This thesis analyses driving dynamics of tractors and its dependence on their weight and age. In the beginning, brief history of tractor development and definition of basic concept of the tractor analysis is described. The thesis states procedures for obtaining magnitudes necessary for determining of driving dynamics. Experimental part describes the realized measurement on chosen sample of tractors and interprets measured values. Last part of the thesis contains evaluation of the measurement results.

The diploma thesis focuses on the analysis of the internal acoustics of a tractor using the finite element method. The thesis also contains the analysis of excitation effects from individual sources of vibrations and evaluating the response in the internal acoustic chamber with special focus on the driver’s head. The conclusion should suggest appropriate structural modifications to reduce interior noise.

This diploma thesis “Analysis of powertrain impact on pull power capacity of a tractor” is focused on evaluation of measured data gained from performance testing of tractors Claas Arion 640 for two different types of transmission. There are also discussed the measuring methods and there is detailed described the function of measured transmissions.

This master’s thesis is deal with the design of the tractor’s front axle drive to enlarge its braking efficiency of the standing tractor fixed by the parking brake. In the first two chapters, the basic information related to the above stated issue is being summarized. Next, procedure of creating the design including the fundamental calculation proposal is being described. In the last chapter, the strain-stress analysis of the selected partial sections of the design is being presented. The final design is supported with the drawing documentation that is being part of this master’s thesis, too.

The thesis focuses on the shifting mechanisms of manually shifted tractor transmissions. It provides a comprehensive overview of all significant structural nodes of the shift mechanism with an analysis of the influence of the structure on the resulting intensity of a force required for shifting. The main aim of this thesis is the design and validation of experimental equipment for measuring the force effects of the shift mechanism of a mass-produced tractor in actual operation. The design of the experimental equipment is based on a study of the used measuring technique and similar experimental equipment. The final structure is selected based on selection by the method of weighted values, taking into consideration the requirements of the structure. A functional measuring chain is designed and formed for the realization of the measurement. To evaluate the data from the technical experiment, a multibody model of the designed experimental device is created in the MSC Adams View software, through which the real parameters of the shift mechanism are obtained from the measured values. The designed experimental equipment brings the possibility of complete analysis and subsequent optimization of the tractor's shift mechanism

This diploma thesis deals with corporate identity of a tractor manufacturer. For this purpose fictive company called Haart was created. The endeavour of this corporate identity is to make an image of a reliable company which specialises in the production of high-quality agricultural machines. This is accomplished by an orange-grey colour scheme where orange stands for living (agricultural production) and grey refers to lifeless (tractor is a machine). The final corporate identity is presented next to company stationery, merchandise, orientation graphics and web page also on the tractor designed within the pre-diploma project. For advertising graphics needs typeface Haart was created. Part of this diploma project is also the creation of a design manual. It describes all elements of Haart‘s corporate identity.

The subject of this thesis is to carry out stress-strain analysis of diesel particulate filter support on tractor. So it describes sequence of steps for the analysis model, such as geometry description, mesh generation, applied forces definition and others. Result of the analysis is assessed in terms of strength and improvement was proposed.

