Cement penetrability is a key factor in multifilament cement composites. However, the modes of action and the concepts vary because of brittle and ductile fibers. In the case of brittle fibers such as glass, high penetrability of cement products in between the bundle filaments can lead to brittle composite behavior, and therefore addition in ductility is required. In order to have efficient bundle action and high bonding, fillers can be introduced in between the glass filaments, keeping the telescopic mode of failure but at the same time improving the bond and stress transfer within the filaments of the bundle, even at late ages, resulting in a ductile and high strength composite. On the other hand, ductile fibers such as polypropylene (PP), which also developing low bonding with the cement matrix, result in ductile cement composite but with relatively low strength. Therefore, in this case good penetrability of the cement in between the filaments of the bundle is essential in order to maximize the reinforcing efficiency of the bundle by improving bond. The penetrability of the matrix into a fabric structure and especially in between the bundle filaments made up the fabric is a result of fiber- matrix compatibility, which depends on: level of opening and spaces between the filaments, bundle surface properties including wetting and chemical affinity to the cement matrix, matrix viscosity, processing of the composite, and the nature of the fabric junctions and the resulting tightening effects of the bundle, i.e., influenced by the fabric structure itself.

Cement penetrability is a key factor in multifilament cement composites. However, the modes of action and the concepts vary because of brittle and ductile fibers. In the case of brittle fibers such as glass, high penetrability of cement products in between the bundle filaments can lead to brittle composite behavior, and therefore addition in ductility is required. In order to have efficient bundle action and high bonding, fillers can be introduced in between the glass filaments, keeping the telescopic mode of failure but at the same time improving the bond and stress transfer within the filaments of the bundle, even at late ages, resulting in a ductile and high strength composite. On the other hand, ductile fibers such as polypropylene (PP), which also developing low bonding with the cement matrix, result in ductile cement composite but with relatively low strength. Therefore, in this case good penetrability of the cement in between the filaments of the bundle is essential in order to maximize the reinforcing efficiency of the bundle by improving bond. The penetrability of the matrix into a fabric structure and especially in between the bundle filaments made up the fabric is a result of fiber- matrix compatibility, which depends on: level of opening and spaces between the filaments, bundle surface properties including wetting and chemical affinity to the cement matrix, matrix viscosity, processing of the composite, and the nature of the fabric junctions and the resulting tightening effects of the bundle, i.e., influenced by the fabric structure itself.