The preparation of polymeric hybrid composite consisting of organic and inorganic fillers is of interest for industries like automotive, construction and packaging. In order to understand and predict the physical and chemical properties of these hybrid composites, it is necessary to fully understand the nature and properties of the employed fillers. In this study, the preparation of polypropylene hybrid composite consisting of wheat straw and clay was investigated. A detailed study was performed on wheat straw from South Western Ontario region. The effect of grinding the straw and compounding it with polypropylene was investigated. Experiments were carried out to identify the thermal stability of the ground wheat straw with respect to their size and composition. It was important to identify a correlation between these properties in order to minimize the straw degradation by processing and also to improve the final properties of the hybrid composite. The composite samples were prepared through melt blending method using a co-rotating twin-screw extruder. Sample test bars were prepared by injection moulding. The composition of the constituents of the hybrid composite; percentages of wheat straw, clay and coupling agent, were varied in order to investigate their influence on thermal stability, water resistance and mechanical properties. The results of the study indicated that grinding the wheat straw with a hammer mill produced particles with different sizes and shapes. It was found that through the grinding system all particles, regardless of their size, had a multi-layered structure similar to the plant structure. Further hammer milling did not produce plant particles with long aspect ratios that would be expected in a defibrillation process. Analysis of the chemical composition of wheat straw particles of different sizes and shapes was used to measure the ratio of hemicelluloses: lignin and the ash content. It was found that the large particles contained more amount of lignin whereas smaller particles had larger amount of ash content. The thermal stability of the particles was found to be a function of particle size rather than the lignin content. Particle size analysis on the wheat straw particles after the extrusion process indicated a reduction in the particle length and aspect ratio. The thermal stability of the composites was found to be enhanced by the addition of clay particles at higher temperature and the addition of coupling agent at lower temperatures. Increasing the amount of wheat straw and clay content increased the flexural modulus and reduced the resistance for water absorption. Increasing the amount of coupling agent also increased the flexural modulus and resistance for water absorption. The morphological study by scanning electron microscopy revealed that coupling agent increased the interfacial interaction between the particles and the polymer matrix.

Au cours de ces dernières décennies, des études ont étés menées pour identifier plusieurs traceurs des matériaux du cycle du combustible nucléaire, dans le cadre de la lutte contre la prolifération nucléaire. Ces matériaux sont généralement collectés lors d’inspections dans des installations nucléaires, ou saisis lors de contrôles de trafics illicites. Les informations fournies par ces traceurs sont parcellaires et ne permettent pas de déterminer avec exactitude la provenance et l’historique industriel de ces matériaux.Le but de ce travail de thèse est de démontrer le potentiel de l’utilisation des isotopes du molybdène pour le traçage des matériaux du cycle du combustible nucléaire. Le choix s’est porté sur le molybdène car en raison de la similarité de leurs propriétés chimiques, le molybdène et l’uranium sont étroitement associés dans les minerais d’uranium et tout au long de la chaîne de purification de l’uranium. L’étude s’est focalisée sur une partie de l’amont du cycle du combustible, depuis l’extraction des minerais d’uranium jusqu’à la production des concentrés miniers d’uranium : divers procédés physiques et chimiques sont appliqués, à la fois pour purifier l’uranium et abaisser la concentration en molybdène.Au cours de cette étude, une nouvelle méthode de séparation du molybdène a été développée pour caractériser sa composition isotopique dans des minerais, minéraux et concentrés miniers d’uranium. La variabilité des compositions isotopiques du molybdène dans un gisement d’uranium est principalement due aux mécanismes d’adsorption et/ou de précipitation du molybdène. Les gisements magmatiques et sédimentaires ont des compositions isotopiques différentes, ce qui permet ainsi leurs distinctions. Les concentrés miniers d’uranium produits à partir de ces deux types de gisements ont des compositions isotopiques similaires aux minerais. Ces résultats soulignent ainsi le potentiel des isotopes du molybdène comme traceur des origines des concentrés miniers d’uranium. Cependant, un fractionnement des isotopes du molybdène a été établi lors de la production des concentrés miniers d’uranium pour deux usines au Niger. Les procédés de purification de l’uranium tels que la lixiviation, l’extraction par solvant et la précipitation ont été reproduits en laboratoire sur des échantillons réels pour expliquer le fractionnement isotopique du molybdène lors de la production des concentrés