The introduction of this paper describes three thermoeletrical effects and their properties. It also deals with thermoelectrical cells, which are using Seebeck´s and Peltrier´s effects. The paper decribes principles how the Peltier´s cells work, their mathematical model, construction and practical use. The paper shows what kinds, shapes and output we can meet at the market and which kinds of parameters regulate their selection. The paper suggests the possibility to measure characteristic behaviour and quantity during laboratories tasks and their evaluations. At the conclusion is adduced the suggestion of laboratory task together with theoretically made pilot protocol.

The thesis deals with the problem of potential use of solar energy through the conversion into electric energy. The thesis analyses in great detail several types of conversion. My special concern included photovoltaic conversion and thermal conversion of solar energy using steam turbines for energy production. In the subsequent parts, I focus on the problem of photovoltaic, photovoltaic systems, and solar thermal power plants, their installation and use.

This master´s thesis is directed to an research of thermoelectric cells as power sources. It is discoursing about general properities of thermoelectric cells and their using at practical aplications in the first part. Then a heating and cooling system is designed and made for a selected type of thermoelectric cell which represents the emergency back-up power source. In the next part a DC/DC step-up converter is designed for a selected type of thermoelectric cell. This converter generates the DC load voltage 12V. The converter is controlled by PWM with a carrier frequency 50kHz.

In the last decade there is a rising interest in thermoelectric applications. Thermoelectric generators enabling the direct conversion of the heat into the electricity become attractive. This fact is caused by the demands of environmental operation and saving primary resources. Scientists intensively investigate and develop new materials and structures suitable for these applications. The efficiency of the thermoelectric conversion progressively increases. Unfortunately we have no available materials with sufficient thermoelectric properties which could provide cost-competitive price. Thermoelectric generators seem to be useable devices. For example, in case of the unused waste heat using of the thermoelectric generator can increase the overall effectiveness of the unit despite the low efficiency of the generator. This master thesis deals with the issue of the Peltier modules representing the main part of the thermoelectric generators. The physical principles and structures of the thermoelectric modules and the possibility of thermoelectric power production are described here. In the practical part of this thesis the design of the low power generator utilizing waste heat from biomass boiler Verner A 251.1 is proposed.