Dans les systèmes de positionnement de véhicules, à tout moment, n'importe lequel des détecteurs peut, temporairement ou de manière permanente, tomber en panne ou cesser d'envoyer des informations. Il s'ensuit alors des répercussions sur la sécurité, la santé, ainsi que des informations financières ou même légales. Bien que les nouvelles pratiques de conception aient tendance à réduire au minimum les défaillances des détecteurs, il est reconnu que de tels évènements peuvent quand même souvenir. Dans un tel cas, le détecteur défectueux doit être identifié et isolé afin d'éviter de corrompre les évaluations globales et, finalement, le système doit être capable de se reconfigurer afin de surmonter le carence causée par la défaillance. En bref, un système de navigation doit être robuste et adaptatif. Cette thèse propose plusieurs architectures de fusion de données capables de s'adapter suite à des défaillances de détecteurs. Les diverses approches utilisent un filtre Kalman en combinaison avec la détection de défauts pour produire des modules de positionnement robuste. Les modules devront être capables de fonctionner dans des situations telles que l'entrée GPS est corrompue ou non disponible, ou bien qu'un plusieurs détecteurs de position sont défectueux ou bloqués. Le principe de travail vise la modification des gains du filtre Kalman en se basant sur les erreurs normalisées entre les états estimés et les observations. Pour évaluer l'architecture proposée, divers défauts de détecteurs et diverses dégradations de performance ont été mis en oeuvre et simulés. Les expériences démontrent que les solutions proposées peuvent compenser la plupart des erreurs associées aux défauts des détecteurs ou aux dégradations de performance, et que l'exactitude de positionnement qui en découle est améliorée significativement.

This paper describes, the development of a sensor fusion algorithm-based Kalman lter ar- chitecture, in combination with a low cost Inertial Measurement Unit (IMU) for an Attitude Heading Reference System (AHRS). A low cost IMU takes advantage of the use of MEMS technology enabling cheap, compact, low grade sensors. The use of low cost IMUs is primar- ily targeted towards Unmanned Aerial Vehicle (UAV) applications due to the requirements for small package size, light weight, and low energy consumption. The high dynamics nature of smaller airframes, coupled with the typical vibration induced noise of UAVs require an e cient, reliable, and robust AHRS for vehicle control. To eliminate the singularities at 90 on the pitch and roll axes, and to keep the computational e ciency high, quaternions are used for state attitude representation.

Several configurations of Unmanned Aerial Vehicles (UAVs) were proposed to support different applications. One of them is the tailsitter, a fixed-wing aircraft that takes off and lands on its own tail, with the high endurance advantage from fixed-wing aircraft and, as helicopters and multicopters, not requiring a runway during takeoff and landing. However, a tailsitter has a complex operation with multiple flight stages, each one with its own particularities and requirements, which emphasises the necessity of a reliable autopilot for its use as a UAV. The literature already introduces tailsitter UAVs with complex mechanisms or with multiple counter-rotating propellers, but not one with only one propeller and without auxiliary structures to assist in the takeoff and landing. This thesis presents a tailsitter UAV, named AVALON (Autonomous VerticAL takeOff and laNding), and its autopilot, composed of 3 main units: Sensor Unit, Navigation Unit and Control Unit. In order to choose the most appropriate techniques for the autopilot, different solutions are evaluated. For Sensor Unit, Extended Kalman Filter and Unscented Kalman Filter estimate spatial information from multiple sensors data. Lookahead, Pure Pursuit and Line-of-Sight, Nonlinear Guidance Law and Vector Field path-following algorithms are extended to incorporate altitude information for Navigation Unit. In addition, a structure based on classical methods with decoupled Proportional-Integral-Derivative controllers is compared to a new control structure based on dynamic inversion. Together, all these techniques show the efficacy of AVALONs autopilot. Therefore, AVALON results in a small electric tailsitter UAV with a simple design, with only one propeller and without auxiliary structures to assist in the takeoff and landing, capable of executing all flight stages. / Diversas configurações de Veículos Aéreos Não Tripulados (VANTs) foram propostas para serem utilizadas em diferentes aplicações. Uma delas é o tailsitter, uma aeronave de asa fixa capaz de decolar e pousar sobre a própria cauda. Esse tipo de aeronave apresenta a vantagem de aeronaves de asa fixa de voar sobre grandes áreas com pouco tempo e bateria e, como helicópteros e multicópteros, não necessita de pista para decolar e pousar. Porém, um tailsitter possui uma operação complexa, com múltiplos estágios de voo, cada um com suas peculiaridades e requisitos, o que enfatiza a necessidade de um piloto automático confiável para seu uso como um VANT. A literatura já introduz VANTs tailsitters com mecanismos complexos ou múltiplos motores contra-rotativos, mas não com apenas um motor e sem estruturas para auxiliar no pouso e na decolagem. Essa tese apresenta um VANT tailsitter, chamado AVALON (Autonomous VerticAL takeOff and laNding), e seu piloto automático, composto por 3 unidades principais: Unidade Sensorial, Unidade de Navegação e Unidade de Controle. Diferentes soluções são avaliadas para a escolha das técnicas mais apropriadas para o piloto automático. Para a Unidade Sensorial, Extended Kalman Filter e Unscented Kalman Filter estimam a informação espacial de múltiplos dados de diversos sensores. Os algoritmos de seguimento de trajetória Lookahead, Pure Pursuit and Line-of-Sight, Nonlinear Guidance Law e Vector Field são estendidos para considerar a informação da altitude para a Unidade de Navegação. Além do mais, uma estrutura baseada em métodos clássicos com controladores Proporcional- Integral-Derivativo desacoplados é comparada a uma nova estrutura de controle baseada em dinâmica inversa. Juntas, todas essas técnicas demonstram a eficácia do piloto automático do AVALON. Portanto, AVALON resulta em um VANT tailsitter pequeno e elétrico, com um design simples, apenas um motor e sem estruturas para auxiliar o pouso e a decolagem, capaz de executar todos os estágios de voo.

