master thesis deals with the problem of localization of the caller to the emergency line with focus on VoIP calls. It contains general description of the main active and passive geolocation methods, and explains their function. The paper analyzes market share of different VoIP clients and describes the program Skype. The focus of this work is to create an application for geolocation of the caller using analysis of VoIP transmission. The application gains IP address of the caller by capturing packets and displays his/her location on the map. The coordinates are obtained from the MaxMind GeoLite City database which been chosen by evaluating objective parameters as the most suitable for desired use.
|
83 |
Voice over IP - Eine EinführungFey, Marcus 04 February 2006 (has links)
Eine kurze Einführung zu "Voice over IP" (dem Telefonieren über Datennetze).
Es wird ein Überblick über technische Anforderungen und Lösungen geben. Behandelte Gebiete sind Audio-Codecs, das Transportprotokoll RTP sowie die Signalisierungsdienste SIP und H.323.
|
84 |
Preparation And Characterization Of Cigss Solar Cells And Pv Module Data AnalysisShirolikar, Jyoti 01 January 2005 (has links)
In this thesis, multiple activities have been carried out in order to improve the process of CIGSS solar cell fabrication on a 4" x 4" substrate. The process of CIGSS solar cell fabrication at FSEC's PV Materials Lab involves a series of steps that were all carried out manually in the past. A LABVIEW program has been written to carry out automated sputter deposition of Mo back contact, CuGa, In metallic precursors on a soda lime glass substrate using a stepper motor control for better uniformity. Further, selenization/ sulfurization of these precursors was carried out using rapid thermal processing (RTP). CIGS films were sulfurized using chemical bath deposition (CBD). ZnO:Al was deposited on the CIGSS films using RF sputtering. A separate LABVIEW program was written to automate the process of ZnO:Al deposition. Ni/Al contact fingers were deposited on the ZnO:Al layer using the e-beam evaporation technique. Further, in order to test these solar cells in-house, a simple current-voltage (IV) tracer was fabricated using LABVIEW. A quantum efficiency (QE) measurement setup was built with guidance from the National Renewable Energy Laboratory (NREL). Lastly, analysis of data from photovoltaic (PV) modules installed on the FSEC test site has been carried out using a LABVIEW program in order to find out their rate of degradation as time progresses. A 'C' program has also been written as an aid for keeping a daily log of errors in data and for troubleshooting of the same.
|
85 |
Privacy Ensuring SRTP for Cloud ConferencingHaider, Maria January 2016 (has links)
Multimedia conferences held using services provided by clouds owned by third party companies are becoming increasingly popular. While using such services, end users will want to keep their audio/video data private when they pass through the servers situated in the cloud. Application of SRTP (Secure Real-time Transport Protocol) in such use cases fail to provide the desired privacy because it leads to sharing the master keys for encryption and authentication of the media content with the semi trusted media servers of the cloud. As a solution, modifications of SRTP are proposed in this thesis with the result of redesigning the security mechanisms of RTP header extensions and RTCP packets by separating the cryptographic contexts and keying materials for protecting end-to-end sensitive data. A couple of design choices for key management through DTLS-SRTP for Cloud conferencingare also proposed. Moreover, analysis of existing solutions for modifying SRTP packets for cloud conferences have also been carried out in this project. The solutions are found by studying related protocols, understating the problems and analyzing current solutions if there were any. The proposed solutions show different alternatives to solve a specific problem and their tradeoffs in terms of complexity and compatibility with current standards.
