1 |
A Study of Impulse Response System IdentificationPaluri, Suraj, Patluri, Sandeep January 2007 (has links)
In system identification, different methods are often classified as parametric or non-parametric methods. For parametric methods, a parametric model of a system is considered and the model parameters are estimated. For non-parametric methods, no parametric model is used and the result of the identification is given as a curve or a function. One of the non-parametric methods is the impulse response analysis. This approach is dynamic simulation. This thesis introduces a new paradigm for dynamic simulation, called impulse-based simulation. This approach is based on choosing a Dirac function as input, and as a result, the output will be equal to the impulse response. However, a Dirac function cannot be realized in practice, and an approximation has to be used. As a consequence, the output will deviate from the impulse response. Once the impulse response is estimated, a parametric model can be fitted to the estimation. This thesis aims to determine the parameters in a parametric model from an estimated impulse response. The process of investigating the models is a critical aspect of the project. Correlation analysis is used to obtain the weighting function from the estimates of covariance functions. Later, a relation formed between the parameters and the estimates (obtained by correlation analysis) in the form of a linear system of equations. Furthermore, simulations are carried out using Monte Carlo for investigating the properties of the two step approach, which involves in correlation analysis to find h-parameters and least squares and total least squares methods to solve for the parameters of the model. In order to evaluate the complete capability of the approach to the noise variation a study of signal to noise ratio and mean, mean square error and variances of the estimated parameters is carried out. The results of the Monte Carlo study indicate that two-step approach can give rather accurate parameter estimates. In addition, the least squares and total least squares methods give similar results.
|
2 |
FM, PM and NPR CalculationsGallupe, Gary 10 1900 (has links)
International Telemetering Conference Proceedings / October 25-28, 1993 / Riviera Hotel and Convention Center, Las Vegas, Nevada / System performance can be ascertained via a number of parameters; one of which is
Signal-to-Noise ratio (SNR). SNR is the ratio of the value of the signal to the value of
the noise. It is generally expressed in decibels and usually a function of the system
bandwidth. Another measure of performance is the Noise-Power ratio (NPR). NPR is
the ratio of the noise level within a specific measurement channel when noise is
applied to all channels, to the level that is measured within the specific channel with
noise applied to all of the channels but not the specific channel.
|
3 |
Dual energy mammography : X-ray spectra optimization using lanthanide and non filters / Μαστογραφία διπλής ενέργειας : Ανάπτυξη αλγορίθμου για την επιλογή κατάλληλου φάσματος από λυχνία ακτίνων-Χ με χρήση συμβατικών φίλτρων και φίλτρων σπανίων γαιώνΚούκου, Βάια 11 October 2013 (has links)
Breast cancer screening and diagnosis in X-ray mammography rely on the detection and visualization of microcalcifications (μCs) and soft tissue masses. The early detection of breast cancer has been shown to decrease breast cancer mortality. The μCs are composed mainly of calcium with attenuation coefficients greater than that of soft tissue. The detection and visualization of μCs are relatively easy over a uniform tissue background, but limited by the ‘‘clutter’’ due to overlapping tissue background present on the mammogram. The clutter in tissue background arises from the structures of glandular tissue, vessels, and soft tissue masses in the breast. However, depending upon their size and location, the visualization of calcifications in mammograms may be limited by the superimposed anatomical structures even when the calcifications have adequate contrast-to-noise ratio (CNR).
Dual-energy subtraction imaging techniques offer an alternative approach to the detection and visualization of μCs. With this technique, high- and low-energy images are separately acquired and ‘‘subtracted’’ from each other in a weighted fashion to cancel out the cluttered tissue structure so as to decrease the obscurity from overlapping tissue structures.
