The diploma thesis deals with the proposal of a new guesthouse with a restaurant. The building is located in a slightly sloping terrain in the cadastral area of the village Vlasatice Brno-venkov in the South Moravian Region in the Czech Republic. The ground-plan shape of the building is mostly rectangular with folded facade parts. It is a partially basement building, to a lesser extent, recessed below ground level with three above-ground floors. The pension has a total of 22 rooms with a total capacity of 46 persons for short-term accommodation. Four rooms on the first floor are designed as wheelchair accessible. For the proper operation of the pension there is a reception on the first floor and an office with the appropriate meeting room on the second floor. One-storey part of the building consists of a restaurant with a capacity of 76 persons, which is designed as a frame skeleton with intensive vegetation single-skin flat roof. The preparation and meals and service of the restaurant is ensured by the kitchen together with its operations and respective warehouses located on the first floor. The basement is used primarily for the operation of the guesthouse, which is located air-conditioning engine room, utility room, workshop or warehouse. The building is for the most part bricked and the peripheral, internal bearing or partition walls are made of polished ceramic blocks porotherm. External walls are insulated with contact insulation system ETICS of gray EPS polystyrene. The glazed Schüco façade is used as the shell of the skeleton structure. The construction of the ceiling is composed of filigree ceiling panels and a singlelayer flat roof with a slope of 3% is used for roofing the building. The thesis contains project documentation for the realization of the construction.

This master’s thesis focuses on the preparation of project documentation for construction part of a multifunction building. This buildig has a five floors, the first one is a underground and four of them are above grand. The building is located in part of Prague – Dolní Chabry. Building has a rectangle shape which isin the midle shifted and makes two similar section. Each sectin has own main entry, stairs and lifts. Orientation the longer facades of the multipurpose house are facing to south and north in the longer asis. Garage for resident is located in the lowest floor. In the first floor above ground is commercial part of the house, six commercial spaces. In the rest of the floors are located 26 apartments. Vertical structure are made of the Porother systém and Best systém, celings are meda from prefaricated reinforced concrete panels. Structure of the roof is solid by single skin flat roof.

The aim of the diploma thesis was to draw up a proposal for the project documentation for the realization of the construction of the civic amenities building and that of the sports center. The building is located in Prostějov, cadastral area Prostějov. It is a three-storey building with one underground and two above-ground floors. Across the floors there are spaces for various sports uses, technical background of the building, staff backgrounds and a café. The object is based on the base passages, the vertical structures are formed by blocks of lost formwork and ceramic cavity blocks, the ceiling structures are solved by pre-stressed ceiling panels. The roof is designed as a single-layer, flat with extensive vegetation treatment, the roofing of the roof is finished by means of atics. The project is designed with an emphasis on the layout and constructional design of the building with respect to the parties and the land plan. During the processing I tried to use modern building materials and procedures and to process the building as a functioning unit.

The subject of this diploma thesis is an extension of a two-storey basement sports center in Jeseník nad Odrou. There is a relaxation area and a fitness area in the sports center. It is connected to the existing gym building with the tourist hostel by means of a connecting neck. There is a reception and a café for both facilities. The whole building is then covered with single-layer flat roofs. The main entrance to the building is located on the southeast side of the building at level 1.NP. Vertical constructions are made mainly of ceramic sys-tem elements Porotherm. Ceiling constructions are designed as prefabricated prestressed panels. The staircases are prefabricated reinforced concrete. The project was developed using the computer program AutoCAD.

The subject of the diploma thesis is the design of a new building of a free-standing building for housing for the elderly, in the form of project documentation for the construction. The building is designed brick with monolithic reinforced concrete ceilings. Perimeter masonry is designed from ceramic brick blocks th. 300 mm supplemented by contact insulation system ETICS th. 200 mm, which will be provided with silicone plaster with a grain size of 1.5 mm. The internal load-bearing masonry is designed from acoustic ceramic brick blocks of thickness 250 and 300 mm. The partitions are designed from acoustic partitions. The ceilings are designed with a heavy floating floor with excellent acoustic properties. The roof above the two-storey part is designed as a single-skin flat with extensive greenery. Above the three-storey part is a hipped roof made of lattice trusses and sheet metal roofing. The windows are designed with plastic insulating triple glazing. The balcony railing is designed for aluminum with safety glass filling. The building is heated by a gas boiler and controlled ventilation is designed throughout the building using a central recuperation.