|
86 |
新世代電信級網路電話(VoIP)客戶服務之研究 / The study of customer service for carrier grade next generation network (VoIP)徐志得, Hsu, Heigen Unknown Date (has links)
在電信獨占市場的時代,語音及訊務都架設在TDM (時間分割多工)的系統上,其客戶服務比新世代網路系統較為簡易。1997年,政府開放行動電話營運執照申請,在2008年第一季末,手機門號(包含2G+PHS+3G)幾乎與人口(2300萬戶)ㄧ樣多。2000年,政府開放固網執照申請,因為固網路鋪設到last-mile的速度緩慢及成本較高,「新進業者」(CLEC)比「既有經營者」(ILEC)較不具備競爭力,加上無killer application (殺手級應用)及差異性的客服,因此至今CLEC沒有爭取到太多的顧客,一直到Skype進入台灣,大家才看到電信語音市場另一塊新版圖。
近年來VoIP (Voice Over IP)技術進步,將通訊協定信號(SIP)與媒體語音訊務(RTP/RTCP)分開處理。因此,全世界各通信製造業者及服務商(SP)開始運用此技術在行動電話多媒體服務及IP多媒體子系統(IMS)的架構上。不僅如此,有很多網路用戶與互聯網企業也因為開始分享資訊,造成一些新興內容產業--(UGC用戶產生內容、SNS社會網絡服務) 的誕生。所以預料在新世代電信網路(NGN)新科技的環境之下,將會有不少新興產業如海星組織一般的誕生、滋長及蔓延,這對電信業者、服務供應商及用戶將會帶來更多維護及服務的衝擊。
因此本研究將參考現有電信客戶服務跟未來20年通信技術,建議如何使用混合式(集權/分權)的客戶服務來協助電信級固網業者及服務開發者去創造企業價值、突破現有困境、達到永續經營的目的,以因應未來電信自由化及新電信技術。 / In the monopoly era, the telecom network was implemented on TDM (Time Division Multiplexer) system, whose customer service of voice call is comparatively simpler and easier than NGN (Next Generation Network) system. In 1997, government opened the application of mobile network operation license. By end of 1Q of 2008, the subscriber count (includes 2G, PHS and 3G) of mobile network was almost as many as population (23 millions). In the year of 2000, government opened the application of fixed network operation license. Because of the slower speed and higher cost of last-mile network implementation, up to now, new Competitive Local Exchange Carriers (CLEC) were less competitive than Incumbent Local Exchange Carrier (ILEC). Plus, not having the killer-application and the differentiated customer services, CLECs did not have too many subscribers in these years. Until Skype was introduced to Taiwan, all of us, then, saw the other new territory of voice telecom market.
These years, VoIP (Voice over IP) technology was improved to have communication protocol (SIP Session Initialization Protocol) and voice traffic (RTP/RTCP Real-time Transport Protocol/Real-time Transport Control Protocol) been handled separately; i.e., the development of voice application software and debug became easier. Thus, the world-wide telecom manufacturers and service providers started to use this technology on the architecture of mobile voice multimedia service and IP Multi-media Subsystem (IMS). Even amount of network users were sharing information with enterprises who owned inter-connection network, and created the new content businesses (UGC User Generated Content, SNS Social Network Services). Therefore, under the new technology environment of NGN, we foresee some new businesses will be created, then, growing and expanding like the starfish organization. For telecom operators, service providers and users, this will bring some more new impacts of maintenance and service.
Therefore, this study will refer the existing telecom customer service and the telecom technologies may have in next coming 20 years to propose how to use the hybrid (centralized/de-centralized) customer service to help both carrier-grade fixed network operators and service developers to create business value, break through current dilemma to reach business continuity goal in response to the telecom liberalization and new telecom technologies.
|
87 |
Síntese, caracterização e avaliação das propriedades catalíticas de VOx/Ta2O5-Al2O3 para a reação de decomposição do isopropanol / Synthesis, characterization and catalytic properties evaluation of VOx/Ta2O5-Al2O3 catalysts for isopropanol decomposition reactionRegina de Paiva Souto Wuó 30 September 2010 (has links)
Catalisadores à base de óxidos metálicos têm sido muito utilizados nas indústrias do petróleo, de química fina e no controle de poluição. A seleção adequada do óxido metálico como suporte, do catalisador e o uso de coberturas superficiais menores que uma monocamada dos componentes ativos, onde somente espécies MOx estão presentes sobre a superfície dos óxidos suportes, pode ser uma exigência para modificar as propriedades catalíticas de modo a obter uma boa eficiência do catalisador durante a reação. Óxidos metálicos do grupo V suportados têm uma grande variedade de aplicações catalíticas, e têm sido extensivamente investigados nos últimos anos. Catalisadores à base de óxido de vanádio suportado possuem excelentes propriedades redox e são principalmente empregados como catalisadores em processos de oxidação seletiva. Óxido de tântalo mássico é um sólido ácido com propriedades catalíticas e diversas aplicações têm sido reportadas. O suporte foi preparado pelo método de coprecipitação, utilizando proporções de 15 e 30% p/p de Ta2O5 em Al2O3. A adição de V2O5 sobre o suporte Ta2O5-Al2O3 foi realizada através de impregnação úmida com excesso de solvente, água, formando catalisadores com 2, 4 e 8 átomos de vanádio/nm². A