miniers. Au cours de ces procédés, le fractionnement peut être positif (lixiviation), négatif (extraction par solvant, précipitation à l’eau oxygénée) ou nul (précipitation à l’ammoniaque). Dans le cas des échantillons du Niger, la somme de ces procédés est négative, dans le sens des données expérimentales que nous avons obtenues, démontrant ainsi également le potentiel de l’utilisation des isotopes du molybdène comme traceur des procédés de transformations des matériaux du cycle du combustible nucléaire. / Nuclear forensics aims at determining the age, provenance as well as industrial or storage history of uranium ores and uranium ore concentrates that are part of the nuclear fuel cycle. Several potential tracers have already been identified for this purpose. However, these tracers are not providing always unambiguous information. This study is focused on establishing Mo isotopes as a new tracer of uranium ore provenance and of ore processing for its application in nuclear forensics. Molybdenum and uranium share a number of common geochemical properties. In the nuclear fuel cycle, molybdenum is an impurity that is difficult to separate during uranium extraction and purification processes, while its concentration is required to be lower than some specification limits. We focused this study on the first part of the nuclear fuel cycle, from the uranium ores extraction to the production of uranium ore concentrates.We developed an enhanced separation method for Mo from a uranium-rich matrix (uranium ores, uranium minerals, uranium ore concentrates) in order to analyze the mass fractionation induced by processes typical of the nuclear fuel cycle. Molybdenum isotopic compositions in uranium ores depend of adsorption and precipitation processes. The δ98Mo values of sedimentary uranium ores is shifted to negative values relative to magmatic ores. This provides a means of distinguishing these types of uranium ores. Uranium ores concentrates produced from both uranium ore natures (magmatic and sedimentary) have Mo isotope compositions similar to the uranium ores. These results suggest that molybdenum isotopes have a strong potential of as a tracer for identifying the origin of the uranium ore concentrates. However, Mo isotopes fractionations were established during the production of uranium ore concentrates in the both Niger mills. We reproduced in laboratory the lixiviation, solvent extraction and precipitation processes to explain these observations. The Mo isotopes fractionation is positive for the lixiviation process, negative for the solvent extraction and precipitation with hydrogen peroxide, and null for ammonia precipitation. In the case of the Niger samples, the sum of these processes is negative and agrees with our experimental data. Mo isotopes have a strong potential as a tracer for identifying the origin and transformation of uranium in the nuclear fuel cycle, in the framework of nuclear forensics.

Made available in DSpace on 2014-10-09T12:54:09Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:09:15Z (GMT). No. of bitstreams: 1 12442.pdf: 17943869 bytes, checksum: d8ae26da3e514d980c366a9cafa81e22 (MD5) / Dissertacao (Mestrado) / IEA/D / Instituto de Quimica, Universidade de Sao Paulo - IQ/USP

Made available in DSpace on 2014-10-09T12:54:09Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:09:15Z (GMT). No. of bitstreams: 1 12442.pdf: 17943869 bytes, checksum: d8ae26da3e514d980c366a9cafa81e22 (MD5) / Dissertacao (Mestrado) / IEA/D / Instituto de Quimica, Universidade de Sao Paulo - IQ/USP

Les graines de neem et de dattier du désert ont été caractérisées et leurs perspectives de fractionnement orientées. Un procédé de fractionnement des graines de neem en extrudeur bi-vis a été étudié en vue d’une production et d’une valorisation intégrée de ses fractions: huile, coextrait d’azadirachtine, protéines et lipides, et raffinat d’extrusion. La mise en oeuvre de l’eau et des mélanges hydroéthanoliques (jusqu’à 75% d’éthanol) comme solvants d’extraction avec une configuration de l’extrudeur bi-vis définissant quatre zones (une zone d’alimentation, une zone de broyage, une zone d’extraction solide-liquide et une zone de séparation solide/liquide), permet d’extraire au filtrat 83 à 86% de l’azadirachtine, 86 à 92% des lipides et 44 à 74% des protéines de la graine et de produire un raffinat essentiellement fibreux, contenant au plus 8% de lipides, 12% de protéines et 0,82 g/kg d’azadirachtine. Une des meilleures voies de traitement de la suspension que constitue le filtrat brut est la séparation solide-liquide par centrifugation. Ce procédé de séparation permet d’obtenir une émulsion diluée contenant 42 à 64% des lipides et jusqu’à 41% des protéines de la graine. La décantation centrifuge permet de le réaliser efficacement, mais elle peut présenter des inconvénients pour le traitement de grands volumes. Considérée comme sous-produit du traitement du filtrat brut, la phase insoluble peut contenir 24 à 48% des lipides, 32,9 à 47% des protéines et 10 à 13% de l’azadirachtine de la graine. L’eau s’est avérée être le meilleur solvant de ce procédé de fractionnement. Le pressage des graines de neem suivi de l’extraction aqueuse ou hydroalcoolique dans le même extrudeur bi-vis permettent d’exprimer jusqu’à 32% de l’huile de la graine et de récupérer 