Spelling suggestions: "subject:"photooxidative""
1 |
Termooxidační stabilita kompozitů PMMA / Thermooxidative stability of PMMA compositesČechová, Eva January 2012 (has links)
Tato práce se zabývá studiem termooxidační stability kompozitů polymethylmethakrylátu (PMMA) plněného mikro a nanočásticemi siliky. V připravených vzorcích byly použity různé objemové zlomky a různé velikosti částic siliky. Studium stability bylo prováděno pomocí termogravimetrie, která umožňuje simulovat podmínky termooxidační degradace. Indukční perioda byla stanovena za použití různých rychlostí ohřevu a aplikací izokonverzních metod. Závislosti teplot degradací na rychlostech ohřevu sloužily pro určení parametrů odvozených ze čtyř různých teplotních funkcí, které dovolují předpověď stability materiálu (indukční periody) při zvoleném rozsahu teplot. Zjištěné výsledky ukazují, že větší částice siliky snižuji stabilitu PMMA, zatímco nanočástice v nízkých koncentracích ji nijak neovlivňují.
|
2 |
Porovnání vlastností dvou výrobků pro umělá kluziště na bázi kaučuku etylén-propylen-dien / Properties comparison of two products used for skating rink based on ehtylene-propylene-dien rubberKostková, Jana January 2015 (has links)
This master thesis deals with characterization of two black and white products based on ethylene-propylene-diene rubber (EPDM) used for skating rink. Products marked with A and are different in their diameter of circular tubes trough which cooling medium passes and also in the distance of these tubes. Both of materials were characterized in order to determine whether it is the EPDM and how are they different. The characterization methods were used: differential scanning calorimetry, thermogravimetric analysis, attenuated total reflectance Fourier transform infrared spectroscopy, tensile test, swelling test, thermooxidative test. The composition of both materials, including fillers and others additives is almost the same but difference is in structure of EPDM and probably also in interaction with fillers, what exhibits different mechanical properties, thermooxidative stability and thermal capacity. These differences which have been found are essential for long-term use properties of both materials.
|
3 |
Testování pryžových těsnících prvků podrobených různým vnějším vlivům / Testing of commercial rubber sealing components exposed to different ambient conditionsJančaříková, Marie January 2016 (has links)
Diploma thesis studies the effect of temperature (75 and 105 °C) and the effect of 3 kinds of liquids (silicone and hydraulic oil and coolant) at room temperature and at 105 °C on change of the structure of 3 species butadiene-acrylonitrile (NBR) seals (o-ring and two types of bolts). The seals are inspected by the thermogravimetric analysis, differential scanning calorimetry and infrared spectroscopy, the influence of 105 °C on the o-rings is also evaluated in terms of changes in tensile properties. The greatest changes in the composition and structure are observed on o-rings particularly due to temperature of 105 °C, there was a significant reduction in dilatability and an increase in stiffness and glass transition temperature. The root cause is the surface and centre additive decomposition and oxidation. The bolts have suffered from decomposition of the protective surface layer and the additives in the centre, structural change was minor. Exposure to 75 °C has resulted in a gradual loss of low molecular weight substances. Liquids at room temperature didn‘t affect the structure of the seals, at 105 °C it caused a loss of weight due to decomposition of the protective surface layer and release of additives and the products of their decomposition. Results showed that the common use of the NBR seals at 105 °C is unsuitable, at 75 °C it leads to gradual changes, loss in mechanical and sealing properties.
|
4 |
Real-time ultrasonic diagnosis of polymer degradation and filling incompleteness in micromoulding.Whiteside, Benjamin R., Brown, Elaine, Ono, Y., Jen, C.K., Coates, Philip D. January 2005 (has links)
No / Injection moulding techniques have been miniaturised and refined to achieve micromoulding which aims to satisfy the need for mass production of low-cost micro- and nanoscale components. However, the microscale mould cavity features and extreme processing conditions which are inherent in the process can result in larger process variations than conventional injection moulding, with a corresponding increase in the probability of producing an unsatisfactory product. Accurate process diagnosis is required to ensure process reliability but integration of sensors onto the small and highly detailed mould units can be problematic and alternatives may need to be sought. Piezoelectric film ultrasonic transducers were integrated onto the extrusion barrel and mould insert of a micromoulding machine for real-time, non-destructive and non-intrusive process diagnosis with an ultrasonic pulse-echo technique. Polymer degradation owing to excessive heating at the extrusion barrel was successfully probed by measuring the ultrasonic velocities in the polymer at the mould insert. Filling incompleteness of the mould cavity was also sensitively detected by monitoring the ultrasonic energy variation transmitted into the part at different points along the melt flow length. The developed ultrasonic sensors and technique enable optimisation and in-process quality assurance of the moulded parts which ensures that maximum process efficiency can be achieved.
|
Page generated in 0.0757 seconds