fim de alcançar o objetivo deste trabalho, as seguintes técnicas de caracterização foram utilizadas: volumetria de N2 para determinação da área específica e volume de poros, redução à temperatura programada (RTP), difratometria de raios-X (XRD), espectroscopia na região do infravermelho com transformada de Fourier (FTIR), FTIR com adsorção de piridina e espectroscopia Laser Raman. As propriedades ácidas e/ou básicas dos suportes e catalisadores foram avaliadas através da reação de decomposição do isopropanol. As propriedades texturais do suporte foram modificadas pela adição crescente do vanádio ao suporte, efeito este atribuído ao bloqueio dos microporos pelas espécies de vanádio superficiais. A metodologia empregada na preparação do suporte revelou um material amorfo ao DRX. Nos catalisadores, a adição crescente de vanádio promove a formação de cristais de V2O5 superficiais nas amostras com 4 e 8 átomos de V/nm². Nos resultados de RTP, os catalisadores apresentaram um único pico de redução do vanádio que corresponde à redução de V2O5 a V6O13. Nas análises de FTIR com adsorção de piridina verificou-se a diminuição da força dos sítios ácidos de Lewis, presentes em todos os catalisadores, com a adição de vanádio. Somente nos catalisadores com 8 átomos de V/nm² foram detectadas bandas referentes a sítios ácidos de Br?nsted. Nas análises de espectroscopia Raman não foi observada nenhuma banda característica de espécies VOx isoladas nas amostras, porém para coberturas abaixo de uma monocamada de V foram observadas bandas de espécies poliméricas. Bandas Raman de cristais de V2O5 foram características somente na amostra com 8 átomos de V/nm². A presença de sítios ácidos foi confirmada pela presença de propeno e éter diisopropílico como produtos da desidratação do isopropanol em todos os catalisadores. Com a adição de vanádio, sítios básicos ou redox também foram verificados pela presença de acetona produzida pela desidrogenação do isopropanol. / Metal oxides based catalysts have been very used in petroleum industry, fine chemical and pollution control. The adequate selection of the metal oxide as a support and catalyst, and the use of superficial covering with active compounds lower than a monolayer, where only MOx species are present on the support oxide surface, can be a requirement to modify the catalytic properties in order to have a good catalyst efficiency during the reaction. Supported metal oxides of group V have a large variety of catalytic applications, and have been widely investigated in the last years. Supported vanadium oxide based catalysts have excellent redox properties and they are mainly used as selective oxidation catalyst. Tantalum oxide is an acid solid with catalytic properties and many applications of supported tantalum oxide based catalysts have been reported. The supports were prepared by coprecipitation method, using the proportions of 15 and 30% of Ta2O5 in Al2O3. The addition of V2O5 on the support Ta2O5-Al2O3 was performed using the wet impregnation method with excess of solvent, water, forming catalysts with 2, 4 and 8 atoms of V/nm². In order to achieve the purpose of this work, the following characterization techniques were used: N2 volumetry to determine specific area and pore volume, temperature programmed reduction (TPR), X-ray difratometry, Fourier transform infrared spectroscopy (FTIR) and Laser Raman spectroscopy. The acid/ basic properties of the support and catalysts were evaluated through isopropanol decomposition reaction. The textural properties of the supported were modified by the increasing addition of vanadium, effect attributed to micropores blocked by superficial vanadium species. The used methodology in the support preparation showed an amorphous material to XRD. In the catalysts, the increasing addition of vanadium promotes the formation of V2O5 superficial crystals in the samples with 4 and 8 atoms of V/nm². In the TPR results, the catalysts presented only one reduction peak corresponding to the V2O5 a V6O13 reduction. In the FTIR analysis with adsorbed pyridine, it was observed a decrease of acidity at Lewis acid sites, which were present in all catalysts samples. In the Raman spectroscopy analysis, it was not observed any characteristic band of isolated VOx species in the sample, although covering lower than a monolayer of vanadium, it was observed V=O bands due to surface polymeric vanadium oxide species. V2O5 crystal Raman bands were characteristics only in samples with 8 atoms of V/nm². The presence of acid sites was confirmed by the production of propane and diisopropyl ether as product of isopropanol dehydratation, observed for all catalysts. With V charge, basic and redox sites were verified as well by the production of acetone at isopropanol dehydrogenation.
