Esta pesquisa avaliou a eficiência do biofiltro aerado submerso empregado no pós-tratamento do efluente do reator anaeróbio de manta de lodo (UASB), em escala real, localizado na ETE Água Vermelha em São Carlos, SP, sob condições hidráulicas desfavoráveis. Estudou-se a remoção de matéria orgânica e de sólidos, a possibilidade de remoção de nitrogênio e fósforo e também as características da biomassa aderida ao meio suporte. O estudo foi desenvolvido em duas fases, uma sem a adição de inóculo (fase I) e outra com inoculação (fase II). Na fase I foi aplicada vazão de 380 m³/dia, cargas orgânicas volumétricas (COV) de 3kgDQO/m³.dia com carga hidráulica (CH) de 8 m³/m².dia e tempo de detenção hidráulica (TDH) de 170 minutos. Nesta fase o biofiltro alcançou eficiências médias de 40% na remoção de matéria orgânica (DQO) e de 35% para os SST. Na segunda fase foram aplicadas vazões de 500 m³/dia, COV de 4 kg DQO/ m³.dia com CH de 11 m³/ m².dia e TDH de 130 minutos. O BAS apresentou eficiências médias de remoção de DQO, \'COT IND.F\' e SST de 36%, 60% e 30%, respectivamente, para a fase II. A conversão de nitrito a nitrato foi considerada desprezível, podendo ser atribuída ao alto valor de DQO afluente ao BAS, à ocorrência de nitrificação e desnitrificação no mesmo biofilme e à distribuição ineficiente de ar no interior do reator. O biofiltro não apresentou bons resultados quanto à remoção de fósforo durante a pesquisa. O estudo permitiu concluir que o BAS apresentou um desempenho satisfatório como unidade de pós-tratamento de reator UASB na fase de partida, mesmo sendo submetido a altas cargas hidráulicas e orgânicas. Constatou-se, portanto, que o emprego do biofiltro aerado submerso apresenta-se como uma alternativa vantajosa para o pós-tratamento do efluente de reatores anaeróbios, produzindo um efluente de excelente qualidade. / This research evaluated the efficiency of a full scale submerged aerated biofilter (SAB) used for post-treatment of the effluent of an upflow anaerobic sludge blanket (UASB) reactor, located in the wastewater treatment plant Água Vermelha (São Carlos, SP, Brazil), under unfavorable hydraulic conditions. The removal of organic matter and solids, the possibility of removal of nitrogen and phosphorus and also the characterization of biomass attached to the packing media were studied. This study vas developed in two phases, one without reactor seeding (phase I), and another when the reactor was seeded (phase II). At phase I, a flow rate of 380 m³/d and a volumetric loading rate of 3 kgCOD/m³.d with hydraulic load (HL) of 8 m³/m².d were applied, with 170 minutes of hydraulic retention time (HRT). In this phase the biofilter reached average efficiencies of 40% in organic matter removal (COD) and 35% for TSS. Already in phase II, a flow rate of 500 m³/d, a volumetric loading rate of 4kgCOD/m³.d with HL of 11 m³/ m².dia were applied, with 130 minutes of HRT. The SAB allowed average removal efficiencies of COD, \'TOC IND.F\' and TSS of 36%, 60% and 30%, respectively, for phase II. The conversion of nitrite to nitrate was considered worthless, likely attributed to the high value of affluent COD to the SAB, the occurrence of nitrification and denitrification in the same biofilm and the inefficient air distribution in the interior of the reactor. The biofilter did not present good results in phosphorus removal. This study allowed to conclude that the aerated submerged biological filter presented a satisfactory performance as a post-treatment unit of an UASB reactor during the start-up phase, being submitted to high hydraulic and organic loads. It was found that the employment of the submerged aerated biofilter is an advantageous alternative as anaerobic effluent post-treatment, producing excellent quality effluent.