In this study, computer simulations were developed in order to compute SNR as a function of various imaging parameters (X-ray spectra, μC size, breast thickness, and total exposure- 2 different cases) in Dual Energy Calcification images. Emphasis was placed on the monochromatization of the X-ray spectra with the use of K-edge filtering technique. Also, simulations provided values for various quality parameters of the spectra. Optimization was based on maximization of SNRtc while reducing total entrance exposure of the breast or Coefficient of Variation of the incident photons (CVIinc). / Ο καρκίνος του μαστού, ο οποίος είναι μια κοινή αιτία θανάτου μεταξύ των γυναικών
του πληθυσμού, μπορεί να εκδηλωθεί μέσω μικροαποτιτανώσεων. Στη μαστογραφία,
η ιατρική διάγνωση (συμπεριλαμβανομένων των τεχνικών ελέγχου) βασίζεται στην
ανίχνευση και απεικόνιση αυτών των μικροαποτιτανώσεων (μCs) ή/ και της μάζας
των μαλακών ιστών. Η έγκαιρη ανίχνευση του καρκίνου έχει αποδειχθεί ότι μειώνει
τη θνησιμότητα λόγω καρκίνου του μαστού. Οι μCs αποτελούνται κυρίως από
ασβέστιο (Ca), με αποτέλεσμα τη μεγαλύτερη εξασθένηση της ακτινοβολίας σε
σχέση με τον μαλακό ιστό. Η ανίχνευση και η απεικόνιση των μικροαποτιτανώσεων
είναι σχετικά εύκολη για έναν ομοιόμορφο μαστό. Ωστόσο, η απεικόνιση
περιορίζεται από την ανομοιομορφία του υγιούς επικείμενου ιστού, που προκύπτει
από τον αδενώδη ιστό, τις φλέβες και τους μαλακούς ιστούς στο μαστό. Ανάλογα με
το βαθμό της ανομοιομορφίας, την αντίθεση των μCs, και τον τρόπο της επικάλυψης
του ιστού, μπορεί να είναι δύσκολο να εντοπιστεί μια μικροαποτιτάνωση, παρόλο που
ενδέχεται να υπάρχει επαρκής λόγος αντίθεσης προς θόρυβο (CNR).
Η απεικόνιση με αφαιρετική τεχνική διπλής ενέργειας προσφέρει μια
εναλλακτική προσέγγιση για την ανίχνευση και απεικόνιση των μCs. Με την τεχνική
αυτή, αποκτώνται ξεχωριστά εικόνες υψηλής και χαμηλής ενέργειας και στη συνέχεια
αφαιρείται η μια από την άλλη, με σκοπό να μειωθεί η ασάφεια από τις
επικαλυπτόμενες δομές του ιστού.
Στη παρούσα μελέτη, αναπτύχθηκε αλγόριθμος προσομοίωσης για τον υπολογισμό του SNR για διάφορους παράγοντες απεικόνισης (φάσματα ακτίνων-Χ, μέγεθος αποτιτάνωσης, πάχος μαστού και συνθήκες έκθεσης). Έμφαση δόθηκε στη τροποποίηση των φασμάτων ακτίνων-Χ ώστε να αποκτηθούν όσο το δυνατόν πιο «μονοχρωματικά» φάσματα με τη χρήση της τεχνικής K-edge. Η επιλογή των βέλτιστων φασμάτων υψηλής και χαμηλής ενέργειας βασίστηκε στην αύξηση του SNRtc με ταυτόχρονη μείωση της έκθεσης εισόδου στην επιφάνεια του μαστού ή τη μείωση του συντελεστή διακύμανσης των προσπιπτόντων φωτονίων στην είσοδο του μαστού (CVIinc).