|
88 |
Síntese, caracterização e avaliação das propriedades catalíticas de VOx/Ta2O5-Al2O3 para a reação de decomposição do isopropanol / Synthesis, characterization and catalytic properties evaluation of VOx/Ta2O5-Al2O3 catalysts for isopropanol decomposition reactionWuó, Regina de Paiva Souto 30 September 2010 (has links)
Catalisadores à base de óxidos metálicos têm sido muito utilizados nas indústrias do petróleo, de química fina e no controle de poluição. A seleção adequada do óxido metálico como suporte, do catalisador e o uso de coberturas superficiais menores que uma monocamada dos componentes ativos, onde somente espécies MOx estão presentes sobre a superfície dos óxidos suportes, pode ser uma exigência para modificar as propriedades catalíticas de modo a obter uma boa eficiência do catalisador durante a reação. Óxidos metálicos do grupo V suportados têm uma grande variedade de aplicações catalíticas, e têm sido extensivamente investigados nos últimos anos. Catalisadores à base de óxido de vanádio suportado possuem excelentes propriedades redox e são principalmente empregados como catalisadores em processos de oxidação seletiva. Óxido de tântalo mássico é um sólido ácido com propriedades catalíticas e diversas aplicações têm sido reportadas. O suporte foi preparado pelo método de coprecipitação, utilizando proporções de 15 e 30% p/p de Ta2O5 em Al2O3. A adição de V2O5 sobre o suporte Ta2O5-Al2O3 foi realizada através de impregnação úmida com excesso de solvente, água, formando catalisadores com 2, 4 e 8 átomos de vanádio/nm². A fim de alcançar o objetivo deste trabalho, as seguintes técnicas de caracterização foram utilizadas: volumetria de N2 para determinação da área específica e volume de poros, redução à temperatura programada (RTP), difratometria de raios-X (XRD), espectroscopia na região do infravermelho com transformada de Fourier (FTIR), FTIR com adsorção de piridina e espectroscopia Laser Raman. As propriedades ácidas e/ou básicas dos suportes e catalisadores foram avaliadas através da reação de decomposição do isopropanol. As propriedades texturais do suporte foram modificadas pela adição crescente do vanádio ao suporte, efeito este atribuído ao bloqueio dos microporos pelas espécies de vanádio superficiais. A metodologia empregada na preparação do suporte revelou um material amorfo ao DRX. Nos catalisadores, a adição crescente de vanádio promove a formação de cristais de V2O5 superficiais nas amostras com 4 e 8 átomos de V/nm². Nos resultados de RTP, os catalisadores apresentaram um único pico de redução do vanádio que corresponde à redução de V2O5 a V6O13. Nas análises de FTIR com adsorção de piridina verificou-se a diminuição da força dos sítios ácidos de Lewis, presentes em todos os catalisadores, com a adição de vanádio. Somente nos catalisadores com 8 átomos de V/nm² foram detectadas bandas referentes a sítios ácidos de Br?nsted. Nas análises de espectroscopia Raman não foi observada nenhuma banda característica de espécies VOx isoladas nas amostras, porém para coberturas abaixo de uma monocamada de V foram observadas bandas de espécies poliméricas. Bandas Raman de cristais de V2O5 foram características somente na amostra com 8 átomos de V/nm². A presença de sítios ácidos foi confirmada pela presença de propeno e éter diisopropílico como produtos da desidratação do isopropanol em todos os catalisadores. Com a adição de vanádio, sítios básicos ou redox também foram verificados pela presença de acetona produzida pela desidrogenação do isopropanol. / Metal oxides based catalysts have been very used in petroleum industry, fine chemical and pollution control. The adequate selection of the metal oxide as a support and catalyst, and the use of superficial covering with active compounds lower than a monolayer, where only MOx species are present on the support oxide surface, can be a requirement to modify the catalytic properties in order to have a good catalyst efficiency during the reaction. Supported metal oxides of group V have a large variety of catalytic applications, and have been widely investigated in the last years. Supported vanadium oxide based catalysts have excellent redox properties and they are mainly used as selective oxidation catalyst. Tantalum oxide is an acid solid with catalytic properties and many applications of supported tantalum oxide based catalysts have been reported. The supports were prepared by coprecipitation method, using the proportions of 15 and 30% of Ta2O5 in Al2O3. The addition of V2O5 on the support Ta2O5-Al2O3 was performed using the wet impregnation method with excess of solvent, water, forming catalysts with 2, 4 and 8 atoms of V/nm². In order to achieve the purpose of this work, the following characterization techniques were used: N2 volumetry to determine specific area and pore volume, temperature programmed reduction (TPR), X-ray difratometry, Fourier transform infrared spectroscopy (FTIR) and Laser Raman spectroscopy. The acid/ basic properties of the support and catalysts were evaluated through isopropanol decomposition reaction. The textural properties of the supported were modified by the increasing addition of vanadium, effect attributed to micropores blocked by superficial vanadium species. The used methodology in the support preparation showed an amorphous material to XRD. In the catalysts, the increasing addition of vanadium promotes the formation of V2O5 superficial crystals in the samples with 4 and 8 atoms of V/nm². In the TPR results, the catalysts presented only one reduction peak corresponding to the V2O5 a V6O13 reduction. In the FTIR analysis with adsorbed pyridine, it was observed a decrease of acidity at Lewis acid sites, which were present in all catalysts samples. In the Raman spectroscopy analysis, it was not observed any characteristic band of isolated VOx species in the sample, although covering lower than a monolayer of vanadium, it was observed V=O bands due to surface polymeric vanadium oxide species. V2O5 crystal Raman bands were characteristics only in samples with 8 atoms of V/nm². The presence of acid sites was confirmed by the production of propane and diisopropyl ether as product of isopropanol dehydratation, observed for all catalysts. With V charge, basic and redox sites were verified as well by the production of acetone at isopropanol dehydrogenation.