Förbränning av fossila bränslen är den största orsaken till ökade växthusgasutsläpp i atmosfären som i sin tur ligger till grund för klimatförändringarna. Europeiska Unionen uttrycker klimatförändringarna som ett existentiellt hot och har som mål att Europa ska bli en klimatneutral kontinent till år 2050. Arbetsmaskiner, som vanligtvis drivs på diesel, är ett energikrävande fordonsslag vid användning som år 2016 stod för 6 % av Sveriges totala växthusgasutsläpp. Vätgas kan vara ett alternativt drivmedel till diesel eller andra fossila drivmedel för att minska de utsläpp som arbetsmaskiner ger upphov till. Syftet med studien är att uppmärksamma arbetsmaskiners roll i en omställning till vätgasdrift samt sprida kunskap om vad en omställning skulle innebära för dagens användare av arbetsmaskiner. Detta görs genom att belysa möjlig etablering i nutid av fem utvalda vätgasdrivna arbetsmaskiner samt gestalta dem i ett framtida vätgassamhälle. De arbetsmaskiner som inkluderas i studien är hjullastare, pistmaskin, sopmaskin, traktor och motviktstruck. Metoden består av en förenklad litteraturöversyn i kombination med personlig kommunikation samt en anpassning av verktyget Technology Readiness Level (TRL) i syfte att bedöma den tekniska mognaden. Resultatet visar att det i dagsläget finns etableringsmöjligheter i olika former för samtliga arbetsmaskiner i regionen baserat på TRL. Vätgasdrivna motviktstruckar och sopmaskiner är båda tillräckligt mogna tekniker för att etableras direkt på marknaden genom inköp. Vätgasdrivna hjullastare, traktorer och pistmaskiner är fortfarande under utveckling och kan därför etableras i regionen genom forskning och ytterligare utveckling eller först efter produktlansering på marknaden. De utvalda vätgasdrivna arbetsmaskinerna kan verka i ett framtida vätgassamhälle på liknande vis som motsvarande fossildrivna arbetsmaskiner gör idag med fördelar som mindre miljöpåverkan, vibrationer och buller som i sin tur medför mindre underhållsbehov med tillhörande kostnader. Resultatet visar att det finns möjligheter redan idag att påskynda en förändring, inte bara i Gävleborg utan i hela Sverige. De utvalda arbetsmaskinerna är verksamma inom branscher som motsvarar stora delar av det svenska näringslivet, en omställning till vätgasdrift kan därför ha en stor betydelse för en nationell reducering av växthusgasutsläpp. Det finns stor potential, särskilt för aktörer inom industrin, att upprätta egen vätgasproduktion och därmed bli självförsörjande på vätgas som drivmedel till arbetsmaskiner. Detta kan bli en av de radikala förändringar som enligt EU behövs för att uppnå målet om att åstadkomma klimatneutralitet år 2050. / Burning of fossil fuels is the biggest cause of increased greenhouse gas (GHG) emissions into the atmosphere, which in turn leads to climate change. The European Union expresses climate change as an existential threat and aims to make Europe a climate-neutral continent by 2050. Non-road machinery vehicles (NMV), which are usually powered by diesel, are an energy-intensive type of vehicle during usage that in 2016 accounted for 6% of Sweden's total GHG emissions. Hydrogen can be an alternative fuel to diesel or other fossil fuels in order to reduce the emissions that originate from NMVs. The aim of this study is to draw attention to the role of NMVs in a conversion to hydrogen operation and to spread knowledge about what a conversion would mean for today's users of work machines. This is done by highlighting possible establishment in the present of five selected hydrogen powered NMVs and illustrate them in a future hydrogen society. The NMVs included in the study are wheel loaders, snow groomers, street sweepers, tractors and counterbalanced forklifts. The method consists of a simplified literature review in combination with personal communication and an adaptation of the tool Technology Readiness Level (TRL) in order to assess technical maturity. The results show that there are establishment opportunities in the present in various forms for all NMVs in Gävleborg based on TRL. Hydrogen powered counterbalanced forklifts and street sweepers are both sufficiently mature technologies to be established directly in the market through purchasing. Hydrogen powered wheel loaders, tractors and snow groomers are still under development and can therefore be established in the region through research and further development or after product launch. The selected hydrogen powered NMVs can operate in a future hydrogen society similarly to fossil-fueled NMVs but with benefits such as less environmental impact, vibrations and noise which in turn entails less maintenance needs with associated costs. There are opportunities already today to accelerate a change, not only in Gävleborg but throughout Sweden. The selected NMVs are active in industries that correspond to large parts of the Swedish business community, a transition to hydrogen operation can therefore be of great importance for a national reduction of GHG emissions. There is great potential, especially for players in the industry, to establish their own hydrogen production and thereby become self-sufficient in hydrogen intended for NMVs. This could be one of the radical changes that, according to the EU, are needed to achieve the goal of accomplishing climate-neutrality by 2050.