|
4 |
A Study of Impulse Response System IdentificationPaluri, Suraj, Patluri, Sandeep January 2007 (has links)
<p>In system identification, different methods are often classified as parametric or non-parametric methods. For parametric methods, a parametric model of a system is considered and the model parameters are estimated. For non-parametric methods, no parametric model is used and the result of the identification is given as a curve or a function.</p><p>One of the non-parametric methods is the impulse response analysis. This approach is dynamic simulation. This thesis introduces a new paradigm for dynamic simulation, called impulse-based simulation. This approach is based on choosing a Dirac function as input, and as a result, the output will be equal to the impulse response. However, a Dirac function cannot be realized in practice, and an approximation has to be used. As a consequence, the output will deviate from the impulse response. Once the impulse response is estimated, a parametric model can be fitted to the estimation.</p><p>This thesis aims to determine the parameters in a parametric model from an estimated impulse response. The process of investigating the models is a critical aspect of the project. Correlation analysis is used to obtain the weighting function from the estimates of covariance functions.</p><p>Later, a relation formed between the parameters and the estimates (obtained by correlation analysis) in the form of a linear system of equations. Furthermore, simulations are carried out using Monte Carlo for investigating the properties of the two step approach, which involves in correlation analysis to find h-parameters and least squares and total least squares methods to solve for the parameters of the model. In order to evaluate the complete capability of the approach to the noise variation a study of signal to noise ratio and mean, mean square error and variances of the estimated parameters is carried out.</p><p>The results of the Monte Carlo study indicate that two-step approach can give rather accurate parameter estimates. In addition, the least squares and total least squares methods give similar results.</p>
|
5 |
Microfluidically Cryo-Cooled Planar Coils for Magnetic Resonance ImagingKoo, Chiwan 16 December 2013 (has links)
High signal-to-noise ratio (SNR) is typically required for higher resolution and faster speed in magnetic resonance imaging (MRI). Planar microcoils as receiver probes in MRI systems offer the potential to be configured into array elements for fast imaging as well as to enable the imaging of extremely small objects. Microcoils, however, are thermal noise dominant and suffer limited SNR. Cryo-cooling for the microcoils can reduce the thermal noise, however conventional cryostats are not optimum for the microcoils because they typically use a thick vacuum gap to keep samples to be imaged to near room temperature during cryo-cooling. This vacuum gap is typically larger than the most sensitive region of the microcoils that defines the imaging depth, which is approximately the same as the diameters of the microcoils.
Here microfluidic technology is utilized to locally cryo-cool the microcoils and minimize the thermal isolation gap so that the imaging surface is within the imaging depth of the microcoils. The first system consists of a planar microcoil with microfluidically cryo-cooling channels, a thin N2 gap and an imaging. The microcoil was locally cryo-cooled while maintaining the sample above 8°C. MR images using a 4.7 Tesla MRI system shows an average SNR enhancement of 1.47 fold. Second, the system has been further developed into a cryo-cooled microcoil system with inductive coupling to cryo-cool both the microcoil and the on-chip microfabricated resonating capacitor to further improve the Q improvement. Here inductive coupling was used to eliminate the physical connection between the microcoil and the tuning network so that a single cryocooling microfluidic channel could enclose both the microcoil and the capacitor with minimum loss in cooling capacity. Q improvement was 2.6 fold compared to a conventional microcoil with high-Q varactors and transmission line connection.
Microfluidically tunable capacitors with the 653% tunability and Q of 1.3 fold higher compared to a conventional varactor have been developed and demonstrated as matching/tuning networks as a proof of concept.
These developed microfluidically cryo-cooling system and tunable capacitors for improving SNR will potentially allow MR microcoils to have high-resolution images over small samples.
|
6 |
Computerised Microtomography : Non-invasive imaging and analysis of biological samples, with special reference to monitoring development of osteoporosis in small animalsStenström, Mats January 2001 (has links)
The use of Computerised microtomography (CμT) in biomedical research is well established, with most applications developed at synchrotron facilities. The possibility to non-invasively monitor morphological changes in biological samples, makes it an attractive technique in biomedicine. However, high absorbed doses and long examination times are a disadvantage that limits the possibilities of performing longitudinal examinations. The aim of this work was to optimise CmT using conventional X-ray tubes for applications in non-destructive material testing and for skeleton research in small animals (rat). A calculational model of the imaging system was developed and used to optimise the relation between image quality, expressed as the signal-to-noise ratio (SNR) in detecting a contrasting detail, and imaging time in material testing. The model was modified to optimise the relation between the SNR in detecting a trabecular detail in cancelleous bone and the mean absorbed dose in spongiosa and skin for (rat) tibia and femur. Gastrectomized Sprague-Dawley rats were used to initiate osteoporotic changes. In order to detect differences in between gastrectomized rats and controls, spatial resolutions of 150 mm or better were needed. The minimum absorbed doses in femur spongiosa at SNR = 5 were 1mGy - 700 mGy at spatial resolutions from 100 mm to10 mm. In femur skin, the corresponding minimum absorbed doses were 2 mGy - 2000 mGy. Corresponding values for tibia were 0.3 mGy - 300 mGy for both spongiosa and skin (spatial resolution of 100 mm to10 mm). Taking 0.5 Gy as the tolerance limit for the spongiosa dose, longitudinal studies with six repeated examinations will be possible at a spatial resolution of 25 mm in femur and 17 examinations in tibia.