O processo de lingotamento contínuo de produtos planos de aço tem sido alvo de incessantes estudos devido a sua importância na produção de bobinas laminadas a partir de placas, para um grupo muito diversificado de clientes, dentre os quais, destacam-se as indústrias automobilística e de eletrodomésticos (\"linha branca\"), que têm se mostrado muito exigentes. No entanto, por tratar-se de aços desoxidados ao alumínio, é comum a ocorrência de formação de um depósito de óxido de alumínio (alumina), no interior do tubo submerso do processo de lingotamento contínuo, o que diminui seu diâmetro interno, levando à restrição de passagem do aço líquido pelo seu interior, provocando a perda de produtividade devido à necessidade de se reduzir a velocidade de lingotamento e até mesmo a contaminação do aço com inclusões de alumina, principalmente naqueles seqüenciais com um elevado tempo de lingotamento, próximo de dez horas. Para tanto, desenvolveu-se um tubo com um material interno anti-clogging que na literatura é chamado de C-less, para minimizar e/ou evitar a deposição de alumina e com uma linha de escória reforçada com uma camada de zircônia (ZrO2) mais espessa e mais nobre, para resistir ao ataque da escória. O objetivo desta dissertação foi comparar tubos de diferentes fornecedores, avaliando as principais variáveis que têm influência direta na sua performance: perfil de aquecimento, taxa de erosão na linha de escória, índice de obstrução e parâmetros físico-químicos através da correlação dos materiais antes e após uso (post-mortem). Os resultados encontrados mostraram uma melhor performance dos tubos do fornecedor \"M\", que apresentaram menores taxas de desgaste e, conseqüentemente, maior potencial de vida (maior tempo de lingotamento) após análise da linha de escória, que pode ser atribuída a uma melhor distribuição dos grãos de zircônia na matriz (maior homogeneidade), além de apresentarem grãos mais finos e desta forma, reduzindo os espaços \"vazios\" na matriz, propícios ao ataque da escória por meio de um desequilíbrio químico entre esta escória líquida e o refratário. Além disto, seu material anti-clogging e projeto de distribuição do mesmo na peça, propiciaram um melhor resultado em relação à obstrução pela deposição de alumina ao longo do corpo do tubo submerso. / The continuous casting process of steel plane products has been objective of incessant studies due to its importance in the production of laminated coils starting from slabs, for a very diversified group of customers, among all the automobile industries and of appliances (\"home appliances\"), that have been showing very demanding. However, for being low carbon aluminum killed steels, is common the occurrence of aluminum oxide (alumina) deposit formation, inside of submerged nozzle in continuous casting process, what decreases its internal diameter, taking to the restriction of passage of the liquid steel for its interior, provoking the productivity loss due to the need of being reduced the casting speed and even the contamination of the steel with alumina inclusions, mainly in those sequential with a high casting time, close of ten hours. For so much, a submerged nozzle was developed with a internal anti-clogging material that it is called C-less in the literature, to minimize and/or to avoid the alumina building up and with a slag reinforced line with a zirconium layer (ZrO2) thicker and more noble, slag attack resist to. The dissertation objective was compare submerged nozzles from different suppliers, evaluating the main variables that have direct influence in its performance: heating profile, slag line erosion rate, clogging index and physical-chemical parameters through the materials correlation before and after use (post-mortem). The results showed submerged nozzle\'s better performance from supplier \"M\", that presented smaller waste rates and, consequently, last longer live (larger time of casting) after analysis of the slag line, that can be attributed to a better distribution of the zirconium grains in the head office (larger homogeneity), besides they present finer grains and this way, reducing the empty \" spaces \" in the head office, favorable to slag attack by means of a chemical unbalance between this liquid slag and the refractory. Besides, its anti-clogging material and project distribution in the same piece, they propitiated a better result in relation to the clogging for the alumina building up along the body of the submerged nozzle.