20% de l’huile de la graine sous forme claire, avec très peu d’azadirachtine, en assurant de meilleurs rendements en azadirachtine et en protéines au filtrat brut. Deux voies de traitement des filtrats ont été étudiées : celle conduisant à une émulsion d’azadirachtine et celle conduisant à l’obtention d’une poudre lyophilisée d’azadirachtine. La valorisation du raffinat d’extrusion, fibreux, a été orientée vers la production d’agromatériaux par thermopressage. Un schéma de bioraffinage de la graine de neem pour la valorisation de ses constituants a été ainsi mis en place. / Neem and desert date seeds were characterized and their fractionation perspectives oriented. A process of fractionation of neem seeds in twin-screw extruder has been studied for the purpose of production and integrated valorization of its fractions: oil, co-extract of azadirachtin, proteins and lipids, and extrusion raffinate. The use of water and water/ethanol mixtures (up to 75% ethanol) with a twin-screw extruder configuration defining four zones (a feed zone, a grinding zone, a solidliquid extraction zone and a solid / liquid separation zone), allows to extract from the filtrate 83 to 86% of the azadirachtin, 86 to 92% of the lipids and 44 to 74% of the proteins of the seed thereby producing a raffinate essentially fibrous containing at most 8% lipids, 12% proteins and 0.82 g/kg azadirachtin. One of the best ways of processing the suspension that is the crude filtrate, is a solid-liquid separation by centrifugation. This separation process makes it possible to obtain a diluted emulsion containing 42 to 64% of the lipids and up to 41% of the proteins of the seed. A centrifugation achieves it effectively, but this separation process can have disadvantages in the treatment of large volumes. Considered as a by-product of the treatment of crude filtrate, the insoluble phase can contain 42 to 64% of the lipids, 32.9 to 47% of the proteins and 10 to 13% of the azadirachtin of the seed. Water has proven to be the best solvent in this fractionation process. The pressing of the neem seeds followed by the aqueous or hydroalcoholic extraction in the same twin-screw extruder makes it possible to extract up to 32% of the oil of the seeds and to recover 20% of the seed oil in clear form, with very little azadirachtin, ensuring better extraction yields of azadirachtin and proteins to the crude filtrate. Two treatment pathways of the filtrates were studied: one leading to an emulsion of azadirachtin and another to a freeze-dried powder of azadirachtin. The valorization of the fibrous extrusion raffinate has been oriented towards the production of agromaterials by thermopressing. A biorefinery scheme of the neem seed for the valorization of its constituents has thus be implemented.

Ce travail de doctorat traite l’optimisation des méthodes d’extraction des composés phénoliques à partir des sous-produits de la viticulture et de la viniculture, à savoir les sarments de vigne et les marcs de raisins. Plusieurs technologies innovantes sont appliquées et comparées : l’extraction accélérée par solvant (EAS), les décharges électriques de haute-tension (DEHT), les ultrasons (US) et les champs électriques pulsés (CEP). Les extractions solide-liquide faites sur les sarments ont montré que, parmi les solvants étudiés, l’eau est le moins efficace. L’ajout de la β-cyclodextrine dans l’eau améliore le procédé d’extraction mais est moins efficace que les mélanges hydroéthanoliques. L’extraction en milieu alcalin donne le meilleur rendement en composés phénoliques. L’intensification de l’extraction des composés phénoliques des sarments est possible grâce aux nouvelles technologies d’extraction. L’efficacité des méthodes testées est la moindre avec les US, moyenne avec les CEP pour atteindre le meilleur rendement phénolique avec les DEHT. La filtrabilité de ces extraits est d’autant plus lente que leur composition est complexe. L’ultrafiltration membranaire permet une très bonne purification et concentration des composés phénoliques. L’étude des mécanismes d’action des DEHT a permis d’identifier les phénomènes favorisant l’extraction des composés phénoliques à partir des sarments. Un effet mécanique des DEHT, capable de fragmenter les sarments, est en majorité responsable de cette amélioration. Le procédé énergivore du broyage pourra alors être omis. Un effet électrique contribuant également à l’intensification du procédé d’extraction est démontré. La formation de peroxyde d’hydrogène durant le traitement par DEHT est quantifiée mais ne semble pas altérer les composés phénoliques qui sont des molécules à capacité antiradicalaire élevée. Quant aux études portées sur les marcs de raisins, la variation simultanée de plusieurs paramètres opératoires a permis l’optimisation de l’extraction aqueuse et hydroéthanolique des composés phénoliques en ayant recours à la méthodologie de surface de réponse (MSR). Le passage d’un milieu aqueux à un milieu hydroéthanolique a permis d’améliorer nettement le procédé d’extraction solide-liquide des composés phénoliques et l’utilisation de l’EAS a permis l’augmentation du rendement en composés phénoliques jusqu’à trois fois par rapport à l’optimum obtenu en milieu hydroéthanolique. / This study deals with the optimization of the extraction methods of phenolic compounds from