This work describes the design, construction a performance of such a complete wireless pager suitable for health care centers, rest homes, home application, for example for calling an attendant. This appliance is designed to be easy to attendance. A wireless transceiver is simplified and is attended only by one button. A wireless receiver also doesn't require a complicated manipulation. The aim is to create pager, which will be an useful assistant thanks to its price and simple construction.

Avec le contexte actuel des défis sécuritaires, la détection de petits objets devient un enjeu majeur pour lutter contre les actes malveillants. Mais les évolutions des technologies en bandes millimétriques et le potentiel de ces bandes, notamment autour de 60 GHz peuvent faciliter la conception de systèmes de plus en plus performants, permettant de répondre à ces enjeux. Cette thèse s’inscrit dans ce contexte pour proposer un système de détection ultra-large bande (ULB) millimétrique pour des applications de courte portée. Après un état de l'art détaillé des fondamentaux de la détection, nous présentons une validation de l'estimation de la surface équivalente radar (SER) par simulation avec le logiciel HFSS et par mesures en chambre anéchoïque. Ces deux études nous ont permis d'identifier les éléments essentiels à l'analyse système et les paramètres critiques de la détection d'objets canoniques cylindres et plaques. Une fois l'analyse système cernée, nous avons proposé une approche de détection multi-bande basée sur le radar monostatique pour améliorer la couverture de détection des systèmes, mais aussi et surtout pour pallier la limitation de la détection des objets en fonction de leur orientation par rapport à l'axe de viser de l'antenne. Nous avons également proposé une architecture (émetteur-récepteur) simple pouvant être associée au principe de détection. Le dimensionnement du système nous a permis d'identifier les amplificateurs faible bruit (LNAs) comme éléments critiques du récepteur et ainsi d'établir leurs spécifications pour atteindre les performances visées. Une comparaison des technologies SG13S de IHP et D007IH de OMMIC est menée dans la dernière partie de ce travail. Le choix de la technologie est justifié et la conception des LNAs sous ADS Keysight est détaillée. Une simulation de l'ensemble du système basée sur les performances des LNAs conçus et sur les simulations de SER est présentée pour illustrer la mise en œuvre de la détection. Enfin, les performances de la détection sont évaluées pour des cibles cylindriques et les apports du système proposé sont illustrés en comparaison avec une détection classique mono-bande / With the current context of security challenges, small objects detection is becoming a major issue in the fight against malicious acts. However, developments in millimeter-band technologies and the potential of these bands, particularly around 60 GHz, can facilitate the design of increasingly efficient systems to meet these challenges. This thesis is part of this context to propose an ultra-wideband (UWB) millimeter-wave detection system for short-range applications.After a detailed state-of-the-art of the fundamentals of detection, we present a validation of the radar cross-section (RCS) estimation by simulations with HFSS software and by measurements in anechoic chamber. These two studies allowed us to identify the essential elements for system analysis and the critical parameters for the detection of canonical objects such as cylinders and plates.Once the system analysis was identified, we proposed a multi-band detection approach based on monostatic radar to improve the detection coverage of the systems, but also and especially to overcome the limitation of objects detection according to their orientation in relation to the antenna boresight. We also proposed a simple architecture (transceiver) that could be associated with the detection principle. The system design allowed us to identify low noise amplifiers (LNAs) as critical elements of the receiver and thus establish their specifications to achieve the targeted performances.A comparison of IHP's SG13S and OMMIC's D007IH technologies is conducted in the last part of this work. The choice of technology is justified and the design of LNAs under ADS Keysight is detailed. A simulation of the entire system based on the performance of the designed LNAs and RCS simulations is presented to illustrate the implementation of detection. Finally, detection performances are evaluated for cylindrical targets and the contributions of the proposed system are illustrated in comparison with conventional single-band detection