The project deals with a new building for temporary accommodation with a cafe. The building is designed as a detached house, the estate is situated in the southern part of the town of Břeclav and is almost flat. The hostel has an L shaped house plan with a stiffening reinforced concrete tube passing through all three floors. A glazed facade is intended to be placed on the part of the tube that is found before perimeter walls, which creates a dominant feature of the entire building. The roofing of the building is ensured by a single skin flat and glass sloping roof, which completes the whole building architecturally.

The subject of the diploma thesis is the design of the construction of a multifunc-tional building of the municipal building in Předboj and the elaboration of the construction documentation. The proposed building is located near the existing village center. The building is designed on undeveloped land, which forms an im-aginary boundary between the existing buildings from the end of the 19th century and the beginning of the 20th century and the new buildings from the beginning of the 21st century. The architectural character suitably combines the character of the original development with gabled roofs with modern elements characterizing the new development. The building is divided into two wings. The east wing is one-storey and houses the premises of the municipal office. The west wing is mul-ti-storey. In the basement there are the technical facilities of the municipal office, on the first floor there are the library and the ceremonial hall. The attic is intended for the detached workplace of the basic art school.

The subject of my diploma thesis is a design of new kindergarten and elaboration of documentation for the construction. The building is situated in the southwestern suburb of Brno, in the district Brno-Starý Lískovec district. The building is set in a slightly sloping terrain. The building has two floors and and basement, created by partial basement of the building. The building is characterized with two wings designed at right angles and a decent coloured facade. The building contains two kindergarten classrooms with a capacity of 48 children with operational facilities, a rentable part for public, the administrative of the school and a technical facilities of the building. The first floor contains two separate kindergarten classes, each with 24 children, teacher's cabinet, toy storage room and a kitchen. The kitchen is designed without food preparation, with a food delivery company. Each kindergarten class has its own entrance. On the second floor is a rentable space containing a classroom, workshop, lounge and terrace. There are also an isolation room, a gym for children and a head master's office. The building is designed to a low energy standard, definated by near zero heat energy building (nzeb) standarts. There is established a wheelchair access to the building, A lift is proposed in the building. The structural design is proposed as a ceramic block wall with contact insulation system. The vertical strucutres are made of reinforced concrete cast-in-place ceiling. The building is based on concrete foundation and is covered by a single-skin, flat roof with a layer of extensive flora.

The subject of the diploma thesis is the design of a free-standing veterinary clinic building in Nová Paka, in the form of project documentation for the construction. The building of the veterinary clinic consists of 3 rectangles forming a Z-shape, where the entrance to the building of the veterinary clinic, its operational and administrative part is located in the eastern part. In the western rectangle there is a separate and operationally separate entrance to the apartment unit, which is located on the second floor. The entrance to the veterinary clinic building and the housing unit is barrier-free. The building will be located in a slightly sloping terrain (3.49%). The main facade of the building with the entrance to the building is oriented to the southwest. The separate entrance to the apartment unit is from the northeast side. The perimeter masonry consists of the Porotherm system with the ETICS contact thermal insulation system in a thickness of 300 mm and 200 mm ETICS masonry. The internal load-bearing masonry also consists of a Porotoherm masonry system in a thickness of 250 mm. Internal non-load-bearing masonry consisting of the Porotherm system in thicknesses of 115 and 140 mm. The ceiling structure consists of a reinforced concrete slab th. 200 mm. Above the veterinary clinic, the roof area forming the terrace of the housing unit is considered, divided into two parts 1) with a vegetation layer and 2) with a tread layer of concrete paving on the targets. The main waterproofing layer of the flat roof consists of strips of SBS modified asphalt. Above the 2nd floor, a sloping hip roof made of glued wooden trusses is considered, and a sheet metal roofing is considered as the roof covering of the truss roof. The windows are designed with insulating triple glazing. The attic on the flat roof is equipped with an aluminum railing with a vertical bar infill. The building is heated by a gas condensing boiler, the building is also designed forced ventilation