1 |
Bi-Annual Report 2007/08 - Rossendorf Beamline at ESRF (ROBL-CRG)Scheinost, A. 09 September 2010 (has links) (PDF)
The Rossendorf Beamline (ROBL) - located at BM20 of the European Synchrotron Radiation Facility (ESRF) in Grenoble, France - is in operation since 1998. This 6th report covers the period from January 2007 to December 2008. In these two years, 50 peerreviewed papers have been published based on experiments done at the beamline. The average citation index, which increased constantly over the years, has now reached 3.5 (RCH) and 3.0 (MRH), indicating that papers are predominately published in journals with high impact factors. Six exemplary highlight reports on the following pages should demonstrate the scientific strength and diversity of the experiments performed on the two end-stations of the beamline, dedicated to Radiochemistry (RCH) and Materials Research (MRH).
Demand for beamtime remains very high as in the previous years, with an average oversubscription rate of 1.8 for ESRF experiments. The attractiveness of our beamline is based upon the high specialization of its two end-stations. RCH is one of only two stations in Europe dedicated to x-ray absorption spectroscopy of actinides and other radionuclides. The INE beamline at ANKA provides superior experimental flexibility and extends to lower energies, including important elements like P and S. In contrast, ROBL-RCH provides a much higher photon flux, hence lower detection limits crucial for environmental samples, and a higher energy range extending to elements like Sb and I. Therefore, both beamlines are highly complementary, covering different aspects of radiochemistry research. Once the MARS beamline at SOLEIL is ready to run radionuclides (>2010), it will cover a third niche (Materials Science of actinides, including irradiated fuel) not accessible for the two other beamlines.
The Materials Research Hutch MRH has realized an increasing number of in-situ investigations in the last years. On the one hand thin film systems were characterized during magnetron sputtering. On the other hand diffraction experiments under controlled atmosphere were performed. A high variety of experimental parameters was covered by varying pressure, temperature and atmospheric compositions including highly reactive gases. Furthermore structural investigations were combined with electrical conductivity measurements. These kind of in-situ experiments are the key to monitor and understand reaction mechanism or the influence of process parameters, which are again the basis to tailor materials properties on demand. The core competences of MRH are these experimental possibilities, which make it unique among other diffraction beamlines. In fall 2007, ROBL was reviewed by an international panel on behalf of the ESRF. The very positive panel report recommended a renewal of the contract between ESRF and FZD for the next five years, and a major upgrade of critical optical components of the beamline to keep ROBL competitive for the next decade. The FZD will provide 2 Mio € from 2009 to 2011 for this upgrade, which will be performed in parallel to the major upgrade of the ESRF to minimize the downtime. According to the current plans of the ESRF, our users have to expect that ROBL will have only limited or no operation for several months from August 2011 on.
Since July 2004 the beamline is a member of the pooled facilities of ACTINET – European Network of Excellence. In the reported period, RCH has provided 27 % of its inhouse beamtime to perform 11 ACTINET experiments. The success of ACTINET within FP-6 has now led to a renewal of ACTINET within FP-7, running until end of 2011.
|
2 |
Novel X-ray imaging detectorsDuxbury, Dominic Mark January 1997 (has links)
No description available.
|
3 |
Radiation from a charged particle executing helical motion in a magnetic-ionic medium /King, Harry Stephen January 1971 (has links)
No description available.
|
4 |
Synchrotron and relativistic cyclotron radiations in anisotropic medium /Ramchandani, Raj January 1975 (has links)
No description available.
|
5 |
Outflows from compact objects in supernovae and novaeVlasov, Andrey Dmitrievich January 2017 (has links)
Originally thought of as a constant and unchanging place, the Universe is full of dramas of stars emerging, dying, eating each other, colliding, etc. One of the first transient phenomena noticed were called novae (the name means "new" in Latin). Years later, supernovae were discovered. Despite their names, both novae and supernovae are events in relatively old stars, with supernovae marking the point of stellar death. Known for thousands of years, supernovae and novae remain among the most studied events in our Universe. Supernovae strongly influence the circumstellar medium, enriching it with heavy elements and shocking it, facilitating star formation. Cosmic rays are believed to be accelerated in shocks from supernovae, with small contribution possibly coming from novae. Even though the basic physics of novae is understood, many questions remain unanswered. These include the geometry of the ejecta, why some novae are luminous radio or gamma-ray sources and others are not, what is the ultimate fate of recurrent novae, etc.
Supernova explosions are the primary sources of elements heavier than hydrogen and helium. The elements up to nuclear masses A around 100 can form through successive nuclear fusion in the cores of stars starting with hydrogen. Beyond iron, the fusion becomes endothermic instead of exothermic. In addition, for these nuclear masses the temperatures required to overcome the Coulomb barriers are so high that the nuclei are dissociated into alpha particles and free nucleons. Hence all elements heavier than A around 100 should have formed by some other means. These heavier nuclear species are formed by neutron capture on seed nuclei close to or heavier than iron-group nuclei. Depending on the ratio between neutron-capture timescale and beta-decay timescale, neutron-capture processes are called rapid or slow (r- and s-processes, respectively). The s-process, which occurs near the valley of stable isotopes, terminates at Bi (Z=83), because after Bi there is a gap of four elements with no stable isotopes (Po, At, Rn, Ac) until we come to stable Th. The significant abundance of Th and U in our Universe therefore implies the presence of a robust source of r-process. The astrophysical site of r-process is still under debate. Here we present a study of a candidate site for r-process, neutrino-heated winds from newly-formed strongly magnetized, rapidly rotating neutron stars ("proto-magnetars"). Even though we find such winds are incapable of synthesizing the heaviest r-process elements like U and Th, they produce substantial amounts of weak r-process (38<Z<47) elements. This may lead to a unique imprint of rotation and magnetic fields compared to such yields from otherwise analogous slowly rotating non-magnetized proto-neutron stars.