|
7 |
"C" Band Telemetry an Aircraft PerspectiveJohnson, Bruce 10 1900 (has links)
ITC/USA 2011 Conference Proceedings / The Forty-Seventh Annual International Telemetering Conference and Technical Exhibition / October 24-27, 2011 / Bally's Las Vegas, Las Vegas, Nevada / This paper concentrates on aircraft specific issues and impacts of utilizing a "C" band telemetry system on a new or existing instrumentation system.
|
8 |
Cortical Auditory Evoked Potential (CAEP) and the chirp Auditory Steady State Response (ASSR) in predicting behavioural hearing thresholds in adults with sensorineural hearing lossKritzinger, Mieke January 2019 (has links)
Abstract
Purpose: To compare the frequency specific Cortical Auditory Evoked Potential
(CAEP) and the chirp-evoked 40 Hz Auditory Steady State Response (ASSR) with
equivalent residual noise levels for behavioural threshold prediction in adults with normal hearing and with SNHL.
Method: The study tested 23 adults with normal hearing and 20 adults with SNHL. The participants were aged between 18–65 years. A repeated measures within-
participant descriptive design was used to collect the quantitative data. The participants underwent behavioural pure tone, CAEP and ASSR testing on the same day.
Results: Similar CAEP difference scores across frequencies for the participants with normal hearing (mean=12.32-14.40 dB) and with SNHL (mean=10.00-16.47 dB) were measured. However, for the ASSR difference scores across frequencies slightly smaller difference scores were measured for the participants with SNHL
(mean=10.17-17.30 dB) than for the participants with normal hearing (mean=11.74- 17.14 dB). CAEP thresholds were significantly closer to the behavioural pure tone thresholds at 500 (p=0.028; mean absolute difference 14.40 dB) and 2000 (p=0.016; mean absolute difference 12.56 dB) Hz for participants with normal hearing. In participants with sensorineural hearing loss, CAEP and ASSR thresholds were measured at similar sensation levels and were not statistically different (p>0.05).
Conclusion: For the purpose of threshold estimation, representing the auditory
function to the level of the auditory cortex the CAEP was closer to the behavioural
hearing thresholds than the 40 Hz ASSR at all frequencies except at 4000 Hz, regardless of the hearing sensitivity.
Keywords: Auditory steady state response (ASSR), Cortical auditory evoked potential (CAEP), Auditory evoked potential (AEP), Residual noise, Signal to noise ratio (SNR), objective threshold estimation, awake adults. / Dissertation (MA (Audiology))--University of Pretoria, 2019. / Speech-Language Pathology and Audiology / MA Audiology / Unrestricted
|
9 |
Design and Implementation of System Components for Radio Frequency Based Asset Tracking Devices to Enhance Location Based Services. Study of angle of arrival techniques, effects of mutual coupling, design of an angle of arrival algorithm, design of a novel miniature reconfigurable antenna optimised for wireless communication systemsAsif, Rameez January 2017 (has links)
The angle of arrival estimation of multiple sources plays a vital role in the field of array signal
processing as MIMO systems can be employed at both the transmitter and the receiver end
and the system capacity, reliability and throughput can be significantly increased by using array
signal processing. Almost all applications require accurate direction of arrival (DOA) estimation
to localize the sources of the signals. Another important parameter of localization systems is
the array geometry and sensor design which can be application specific and is used to
estimate the DOA.
In this work, various array geometries and arrival estimation algorithms are studied and then a
new scheme for multiple source estimation is proposed and evaluated based on the
performance of subspace and non-subspace decomposition methods. The proposed scheme
has shown to outperform the conventional Multiple Signal Classification (MUSIC) estimation
and Bartlett estimation techniques. The new scheme has a better performance advantage at
low and high signal to noise ratio values (SNRs).