This project investigates developing and implementing innovative indoornavigation systems by leveraging repurposed Wi-Fi infrastructure anddedicated RFM69HCW transceivers. Aimed at enhancing indoor positioningaccuracy, the study explores the viability of using Received Signal StrengthIndicator (RSSI) and dedicated device localization techniques to overcomethe limitations of existing Global Positioning System (GPS) technology inindoor environments. Through the design and testing of a printed circuit board(PCB) prototype that connects Raspberry Pi Pico (RPP) to RFM69HCWmodules and the development of custom drivers for the RP2040 processor,this research addresses the challenges of indoor navigation, such as signalvariability and environmental interference. The project also emphasizes theimportance of sustainable technology development by repurposing electronicwaste for innovative applications. Findings from the study reveal the potentialof these methodologies to improve indoor positioning accuracy despitechallenges related to hardware compatibility and the dynamic nature of indoorspaces. This research contributes to indoor navigation by demonstrating thefeasibility of using repurposed and dedicated hardware solutions, offeringinsights into future directions for enhancing indoor navigation systems, andhighlighting the role of sustainability in technological innovation.

Les systèmes radio impulsionnelle Ultra large bande (IR-ULB), de part la nature de leurs signaux et de leurs architectures, montrent des caractéristiques intéressantes pour concurrencer les technologies existantes (Zigbee, Bluetooth et RFID) pour certaines applications nécessitant un faible coût et une faible consommation de puissance. Dans ce contexte cette thèse évalue les potentialités des systèmes IR-ULB pour la réalisation d’objets communicants miniatures.En utilisant une technologie "System In Package" (SiP), des objets communicants ULB prototype intégrant une ou plusieurs puces CMOS et une antenne ULB directement réalisée sur le boîtier sont présentés dans la thèse. Les transitions entre le circuit imprimé et les puces sont réalisées avec des fils d'interconnexion ("wirebonding"). Les points d'étude de la thèse se focalisent particulièrement sur la mise en boîtier d'une puce ULB et sur la conception sur silicium de la tête radio fréquence d'un système ULB. La réalisation d'une interconnexion faible cout par "wirebonding" entre un circuit intégré ULB et son support est problématique aux fréquences utilisées en ULB (3-10 GHz) en raison des éléments parasites importants limitant sa bande passante. Pour obtenir une transition ne dégradant pas les signaux ULB, plusieurs méthodologies d’interfaçage sont proposées permettant de réaliser sans augmentation notable de cout une transition large bande entre le circuit intégré et le circuit imprimé du boîtier. L'intégration en technologie CMOS standard des éléments principaux constituant la tête radio fréquence d'un système ULB impulsionnel (LNA, détecteur d'impulsions et générateurs d'impulsions) est étudiée. L'intérêt d'un co-design entre le silicium et le circuit imprimé lors de la conception de ces éléments est mis en avant. L'intégration ainsi que la miniaturisation du système final dans une technologie SIP sont également présentées. / Due to the nature of their signals and their architectures, Impulse Radio Ultra Wide Band (IR-UWB) systems show interesting features to compete with existing technologies (Zigbee, Bluetooth and RFID UHF) for low cost and low power applications. In this context, this thesis evaluates the potential of UWB systems for the realization of miniature communication devices.The thesis presents UWB communicating devices realized with a System in Package (SiP) technology. Devices incorporate one or several CMOS chips and an antenna directly printed on the board (PCB). Transitions between the PCB and the chips are made with standard wire bonds. The thesis especially focuses on packaging of UWB dice and on the design of UWB front end radio frequency.Due to important parasitic elements limiting its bandwidth, wire bonds transition is problematic for UWB applications (3-10 GHz). This thesis proposes several methodologies to interface integrated circuit and PCB to obtain a broadband transition without increasing cost production. The integration in standard CMOS technology of main components comprising the UWB radio frequency front end (LNA, pulse detector and pulse generator) is studied. The interest of a co-design between silicon and PCB to design these elements is pointed up. Integration and miniaturization of the final system in a SIP technology are also presented.

Wireless operation, near-field or far-field, is a core functionality of any mobile or autonomous system. These systems are battery operated or most often utilize energy scavenging as a means of power generation. Limited access to power, expected long and uninterrupted operation, and constrained physical parameters (e.g. weight and size), which limit overall power harvesting capabilities, are factors that outline the importance for innovative low-power approaches and designs in advanced low-power wireless applications. Low-power approaches become especially important for the wireless transceiver, the block in charge of wireless/remote functionality of the system, as this block is usually the most power hungry component in an integrated system-on-chip (SoC). Three such advanced applications with stringent power requirements are examined including space-based exploratory remote sensing probes and their associated radiation effects, millimeter-wave phased-array radar for high-altitude tactical and geological imaging, and implantable biomedical devices (IMDs), leading to the proposal and implementation of low-power wireless solutions for these applications in SiGe BiCMOS and CMOS and platforms.