Ces dernières années, de nouvelles stratégies ciblant un accompagnement de la mobilité du trait de côte plutôt que sa fixation ont vu le jour. Parmi celles-ci, les ouvrages atténuateur de houle visent à protéger la côte en dissipant l’énergie des vagues par déferlement bathymétrique, tout en restant invisibles depuis la plage. Leur utilisation a toutefois eu des effets contrastés et les processus hydro-sédimentaires induits par ces structures restent mal connus. L’objectif général de ce travail est de mieux comprendre les effets de ces atténuateurs de houle sur la morphodynamique littorale, notamment sur des sites où l’évolution de l’avant-côte est complexe et dynamique. L’observation des effets induits par un atténuateur de houle installé au lido de Sète (Golfe du Lion), sur la dynamique littorale est réalisée via un dispositif vidéo qui permet de caractériser l’évolution morphologique du système. En s’appuyant sur une méthode automatique de correction des images développée dans le cadre de cette thèse, l’estimation de la bathymétrie par inversion de la célérité des vagues et ses erreurs associées sont évaluées pour la première fois en Méditerranée. Les observations montrent que l’atténuateur de houle impacte de manière importante la morphologie et la dynamique des barres sableuses pré-littorales et révèlent que l’élargissement de la plage résulte principalement de son couplage avec la nouvelle forme de barre plus linéaire. Le modèle morphodynamique 2DBeach est ensuite implémenté sur Sète et sur un second site atelier en Australie où un récif artificiel de taille et de forme différente a été mis en place. Les simulations réalisées permettent de déterminer les circulations induites par ces ouvrages ainsi que les évolutions sédimentaires associées. Enfin, ce travail met en lumière les différents processus physiques contrôlant l’influence d’un atténuateur de houle sur les évolutions morphologiques des barres sableuses pré-littorales et du trait de côte, et renforce des connaissances essentielles à la gestion durable des plages sableuses. / In recent years, traditional coastal defense strategy has become increasingly unpopular as it is costly and lastingly scars the landscape with sometimes limited effectiveness or even adverse impact. Mimicking natural reefs, submerged breakwaters aims to protect the coast, decreasing wave energy through wave breaking offshore with the advantage of remaining invisible from the beach. The general objective of this work is to better understand the different morphodynamic processes that interact in the presence of these structures, especially for complex beach morphology with highly dynamic sandbars. The observation of the effects induced by a submerged breakwater deployed at the Lido of Sète (Gulf of Lions) on the morphological response is performed using a video monitoring system. Based on an automatic method for image correction developed in this thesis, a video-derived depth inversion algorithm was tested to infer nearshore bathymetry from remotely-sensed wave parameters. Our observations show that the submerged breakwater had a profound impact on the shoreline-sandbar system and suggest that, on barred beaches, the role of the sandbar is critical to shoreline response to the implementation of such a structure. The expected salient formation was not observed and, instead, shoreline coupled to the modified sandbar geometry, which resulted in a slight seaward migration of the shoreline in the lee of the structure. In order to characterize the nearshore circulation induced by these structures and to better assess sediment transport, the morphodynamic model 2DBeach was then implemented on Sète and at another beach in Australia where an artificial reef of different size and shape has been deployed. This work allows a better understanding of the influence of a submerged breakwater on the morphological evolution of sandbars and shoreline on time scales from storm to years, and provides new insight into nearshore system response to better design sustainable management of sandy beaches.

This thesis focused on investigating flow, coherent structures, and mechanisms leading to scour around a series of three submerged groynes in a high curvature (radius of curvature (R)/channel width (B)=1.5) channel bend using a Large Eddy Simulation Numerical (LES) model. Flow was investigated during both an initial and a later stage of scour. The results showed that the groynes appeared effective in keeping the main core of high streamwise velocity away from the outer bank wall in the region where they were installed, although high potential still existed for local scour around the groynes. During the initial stage of scour, horseshoe vortices (HVs) showed the greatest propensity to induce scour immediately upstream of the groyne tips. During the later stage of scour, the HV in front of the first upstream groyne (G1) induced very high mean pressure fluctuations on the outer bank wall. Scour was also of very great concern around the tip of G1 due to severe mean bed pressure fluctuations. Downstream of the groyne field, the presence of a counter-rotating outer bank cell was capable of endangering the stability of the outer bank. The second focus of this thesis was to investigate flow in a 135° channel bend using both Reynolds Averaged Navier Stokes (RANS) and LES numerical models. The RANS study examined the effects of curvature ratio (R/B), and aspect ratio (B/H, where H is the inlet flow depth), on secondary circulation strength, and bed shear stresses. The study revealed that a decrease in R/B was associated with an increase in secondary circulation strength and peak bed shear stress. A change in B/H also substantially affected cross stream circulation strength. The LES study was conducted in a 135° (R/B = 1.5) bend flume with a fixed bed corresponding to near equilibrium scour conditions, and the results were compared to a similar high curvature 193° bend numerical study. Inner bank vortices and shear layers were present in both cases although their characteristics were substantially different. Distributions of boundary friction velocities, and turbulence were also quite different for each case.

Extreme rainfall events associated with global warming are likely to produce an increasing number of flooding scenarios. A large magnitude of hydrologic events can often result in submerged orifice flow (also called pressure flow) or embankment and bridge overtopping flow, in which the foundation of a bridge is subjected to severe scour at the sediment bed. This phenomenon can cause bridge failure during large floods. However, current laboratory studies have focused on only cases of free-surface flow conditions, and they do not take bridge submergence into account. In this study, abutment scour experiments were carried out in a compound channel to investigate the characteristics of abutment scour in free-surface flow, submerged orifice flow, and overtopping flow cases. Detailed bed contours and three components of velocities and turbulent intensities were measured by acoustic Doppler velocimeters. The results show that the contracted flow around an abutment because of lateral and/or vertical contraction and local turbulent structures at the downstream region of the bridge are the main features of the flow responsible for the maximum scour depth around an abutment. The effects of local turbulent structures on abutment scour are discussed in terms of turbulent kinetic energy (TKE) profiles measured in a wide range of flow contraction ratios. The experimental results showed that maximum abutment scour can be predicted by a suggested single relationship even in different flow types (i.e., free, submerged orifice, and overtopping flow) if the turbulent kinetic energy and discharge under the bridge can be accurately measured.