|
89 |
Etude de l'endommagement laser dans les cristaux non linéaires en régime nanosecondeHildenbrand, Anne 18 November 2008 (has links) (PDF)
L'émergence de lasers de plus en plus puissants et compacts et le développement de leurs applications engendrent des problèmes de tenue au flux des composants optiques et tout particulièrement des cristaux non linéaires. Dans ce contexte, cette thèse s'attache à l'étude de l'endommagement laser en régime nanoseconde dans les cristaux non linéaires utilisés principalement pour la conversion de fréquence (KTP, KDP, LBO) et les applications électro-optiques (RTP, KDP). Les effets spécifiques aux cristaux liés à leur anisotropie et leurs non linéarités ont imposé le développement d'une métrologie de l'endommagement laser adaptée. Cette métrologie a ensuite été appliquée à l'étude détaillée des cristaux isomorphes de KTP et RTP, et du cristal de LBO. L'influence sur leur tenue au flux laser de multiples paramètres, tels que la longueur d'onde d'irradiation, la polarisation, la direction de coupe du cristal, a pu être étudiée permettant de mieux comprendre les mécanismes responsables de l'endommagement laser dans ces cristaux. L'importance de la caractérisation de la tenue au flux laser de ces cristaux sous irradiation multiple et dans leurs conditions fonctionnelles d'utilisation a été mise en évidence. Par exemple, la coexistence de plusieurs longueurs d'onde au sein du matériau modifie de façon importante la tenue au flux laser du composant
|
90 |
In-situ temperature and thickness characterization for silicon wafers undergoing thermal annealingVedantham, Vikram 15 November 2004 (has links)
Nano scale processing of IC chips has become the prime production technique as the microelectronic industry aims towards scaling down product dimensions while increasing accuracy and performance. Accurate control of temperature and a good monitoring mechanism for thickness of the deposition layers during epitaxial growth are critical parameters influencing a good yield. The two-fold objective of this thesis is to establish the feasibility of an alternative to the current pyrometric and ellipsometric techniques to simultaneously measure temperature and thickness during wafer processing. TAP-NDE is a non-contact, non-invasive, laser-based ultrasound technique that is employed in this study to contemporarily profile the thermal and spatial characteristics of the wafer. The Gabor wavelet transform allows the wave dispersion to be unraveled and the group velocity of individual frequency components to be extracted from the experimentally acquired time waveform. The thesis illustrates the formulation of a theoretical model that is used to identify the frequencies sensitive to temperature and thickness changes. The group velocity of the corresponding frequency components is determined and their corresponding changes with respect to temperature for different thickness are analytically modeled. TAP-NDE is then used to perform an experimental analysis on Silicon wafers of different thickness to determine the maximum possible resolution of TAP-NDE towards temperature sensitivity, and to demonstrate the ability to differentiate between wafers of different deposition layer thickness at temperatures up to 600?C. Temperature resolution is demonstrated for ?10?C resolution and for ?5?C resolution; while thickness differentiation is carried out with wafers carrying 4000? and 8000? of aluminum deposition layer. The experimental group velocities of a set of selected frequency components extracted using the Gabor Wavelet time-frequency analysis as compared to their corresponding theoretical group velocities show satisfactory agreement. As a result of this work, it is seen that TAP-NDE is a suitable tool to identify and characterize thickness and temperature changes simultaneously during thermal annealing that can replace the current need for separate characterization of these two important parameters in semiconductor manufacturing.
|
Page generated in 0.0397 seconds