The master thesis dealing with problematic about durability of concrete, with use of recycled concrete and addition of silica additions. Predominant for resistance of concrete constructions is surface layer, through which aggressive gasses and liquids penetrate from surrounding environment. The most important indicator of concrete durability is ability of surface layer transmissions of aggressive substants. In experimental part will be defined the actual state of surface layer by normal testing methods. The transmissions of surface layer will be tested on concrete cubes. Tests for transmissions of air (method TORRENT), of water (method ISAT), of acid gases (dept of carbonation by quick test in 98% CO2) will be carried out and also strength tests. Assessment of positive or negative influence of additions and amount of cement on durability and mechanical properties of concrete will be discussed in conclusion.

The topic of this master's thesis is the development of composite materials based on inorganic binders for use in extreme conditions. It means especially geopolymeric or alkali activated materials (AAM) based composites. The theoretical part of this thesis summarizes knowledges about the development and use of alkali-activated materials, their structure and mechanisms of their formation. It also deals with the applicable raw materials for AAM and their exciters, which are in particular water glass and sodium hydroxide. There also have been a summary of the effects of high temperatures and chemicals on the mechanical properties of AAM and the requirements of standard EN 1504-3 for repairing materials. The task of the practical part was to develop a repair mortar for concrete structures based on AAM so that its production was as simple as possible, ie one-component materials. Gradually six recipes have been develeoped. Test specimens made from these recipes have been putted to selected tests according to the requirements of ČSN EN 1504-3.

Civil engineering development is connected with the application of new construction methods and the development of new building materials. Concrete, as one of the basic building materials, is part of this development. A major turning point in the development of concrete and its properties occurred with the use of new, more efficient plasticizing additives. This allowed to produce concrete with lower water cement ratio, while increasing the strength of concrete. Gradually, the compressive strength of concrete boundary has moved by several levels, when there are currently commonly used concrete with strength of about 100 N/mm2 and with the special methods of concrete production strength range from 250 to 300 N/mm2. A negative aspect of the development of (ultra) high-strength concrete is their energy and economic demands. A characteristic feature of high-strength concrete is a high content of cement and very fine admixtures, especially silica fume. One way to improve the economics of these types of concrete is the application of cheaper admixture based on industrial waste. The content of this work is the observation and description of the properties of high-strength concrete and reactive powder concrete, in which the admixtures were based on industrial waste were applied. Part of this work is the comparison of economic parameters for individual types of concrete.

The theme of this work is to monitor the effect of zinc on the properties of blended Portland cements. Zinc was tested in the form of two-soluble salts: Zn(NO3)22 H2O and ZnCl2 and a very slightly soluble compound ZnO. Blended cements were prepared by partial replacement with finely ground granulated blast furnace slag, high-temperature and fluidized bed combustion filter fly ash. Flow properties were studied on the prepared pastes. Impact on hydration reactions was examined by using of isothermal and isoperibolic calorimetry. Flexural and compressive strength were measured as mechanical properties of the prepared test specimens. The phase composition of the prepared composites and incorporation of zinc ions in the cement matrix via leaching tests and FTIR analyzes were also studied. Microstructure development of cement samples was tested by SEM analysis with EDS. Influence on ecotoxicity was also measured.