viticulture and viniculture by-products, namely vine shoots and grape pomace. Several innovative technologies were tested and compared: high voltage electrical discharges (HVED), accelerated solvent extraction (ASE), ultrasounds (US) and pulsed electric fields (PEF). The solid-liquid extraction conducted on vine shoots showed that, amongst the studied solvents, water is the least effective. The addition of the β-cyclodextrin to water improves the extraction process but remains less effective than that with hydroethanolic mixtures. The extraction in alkaline medium gives the highest phenolic compound extraction yields. The intensification of phenolic compound extraction from vine shoots was possible thanks to new extraction technologies. The effectiveness of the tested methods was the least with US, followed by PEF to accomplish the highest phenolic yield with HVED. The filterability of the extracts was slower when their composition was complex, and the membrane technology allowed a good purification and concentration of phenolic compounds. The reason behind the high effectiveness of HVED was investigated. The action mechanisms of HVED were studied in details. A mechanical effect of HVED provoked vine shoots fragmentation and particle size reduction. This was the main phenomenon responsible for the intensification of the extraction process. It also suggested that a grinding pretreatment would not be necessary prior to HVED, which considerably diminishes the energy input of the overall process. The presence of a non-mechanical effect and its contribution in the efficiency of HVED were also shown. The formation of hydrogen peroxide during the treatment was observed. However it did not seem to alter vine shoot phenolic compounds since these demonstrated a high radical scavenging capacity. As for the studies conducted on grape pomace, the simultaneous variation of several operating parameters allowed the aqueous and hydroethanolic optimization of phenolic compound extraction from these byproducts by response surface methodology (RSM). The passage from an aqueous to a hydroethanolic medium clearly improved the solid-liquid extraction of phenolic compounds from grape pomace. The use of ASE further increased the phenolic compound yield up to three times as compared to the optimum obtained with a hydroethanolic solvent.

La thérapie photodynamique (PDT) est une technique utilisée cliniquement pour traiter certaines maladies de la peau, la dégénérescence maculaire liée à l’âge et certains types de cancer. Elle fait intervenir trois composants : une molécule photosensible ou photosensibilisateur (PS), la lumière et l’oxygène. Après administration du PS, celui-ci va se localiser plus ou moins sélectivement dans les zones tumorales où il est alors activé par irradiation lumineuse à une longueur d’onde et une puissance données. Ceci engendre la formation d’espèces réactives de l’oxygène (ROS) très réactives, dont l'oxygène singulet1 O2, qui entraînent la destruction des tissus tumoraux par nécrose ou apoptose. Afin d’améliorer la sélectivité du traitement, différentes pistes sont actuellement exploitées dont l’élaboration de « photodynamic molecular beacons » (PMB). Dans un PMB, le photosensibilisateur (PS) est associé via un peptide à un inhibiteur 1O2, appelé quencher. Ce quencher inhibe la formation d’1O2 tant que le composé n’a pas atteint sa cible. Une fois la zone cancéreuse atteinte, des enzymes spécifiques clivent le peptide, libérant ainsi le PS qui retrouve alors sa capacité à former de l’1O2. Trouver un couple PS/quencher adéquat reste un challenge en PDT. Les propriétés photophysiques particulières des caroténoïdes et leur aptitude à inhiber la production d’1O2 font de ces derniers des quenchers potentiellement utilisables pour l’élaboration de PMBs. Chez les plantes, les caroténoïdes (carotènes et xanthophylles) sont des pigments associés à la photosynthèse, qui ont deux rôles principaux : un rôle de collecteur de lumière et un rôle photoprotecteur en protégeant le(s) système(s) photosynthétique(s) contre les dommages photooxydatifs liés à une exposition trop intense à la lumière. Ceci s’opère, entre autre, via le cycle des xanthophylles. Cette aptitude à capter de l’énergie présente un intérêt potentiel à ne pas négliger dans la perspective de la conception de PMB utilisables en thérapie photodynamique. Dans le cadre de cette thèse en co-tutelle avec la Faculté des Sciences de Bizerte nous avons ciblé les caroténoïdes présents dans trois fruits produits en Tunisie à savoir les kakis (Diospyros kaki L.), les abricots (Prunus armeniaca L.) et les pêches (Prunus persica L.) connus pour leur richesse globale en ces pigments. Divers procédés d’extractions ont été étudiés : (i) L’extraction de type Soxhlet par solvants organiques à pression atmosphérique, utilisée comme référence, (ii) l'extraction accélérée par solvant organique (ASE : Accelerated solvent Extraction) effectuée sous pression, enfin (iii) l'extraction par CO2 supercritique avec l’éthanol comme cosolvant. Pour ces deux derniers procédés, une approche par plan d’expériences (surfaces de réponses) a été utilisée pour identifier les facteurs clé et les conditions optimales d’extractions de divers caroténoïdes (pression, température, débit, % de cosolvant, temps, nombre de cycles). L'analyse