La fusion entre un ensemble de capteurs et de bases de données dont les erreurs sont indépendantes est aujourd’hui la solution la plus fiable et donc la plus répandue de l’état de l’art au problème de la localisation. Les véhicules semi-autonomes et autonomes actuels, ainsi que les applications de réalité augmentée visant les contextes industriels exploitent des graphes de capteurs et de bases de données de tailles considérables, dont la conception, la calibration et la synchronisation n’est, en plus d’être onéreuse, pas triviale. Il est donc important afin de pouvoir démocratiser ces technologies, d’explorer la possibilité de l’exploitation de capteurs et bases de données bas-coûts et aisément accessibles. Cependant, ces sources d’information sont naturellement plus incertaines, et plusieurs obstacles subsistent à leur utilisation efficace en pratique. De plus, les succès récents mais fulgurants des réseaux profonds dans des tâches variées laissent penser que ces méthodes peuvent représenter une alternative peu coûteuse et efficace à certains modules des systèmes de SLAM actuels. Dans cette thèse, nous nous penchons sur la localisation à grande échelle d’un véhicule dans un repère géoréférencé à partir d’un système bas-coût. Celui-ci repose sur la fusion entre le flux vidéo d’une caméra monoculaire, des modèles 3d non-texturés mais géoréférencés de bâtiments,des modèles d’élévation de terrain et des données en provenance soit d’un GPS bas-coût soit de l’odométrie du véhicule. Nos travaux sont consacrés à la résolution de deux problèmes. Le premier survient lors de la fusion par terme barrière entre le VSLAM et l’information de positionnement fournie par un GPS bas-coût. Cette méthode de fusion est à notre connaissance la plus robuste face aux incertitudes du GPS, mais est plus exigeante en matière de ressources que la fusion via des fonctions de coût linéaires. Nous proposons une optimisation algorithmique de cette méthode reposant sur la définition d’un terme barrière particulier. Le deuxième problème est le problème d’associations entre les primitives représentant la géométrie de la scène(e.g. points 3d) et les modèles 3d des bâtiments. Les travaux précédents se basent sur des critères géométriques simples et sont donc très sensibles aux occultations en milieu urbain. Nous exploitons des réseaux convolutionnels profonds afin d’identifier et d’associer les éléments de la carte correspondants aux façades des bâtiments aux modèles 3d. Bien que nos contributions soient en grande partie indépendantes du système de SLAM sous-jacent, nos expériences sont basées sur l’ajustement de faisceaux contraint basé images-clefs. Les solutions que nous proposons sont évaluées sur des séquences de synthèse ainsi que sur des séquence urbaines réelles sur des distances de plusieurs kilomètres. Ces expériences démontrent des gains importants en performance pour la fusion VSLAM/GPS, et une amélioration considérable de la robustesse aux occultations dans la définition des contraintes. / The fusion between sensors and databases whose errors are independant is the most re-liable and therefore most widespread solution to the localization problem. Current autonomousand semi-autonomous vehicles, as well as augmented reality applications targeting industrialcontexts exploit large sensor and database graphs that are difficult and expensive to synchro-nize and calibrate. Thus, the democratization of these technologies requires the exploration ofthe possiblity of exploiting low-cost and easily accessible sensors and databases. These infor-mation sources are naturally tainted by higher uncertainty levels, and many obstacles to theireffective and efficient practical usage persist. Moreover, the recent but dazzling successes ofdeep neural networks in various tasks seem to indicate that they could be a viable and low-costalternative to some components of current SLAM systems.In this thesis, we focused on large-scale localization of a vehicle in a georeferenced co-ordinate frame from a low-cost system, which is based on the fusion between a monocularvideo stream, 3d non-textured but georeferenced building models, terrain elevation models anddata either from a low-cost GPS or from vehicle odometry. Our work targets the resolutionof two problems. The first one is related to the fusion via barrier term optimization of VS-LAM and positioning measurements provided by a low-cost GPS. This method is, to the bestof our knowledge, the most robust against GPS uncertainties, but it is more demanding in termsof computational resources. We propose an algorithmic optimization of that approach basedon the definition of a novel barrier term. The second problem is the data association problembetween the primitives that represent the geometry of the scene (e.g. 3d points) and the 3d buil-ding models. Previous works in that area use simple geometric criteria and are therefore verysensitive to occlusions in urban environments. We exploit deep convolutional neural networksin order to identify and associate elements from the map that correspond to 3d building mo-del façades. Although our contributions are for the most part independant from the underlyingSLAM system, we based our experiments on constrained key-frame based bundle adjustment.The solutions that we propose are evaluated on synthetic sequences as well as on real urbandatasets. These experiments show important performance gains for VSLAM/GPS fusion, andconsiderable improvements in the robustness of building constraints to occlusions.

