In any geotechnical design procedure, the fundemantal point to be initially clearified is the characterization of existing soil profile at a site. This requires a great deal of planning a suitable site investigation program including borings, sampling, laboratory and in situ testing etc. Laboratory and in-situ (field) tests are important tools leading to the estimation of soils properties in geotechnics. Beside laboratory tests, the measurement of engineering properties in situ is a continuously growing and developing trend, particularly in materials difficult to obtain perfect undisturbed samples. For the purpose of this study, two large volumed geotechnical investigation reports are collected from a wide archive of 30 years experiences. Different soil types are encountered during the study like alluvial deposits of soft to stiff cohesive materials, hard clays in appearance of highly weathered rocks. The in-situ tests mostly being focused and studied on are &ldquo / Pressuremeter Test&rdquo / and &ldquo / Standard Penetration Test&rdquo / on cohesive materails. Over 350 standard penetration test results are recorded together with the pressuremeter results of relevant soils. Besides, the corresponding laboratory test results of oedometer, triaxial loading and all index properties of soils are assembled. The results of in-situ tests are evaluated together with the results of laboratory tests performed on the samples obtained from related sites. The correlations between in-situ &amp / laboratory test results on shear strength, compressibility and deformation characteristics of soils are analysed and compared with the existing correlations in literature. The correlations are generally obtained to be in agreement with the ones in common literature in cases where the soil conditions, particularly saturation, are same in both laboratory and in-situ tests.