par chromatographie liquide à haute performance couplée à la détection UV-Visible et à la spectrométrie de masse a ensuite permis l'identification et la quantification des caroténoïdes présents dans les extraits obtenus, permettant ainsi de comparer les profils caroténoïdiques propres à chaque fruit et les performances de chaque procédé d’extraction. Cette étude ayant révélé un profil caroténoïdique particulièrement intéressant chez le kaki par rapport aux autres fruits, une extraction et une purification des caroténoïdes de ce fruit par chromatographie liquide haute pression préparative a ensuite été effectuée afin de disposer d’une quantité suffisante de chaque caroténoïde, et parfois de leurs isomères conformationnels, en vue de l’étude de leurs propriétés photophysiques (absorption, émission de fluorescence, inhibition d’1O2) et de l’évaluation de leur intérêt potentiel en tant que quencher d’1O2 dans un édifice de type PMB / Photodynamic therapy (PDT) is a clinically used technique for treating skin diseases, age-relatedmacular degeneration but mainly some types of cancer. PDT involves three components: a photosensitive molecule named photosensitizer (PS), light and oxygen. After administration of the PS, this one will be located more or less selectively in tumoral regions where it is activated by light irradiation at appropriate wavelength and power. This leads to the formation of highly reactive and cytotoxic reactive oxygen species (ROS), especially singlet oxygen, resulting in the destruction of the tumor by necrosis or apoptosis. To improve the treatment selectivity, different strategies are being exploited, one of which is the development of "photodynamic molecular beacons" (PMB). In PMB the photosensitizer is linked via a peptide to an inhibitor of 1O2 (quencher). This quencher inhibits the formation of 1O2 as long as the compound has not reached its target, namely cancer cells. In order to inhibit the toxicity of the PS in non-target cells and restore toxicity only close to the biological target, it is necessary to find an adequate PS/quencher couple. This remains a challenge for PDT. Carotenoids are interesting candidates due to their specific photophysical properties and ability to inhibit 1O2, which makes them potential quenchers for building PMBs. In plants, carotenoids (carotenes and xanthophylls) are pigments involved in the photosynthesis, in which they play two main roles: a light collecting role and a protecting role by preserving the photosynthetic systems against photoxydative damages induced by a too intense light exposure. This protection can for instance occur via the well-known xanthophylls cycle. This capacity to catch energy presents a potential interest that should not be neglected in the framework of the design of PMBs usable in photodynamic therapy. Within the framework as part of this PhD thesis in Cotutelle with the Faculty of Sciences of Bizerte, we focused on carotenoids from three fruits produced in Tunisia: persimmon (Diospyros kaki L.), apricot (Prunus armeniaca L.) and peache (Prunus persica L.), known for their global richness in these natural pigments. Three extraction processes were investigated: (i) the Soxhlet extraction based on the use of organic solvent at atmospheric pressure and used as reference, (ii) the accelerated solvent extraction (ASE) using organic solvent under high pressure, and (iii) the supercritical fluid extraction (SFE) using supercritical CO2 and ethanol as cosolvent. For these two last processes, a design of experiments (Surface Response Design) was used to identify the key factors and optimal extraction conditions of various carotenoids (pressure, temperature, flow, % cosolvent, time, number of cycles). Then, HPLC-PDA coupled with mass spectrometry (MS) enabled the identification and quantification of carotenoids from the extracts. Thus it was possible to compare the profiles in carotenoids content from each fruit as well as the performances of each extraction process. This study showed that the carotenoidic profile in the persimmon was the most interesting as compared to the profiles in the two other fruits. Extraction and purification of the carotenoids from persimmon by preparative high pressure liquid chromatography were then performed in order to have a sufficient amount of each carotenoid and sometimes of their conformational isomers. We finally performed a study of their photophysical properties (absorption, fluorescence emission, 1O2 inhibition) in order to evaluate their potential as 1O2 quencher in molecular construction such as a PMB

The theoretical part of this diploma thesis consists of current matters regarding the presence of perfluorinated organic compounds in living environment elements. The attention has been focused on perfluoroktanoic acid (PFOA), (PFOS), and (FOSA). Physical-chemical characteristics of these organic pollutants and their toxicological and environmental aspects have been described. Possible ways of the pollutants analytical determination have been specified. The experimental part has explored effects of extraction techniques (sonication, pressurized solvent extraction, solid-phase extraction) used for PFAS separation from seats of fire soil sample. Identification of the analytes have been achieved by liquid chromatography/mass spektrometry.