This thesis presents several new techniques for developing safe and flexible human-robot interaction tasks where human operators cooperate with robotic manipulators. The contributions of this thesis are divided in two fields: the development of safety strategies which modify the normal behavior of the robotic manipulator when the human operator is near the robot and the development of dexterous manipulation tasks for in-hand manipulation of objects with a multi-fingered robotic hand installed at the end-effector of a robotic manipulator. / Valencian Government by the research project "Infraestructura 05/053". Spanish Ministry of Education and Science by the pre-doctoral grant AP2005-1458 and the research projects DPI2005-06222 and DPI2008-02647, which constitute the research framework of this thesis.

This thesis develops an alternative sensor fusion approach for object orientation using low-cost MEMS inertial sensors. The alternative approach focuses on the unique challenges of small UAVs. Such challenges include the vibrational induced noise onto the accelerometer and bias offset errors of the rate gyroscope. To overcome these challenges, a sensor fusion algorithm combines the measured data from the accelerometer and rate gyroscope to achieve a single output free from vibrational noise and bias offset errors. One of the most prevalent sensor fusion algorithms used for orientation estimation is the Extended Kalman filter (EKF). The EKF filter performs the fusion process by first creating the process model using the nonlinear equations of motion and then establishing a measurement model. With the process and measurement models established, the filter operates by propagating the mean and covariance of the states through time. The success of EKF relies on the ability to establish a representative process and measurement model of the system. In most applications, the EKF measurement model utilizes the accelerometer and GPS-derived accelerations to determine an estimate of the orientation. However, if the GPS-derived accelerations are not available then the measurement model becomes less reliable when subjected to harsh vibrational environments. This situation led to the alternative approach, which focuses on the correlation between the rate gyroscope and accelerometer-derived angle. The correlation between the two sensors then determines how much the algorithm will use one sensor over the other. The result is a measurement that does not suffer from the vibrational noise or from bias offset errors.