This thesis aims to develop control algorithms for irrigation canals in an experimental framework.These water transport systems are difficult to manage and present low efficiencies in practice. As a result, an important percentage of water is lost, maintenance costs increase and water users follow a rigid irrigation schedule.All these problems can be reduced by automating the operation of irrigation canals.In order to fulfil the objectives, a laboratory canal, called Canal PAC-UPC, was equipped and instrumented in parallel with the development of this thesis. In general, the methods and solutions proposed herein were extensively tested in this canal.In a broader context, three main contributions in different irrigation canal control areas are presented.Focusing on gate-discharge measurements, many submerged-discharge calculation methods are tested and compared using Canal PAC-UPC measurement data. It has been found that most of them present errors around ±10%, but there are notable exceptions. Specifically, using classical formulas with a constant 0.611 contraction value give very good results (error<±6%), but when data is available, a very simple calibration formula recently proposed in the literature significantly outperform the rest (error<±3%). As a consequence, the latter is encouragingly proposed as the basis of any gate discharge controller.With respect to irrigation canal modeling, a detailed procedure to obtain data-driven linear irrigation canal models is successfully developed. These models do not use physical parameters of the system, but are constructed from measurement data. In this case, these models are thought to be used in irrigation canal control issues like controller tuning, internal controller model in predictive controllers or simply as fast and simple simulation platforms. Much effort is employed in obtaining an adequate model structure from the linearized Saint-Venant equations, yielding to a mathematical procedure that verifies the existence of an integrator pole in any type of canal working under any hydraulic condition. Time-domain and frequency-domain results demonstrate the accuracy of the resulting models approximating a canal working around a particular operation condition both in simulation and experiment.Regarding to irrigation canal control, two research lines are exploited. First, a new water level control scheme is proposed as an alternative between decentralized and centralized control. It is called Semi-decentralized scheme and aims to resemble the centralized control performance while maintaining an almost decentralized structure. Second, different water level control schemes based on PI control and Predictive control are studied and compared. The simulation and laboratory results show that the response and performance of this new strategy against offtake discharge changes, are almost identical to the ones of the centralized control, outperforming the other tested schemes based on PI control and on Predictive control. In addition, it is verified that schemes based on Predictive control with good controller models can counteract offtake discharge variations with less level deviations and in almost half the time than PI-based schemes.In addition to these three main contributions, many other smaller developments, minor results and practical recommendations for irrigation canal automation are presented throughout this thesis.

No description available.

No description available.

Coastal defense structures are built in order to protect valuable coastal regions from the destructive effects of the waves. Due to the cost of coastal defense structures and the economical potential of the coastal regions, failure of such structures could cause loss of high amounts of investment. Therefore in the design and construction of coastal structures, it is of vital importance to achieve an optimum design which is not neither underdesigned nor overdesigned. In this study, Submerged Berm type coastal defense structures with several different cross-sections were tested for stability under storm conditions. Damage analyses of the different models were carried out to compare the structure characteristics under storm conditions and to obtain the most economical and stable cross-section. For the model studies, 5 different models were constructed by using Van der Meer&rsquo / s approach and berm design guidelines. Models were constructed with a model scale of 1:31.08 in the wave flume in the Coastal and Harbor Engineering Laboratory, Civil Engineering Department, METU. The newly designed and optimized berm type structure was proved to be successful and economical.

For the manufacture of higher strength pipelines to be feasible, a better understanding of the effects of welding on toughness is necessary. Bevel submerged arc welds were performed on X80 grade steel. The subsequent Charpy V-notch (CVN) test results indicated that the notch placement in the various heat affected zone regions, and hence the bead geometry, affected the test results. A series of bead-on-plate (BOP) submerged arc welds then were performed on X70 grade steel plate to determine the effects of current, voltage, heat input, polarity, and waveform manipulation (i.e., balance, offset, and frequency) on both single and tandem weld bead geometry. A new bead profile characteristic, the SP ratio, is proposed to describe weld bead geometry, and its relationship with welding parameters is discussed. Sub-size CVN specimens, pulled from many of the BOP weld coupons, were then tested. The greatest subsize CVN fracture energies were achieved when the bead was produced using lower heat input, and when the bead profile possessed a greater SP ratio. / Materials Engineering