1 |
Thin-Ply Laminate Viscoelasticity and Dimensional Stability in Deployable Space StructuresYapa Hamillage, Milinda Madhusanka Yapa 01 January 2023 (has links) (PDF)
Thin-ply composite materials display remarkable versatility and hold great promise for applications in the space industry. They are characterized by exceptional attributes such as a high strength-to-weight ratio, fatigue resistance, and the ability to conform to high curvatures without failure. This study investigates the behavior of thin-ply composite materials and structures, with a particular emphasis on their relevance to deployable space applications. Deployable structures such as solar sails, are large structures that are designed to be compactly folded into small volumes to fit inside the spacecraft for the purpose of carrying them to space. These structures utilize the strain energy during folding, to facilitate the deployment sequence and attain the intended original configuration of the structure. However, the viscoelastic nature of the composite material leads to a reduction of strain energy over the storage period, leading to shape inaccuracies after deployment. Our research includes an in-depth analysis of the viscoelastic properties of the composite material and the behavior of structures following folding and subsequent deployment. The viscoelastic mechanical properties of the materials were assessed through a numerical multi-scale homogenization approach. We examined thin-ply laminates with varying orientations and ply arrangements and conducted experimental studies to validate the numerical models. We subsequently incorporated the viscoelastic properties of the laminates into the simulation of deployable structures. The laminate properties were evaluated both at the ply level and at the laminate level. Numerical simulations were conducted to study the behavior of a composite boom during folding, stowage, deployment, and subsequent shape recovery. Our research extended to characterizing the composite material based on available test data, as well as examining the stowage and recovery behavior of a structure constructed from unidirectional composites.
|
2 |
Investigation of microstructure and mechanical properties of 3D printed NylonEngkvist, Gustav January 2017 (has links)
This thesis presents a multiscale investigation and characterization of additive manufactured Polyamide material using fused deposition modelling technique. Manufacturing was performed using Markforgeds – Mark one 3D printer. A multiscale investigation dedicated to minimizing the effect of shape distortion during 3D printing are presented, focusing on both molecular alignment in microstructure and implementing internal structures in mesostructure. Characterization on samples investigating microstructure was performed with coefficient of linear thermal expansion measurement and 3-point bending experiment. Different samples with varying infill patterns are tested and results indicates an isotropic behaviour through the manufactured samples and implies no molecular alignment due to printing pattern. In meso-structure, an implemented internal pattern is investigated. All samples are measured with 3D scanning equipment to localize and measure the magnitude of shape distortion. Attempts to find relationships in shape distortion and porosity between the samples resulted in no observed trends. Compressive experiments where performed on samples in axial- and transverse directions resulting in anisotropic behaviour. The largest compressive stiffness is recorded in axial direction reaching 0,33 GPa. The study is done in collaboration with Swerea SICOMP and Luleå University of Technology.
|
Page generated in 0.1416 seconds