<p>Sensor fusion has long been recognized as a mean to improve target tracking. Sensor fusion deals with the merging of several signals into one to get a better and more reliable result. To get an improved and more reliable result you have to trust the incoming data to be correct and not contain unknown systematic errors. This thesis tries to find and estimate the size of the systematic errors that appear when we have a multi platform environment and data is shared among the units. To be more precise, the error estimated within the scope of this thesis appears when platforms cannot determine their positions correctly and share target tracking data with their own corrupted position as a basis for determining the target's position. The algorithms developed in this thesis use the Kalman filter theory, including the extended Kalman filter and the information filter, to estimate the platform location bias error. Three algorithms are developed with satisfying result. Depending on time constraints and computational demands either one of the algorithms could be preferred.</p>

<p>The purpose of this report is to evaluate different methods for identifying states in robot models. Both linear and non-linear filters exist among these methods and are compared to each other. Advantages, disadvantages and problems that can occur during tuning and running are presented. Additional measurements from accelerometers are added and their use with above mentioned methods for state estimation is evaluated. The evaluation of methods in this report is mainly based on simulations in Matlab, even though some experiments have been performed on laboratory equipment. </p><p>The conclusion indicates that simple non-linear models with few states can be more accurately estimated with a Kalman filter than with an extended Kalman filter, as long as only linear measurements are used. When non-linear measurements are used an extended Kalman filteris more accurate than a Kalman filter. Non-linear measurements are introduced through accelerometers with non-linear measurement equations. Using accelerometers generally leads to better state estimation when the measure equations have a simple relation to the model.</p>

<p>Genom att fusionera (sammanföra) data från olika sensorer kan ett resultat uppnås som ger mer än de enskilda sensorerna var för sig. Här utreds vilka sensorer och sensorfusionsmetoder som kan vara aktuella att använda för Scanias adaptiva farthållare (ACC). Den adaptiva farthållaren anpassar det egna fordonets hastighet inte bara till en förinställd hastighet utan även till framförvarande fordons hastighet. Scanias ACC-system använder idag en radar för måldetektering.</p><p>Det finns ett antal algoritmer och arkitekturer som passar för sensorfusionssystem beroende på nivån hos sensordatan och användningsområdet. Minstakvadratmetoder kan användas då data ska matchas mot en fysisk modell, ofta med lågnivådata. När tillgänglig data är på den nivån att den används direkt för att fatta beslut kan sannolikhetsmetoder användas. Intelligent fusion består av kognitiva modeller som avser härma den mänskliga beslutsprocessen. Till detta passar data på hög nivå.</p><p>Två lösningar, för två olika sensoruppsättningar, har tagits fram. Båda lösningarna är uppbyggda av bayesiska nätverk. Det första nätverket fusionerar data från den befintliga radarenheten med data från en kamera som detekterar vägmarkeringar. Resultaten visar att filbyten kan upptäckas tidigare i och med fusionen. Det andra nätverket använder sig av två radarenheter, den ursprungliga samt en likadan enhet till, vilket resulterar i ett bredare synfält. Nätverket avgör vilka mål hos respektive radar som kan anses vara samma matchade mål. Informationen kan användas för att öka redundansen i systemet samt för att upptäcka mål tidigare än förut.</p> / <p>By fusing data from different sensors a result can be achieved that is worth more than the data from each sensor by itself. Which sensors and sensor fusion methods that could be used in Scania's adaptive cruise control system (ACC) is investigated. The ACC system adapts the vehicle's speed not only to a driver decided set speed but also to the speed of preceding vehicles. Scania's ACC system uses a radar for target detection.</p><p>There exists a number of algorithms and architectures fit for use in sensor fusion systems. Which one to use depends on the level of the data to be fused and on the field of application. Least square methods are used when matching data to a physical model, data to be used is often at a low level. When working with data at decision level, probability methods are favored. Another example is intelligent fusion, cognitive methods intending to mimic the human decision process. Suitable data is data at a high level.</p><p>Two solutions, for two different sensor sets, are proposed. Both solutions are made out of Bayesian networks. The first one fuses data from the existing radar unit with data from a camera which detects lane markings. The results show that lane changes can be detected earlier thanks to the fusion. The second network uses two radar sensors of the same kind as the first, resulting in a wider field of view. The network decides which ones of each radars targets that are the same matching targets. This information could be used to increase the redundancy of the system and to detect targets earlier.</p>

No description available.