The research work also studies different array geometries for both single and multiple incident
sources and proposes a geometry which is cost effective and efficient for 3, 4, and 5 antenna
array elements. This research also considers the shape of the ground plane and its effects on
the angle of arrival estimation and in addition it shows how the mutual couplings between the
elements effect the overall estimation and how this error can be minimised by using a decoupling
matrix.
At the end, a novel miniaturised multi element reconfigurable antenna to represent the receiver
base station is designed and tested. The antenna radiation patterns in the azimuth angle are
almost omni-directional with linear polarisation. The antenna geometry is uniplanar printed logspiral
with striplines feeding network and biased components to improve the impedance
bandwidth. The antenna provides the benefit of small size, and re-configurability and is very
well suited for the asset tracking applications.
|
10 |
Imagerie cérébrale et étude de la connectivité fonctionnelle par échographie Doppler ultrarapide chez le petit animal éveillé et en mouvement / Brain imaging and study of the functional connectivity by ultrafast Doppler imaging in awake and moving rodentsTiran, Elodie 19 June 2017 (has links)
Mes travaux de thèse portent sur l’application de l’imagerie fUS (functional ultrasound imaging) à l’imagerie cérébrale préclinique chez le petit animal. Le but était de transformer cette technique d’imagerie cérébrale récente en un véritable outil de quantification de l’état cérébral. Les objectifs principaux ont été de démontrer la faisabilité de l’imagerie fUS chez le petit animal non anesthésié ainsi que de passer du modèle rat au modèle souris - modèle de choix en imagerie préclinique en neurosciences - de surcroît de façon non invasive. J’ai tout d’abord mis au point une nouvelle séquence d’imagerie ultrasonore ultrarapide (Multiplane Wave imaging), permettant d’améliorer le rapport signal-à-bruit des images grâce à l’augmentation virtuelle de l’amplitude du signal émis, sans diminuer la cadence ultrarapide d’acquisition. Dans un deuxième temps j’ai démontré la possibilité d’imager le cerveau de la souris et du jeune rat anesthésiés par échographie Doppler ultrarapide, de manière transcrânienne et complètement non invasive, sans chirurgie ni injection d’agents de contraste. J’ai ensuite mis au point un montage expérimental, une séquence ultrasonore et un protocole expérimental permettant de réaliser de l’imagerie fUS de manière minimalement invasive chez des souris éveillées et libres de leurs mouvements. Enfin, j’ai démontré la possibilité d’utiliser le fUS pour étudier la connectivité fonctionnelle du cerveau au repos (sans stimulus) chez des souris éveillées ou sédatées. L’imagerie fUS et la combinaison « modèle souris » + « minimalement invasif » + « animal éveillé » + « connectivité fonctionnelle » constituent un outil précieux pour la communauté des neuroscientifiques travaillant sur des modèles animaux pathologiques ou de nouvelles molécules pharmacologiques / My work focuses on the application of fUS (functional ultrasound) imaging to preclinical brain imaging in small animals. The goal of my thesis was to turn this recent vascular brain imaging technique into a quantifying tool for cerebral state. The main objectives were to demonstrate the feasibility of fUS imaging in the non-anaesthetized small rodents and to move from rat model imaging to mouse model imaging –most used model for preclinical studies in neuroscience-, while developing the least invasive imaging protocols. First, I have developed a new ultrafast ultrasonic imaging sequence (Multiplane Wave imaging), improving the image signal-to-noise ratio by virtually increasing emitted signal amplitude, without reducing the ultrafast framerate. Then, I have demonstrated the possibility to use ultrafast Doppler ultrasound imaging to image both the mouse brain and the young rat brain, non-invasively and through the intact skull, without surgery or contrast agents injection. Next, I have developed an experimental setup, an ultrasound sequence and an experimental protocol to perform minimally invasive fUS imaging in awake and freely-moving mice. Finally, I have demonstrated the possibility to use fUS imaging to study the functional connectivity of the brain in a resting state in awake or sedated mice, still in a transcranial and minimally invasive way. fUS imaging and the combination of "mouse model" + "minimally invasive" + "awake animal" + "functional connectivity" represent a very promising tool for the neuroscientist community working on pathological animal models or new pharmacological molecules
|
Page generated in 0.0715 seconds