Spelling suggestions: "subject:"chemalloy"" "subject:"diamalloy""
1 |
Surface Treatment for Additive Manufactured Aluminum AlloysGavelius, Marianne, Andersson, Karin January 2020 (has links)
Manufacturing of aircraft parts is often complex and time-consuming, which has led to an increased interest in new manufacturing technologies in the Swedish industry such as additive manufacturing (AM). Additive manufacturing techniques could be a solution to meet the aircrafts’ demand since it contributes to an efficient manufacturing and allows a just-in-time production of complex metal parts in their final shape. However, the use of AM aluminum for aircraft applications is in a development phase and no surface treatment process exists. Thereby, it is of high interest to further investigate surface treatments for AM alloys. Currently at Saab AB, conventional aluminum alloys are generally anodized in tartaric sulphuric acid (TSA) to improve the corrosion resistance and adhesion properties of the metal. On the behalf of Saab AB, there is also an interest in establishing powder coating as a surface treatment. This master thesis’ purpose is to investigate the anodizing and adhesion properties for the two additive manufacturing alloys - AlSi10Mg and ScalmalloyⓇ, and compare it with the conventionally produced Al alloy 2024-T3. The anodization and the powder coating is examined by using following characterization techniques: profilometry, light microscopy, scanning electron microscopy and contact angle measurements. The results from the experimental part indicated successful anodizations for all the alloys and good adhesion properties for powder coating. This research is a first step in contributing to a better understanding of the anodic coating and adhesion properties for the AM samples ScalmalloyⓇ and AlSi10Mg
|
2 |
Zpracování Al-Sc hliníkové slitiny technologií SLM / Processing of Al-Sc aluminum alloy using SLM technologySkulina, Daniel January 2017 (has links)
Master's thesis deals with the experimental determination of process parameters reaching densities >99 % for scandium modified aluminium alloy (Scalmalloy®) processed by SLM. The alloy achieves higher mechanical properties than the AlSi10Mg aluminum alloy commonly used. The theoretical part deals mainly with the results of Scalmalloy® alloys. Experimental bodies, testing methodology and evaluation method were designed on the basis of the theoretical parts,. The practical part is divided into four main stages: experimental determination of process parameters, a description of the effect of the parameters used on the relative density achieved, examination of the influence of process parameters on surface quality and mechanical testing. The mechanical properties were determined for the best parameters.
|
Page generated in 0.0238 seconds