This work is based on the occurrence of drug residues in the environment. This study is focused on the development and optimization methods for determination of selected drugs in the surface water, aquatic sediment and sewage sludge from waste water treatment plant. From the group of drugs were chosen antibiotics. Antibiotics presented in the environment can cause adverse effects including toxic effects, immunity disorders and indirect bioalteration effects. Sulfonamide antibiotics, which are used in the treatment of urinary and respiratory tract infections as well as in the treatment of other infectious diseases, were chosen as a target compounds. Three optimized analytical methods for determination of sulfonamide antibiotics were developed. For the optimization of extraction were tested: solid phase extraction, pressurized solvent extraction, microwave extraction and ultrasonic extraction. For the final analysis was used liquid chromatography with two detectors - diode array detector and mass spectrometer. These optimized methods were applied for the analysis of real samples. The surface water and sediment samples were collected from two Moravian rivers (the Svratka river and the Svitava river). Samples of sewage sludge were collected from waste water treatment plant Brno-Modřice. Fish samples from the Svratka river were also collected. It was observed that all the selected sulfonamide antibiotics are present in real sediment samples (ug.kg-1). Simultaneously presence of some target analytes in real surface water (ug.l-1) and in sewage sludge (ug.kg-1) samples has been confirmed. In samples of surface water from the Svitava river and in fish samples sulfonamide antibiotics were not detected or their concentrations were below the limit of detection.

In the presented PhD. thesis, problems covering occurrence of polybrominated diphenyl ethers (PBDE) and perfluorinated compounds in the environment were solved. The study was focused on identification and further verification of optimal methods in order to determine PBDEs and perfluorinated compounds sampled from the aquatic ecosystem. Polybrominated diphenyl ethers belong to persistent compounds classified as main pollutants; within the environmental constituents, they have been observed particularly in the last decade. For these studies, there were selected surface water matrices and sediments taken in various localities within the river Svratka basin. The analyses were to demonstrate whether they accumulate and remain in these specific matrices for longer time. There we assessed the congeners of polybrominated diphenyl ethers as follows: BDE-28, 47, 66, 85, 99, 100, 153, 154 and 183. In order to isolate them from matrices, various extraction techniques were used, i.e., ultrasonic extraction, microwave extraction, and pressure solvent extraction. Gas chromatography method with electron capture detection (GC/ECD) was selected for determination. The accomplished studies also assessed basic chemical, physical and environmental characteristics of diphenyl ethers in the environmental constituents. The attention was also paid to perfluorooctanoic compounds (PFOA), (PFOS) and (FOSA); physico-chemical properties of these organic pollutants were characterised and their toxicological and environmental aspects were evaluated. Usability of extraction techniques (ultrasonic extraction, pressure solvent extraction, solid phase extraction) applied to PFCs isolation from sediments samples was assessed. Identification and quantification of these analytes were performed using a high performance liquid chromatography/mass spectrometry method (HPLC/MS). After that, the optimized methods applied to real samples. Surface water and sediments were sampled within the river Svratka basin, in particular, from 19 sampling localities. PBDE occurrence was confirmed in sediments samples from the Svratka river (g.kg-1), PBDE were not detected in the surface water samples, their concentrations were below the detection limit, resp.; perfluorinated compounds were not detected in sediments and water samples at all.