Novae explosions are not as powerful as those of supernovae, but they occur much more frequently. The standard model of novae assumes a one-stage ejection of mass from the white dwarf following thermonuclear runaway. The discovery by the Fermi space telescope of gamma-rays from classical novae made the existence of shocks in novae outflows evident. The presence of shocks in novae was considered well before the discovery of gamma-ray emission; however, little previous theoretical work acknowledged the overwhelming effect of shocks on observed emission and ejecta geometry. Here we present the calculations of synchrotron radio emission from the shocks as they propagate down the density gradient and peak at the timescale of a few months. The model satisfactory fits observations and has several implications for the physics of novae.
|
6 |
In-situ 3D imaging of structure and failure of materials using synchrotron radiation tomography2013 March 1900 (has links)
X-ray micro-tomography has become an increasingly important technique for
characterizing the 3D microstructure of materials. This became possible mainly because spatial
resolution of the imaging detectors has improved, and synchrotron radiation is more accessible
for micro-tomography imaging.
In the presented project a novel experimental system has been designed and built at
Biomedical Imaging and Therapy (BMIT)’s 05B1-1 beamline at Canadian Light Source (CLS).
This system allows imaging structural transformation during in-situ loading experiments under
tensile stress. The system was tested and several examples illustrating the application of this
experimental system are presented.
The system has been used to image the structure of porous aluminum and the size and
distribution of pores was analyzed. The system was also used to image the structure of
Al/Al2O3/TiC hybrid composites manufactured by accumulated roll bonding (ARB) process and
this allowed analyzing the size distribution of reinforcing particles and voids. It was further
demonstrated that in-situ imaging of deformation can be used to image consecutive stages of
structural transformation (change in volume, change of position of reinforcing particles, creation
of voids etc.) in aluminum alloy and aluminum composites during application of tensile stress
and to illustrate the nucleation of failure.
This system of dynamic imaging at BMIT-BM at CLS can help in better description of
structural transformation associated with the application of stress and will contribute to better
understanding of the failure mechanisms of different types of materials during straining.
|
7 |
An examination of additive-mediated wax nucleation in oil-pipeline environmentsHennessy, Alison J. B. January 2001 (has links)
No description available.
|
8 |
Decay mechanisms of photoexcited molecular ionsRennie, Emma E. January 1997 (has links)
No description available.
|
9 |
Synchrotron radiation studies of resonance auger procrsses in solid rare earths and in some moleculesSairanen, Olli-Pekka. January 1992 (has links)
Thesis--Oulun yliopisto, 1992. / eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references.
|
10 |
Photon induced fluorescence studies of molecules using synchrotron radiationÁlvarez Ruiz, Jesús January 2003 (has links)
<p>This Licentiate thesis presents research accomplished at theSection of Atomic and Molecular Physics at the Royal Instituteof Technology in Stockholm using photon induced fluorescencespectroscopy (PIFS) during the last two years.</p><p>The main results presented are summarized:</p><p>- Neutral photodissociation in CO was observed aftersynchrotron photon excitation in the range 19-26 eV bycollecting dispersed fluorescence from excited neutral C atoms.Follow-up ab initio calculations point out CO Rydberg seriesconverging to the CO+ C and D states as precursors.</p><p>- The branching ratio between N2 + (B-X)(v=1,v=2) and (v=0,v=1)transitions in the 20-46 eV energy range reveals strongnon-Franck-Condon effects. Ab initio calculations indicate thatthe autoionization of certain superexcited states areresponsible for some of the structures present in the branchingratio curve, confirming the important role of non-Rydbergdoubly excited resonant states (NRDERS) in de-excitationprocesses above the ionization potential.</p><p>- Photon induced neutral dissociation processes in NO arereported. Neither Rydberg series nor other molecular states inNO known so far can account for the collected data. From abinitio calculations more information regarding the NO precursorstates and the mechanism behind the observed neutraldissociation were obtained.</p><p>- The details of a new experimental set-up for gas phasefluorescence measurements using synchrotron radiation aredescribed. It is able to perform simultaneous measurements ofdispersed and total fluorescence in the visible range. Thefirst results obtained with this set-up are presented,concerning fluorescence after excitation of the N2 molecules inthe N 1s edge.</p><p>These four studies conform the set of papers enclosed in theLicentiate thesis.</p><p>Finally a pre-study to further apply PIFS to speciespreviously excited by microwave discharge is included as futureplans.</p>
|
Page generated in 0.0918 seconds