The research reported in this thesis is concerned with robust precoder and transceiver optimization in multiuser multi-antenna wireless communication systems in the presence of imperfect channel state information(CSI). Precoding at the transmit side, which utilizes the CSI, can improve the system performance and simplify the receiver design. Transmit precoding is essential for inter-user interference cancellation in multiuser downlink where users do not cooperate. Linear and non-linear precoding have been widely investigated as low-complexity alternatives to dirty paper coding-based transmission scheme for multiuser multiple-input multiple-output(MU-MIMO)downlink. Similarly, in relay-assisted networks, precoding at the relay nodes have been shown to improve performance. The precoder and joint precoder/receive filter (transceiver) designs usually assume perfect knowledge of the CSI. In practical systems, however, the CSI will be imperfect due to estimation errors, feedback errors and feedback delays. Such imperfections in CSI will lead to deterioration of performance of the precoders/transceivers designed assuming perfect CSI. In such situations, designs which are robust to CSI errors are crucial to realize the potential of multiuser multi-antenna systems in practice. This thesis focuses on the robust designs of precoders and transceivers for MU-MIMO downlink, and for non-regenerative relay networks in the presence of errors in the CSI. We consider a norm-bounded error(NBE) model, and a stochastic error(SE) model for the CSI errors. These models are suitable for commonly encountered errors, and they allow mathematically and computationally tractable formulations for the robust designs. We adopt a statistically robust design in the case of stochastic error, and a minimax or worst-case robust design in the case of norm-bounded error. We have considered the robust precoder and transceiver designs under different performance criteria based on transmit power and quality-of-service(QoS) constraints. The work reported in this thesis can be grouped into three parts, namely,i ) robust linear pre-coder and transceiver designs for multiuser downlink, ii)robust non-linear precoder and transceiver designs for multiuser downlink, and iii)robust precoder designs for non-regenerative relay networks. Linear precoding: In this part, first, a robust precoder for multiuser multiple-input single-output(MU-MISO)downlink that minimizes the total base station(BS)transmit power with constraints on signal-to-interference-plus-noise ratio(SINR) at the user terminals is considered. We show that this problem can be reformulated as a second order cone program(SOCP) with the same order of computational complexity as that of the non-robust precoder design. Next, a robust design of linear transceiver for MU-MIMO downlink is developed. This design is based on the minimization of sum mean square error(SMSE) with a constraint on the total BS transmit power, and assumes that the error in the CSI at the transmitter(CSIT) follows the stochastic error model. For this design, an iterative algorithm based on the associated Karush-Kuhn-Tucker(KKT) conditions is proposed. Our numerical results demonstrate the robust performance of the propose designs. Non-linear precoding: In this part, we consider robust designs of Tomlinson-Harashima precoders(THP) for MU-MISO and MU-MIMO downlinks with different performance criteria and CSI error models. For MU-MISO systems with imperfect CSIT, we investigate the problem of designing robust THPs under MSE and total BS transmit power constraints. The first design is based on the minimization of total BS transmit power under constraints on the MSE at the individual user receivers. We present an iterative procedure to solve this problem, where each iteration involves the solution of a pair of convex optimization problems. The second design is based on the minimization of a stochastic function of the SMSE under a constraint on the total BS transmit power. We solve this problem efficiently by the method of alternating optimization. For MU-MIMO downlink, we propose robust THP transceiver designs that jointly optimize the TH precoder and receiver filters. We consider these transceiver designs under stochastic and norm-bounded error models for CSIT. For the SE model, we propose a minimum SMSE transceiver design. For the NBE model, we propose three robust designs, namely, minimum SMSE design, MSE-constrained design, and MSE-balancing design. Our proposed solutions to these robust design problems are based on iteratively solving a pair of sub-problems, one of which can be solved analytically, and the other can be formulated as a convex optimization problem that can be solved efficiently. Robust precoder designs for non-regenerative relay networks: In this part, we consider robust designs for two scenarios in the case of relay-assisted networks. First, we consider a non-regenerative relay network with a source-destination node pair assisted by multiple relay nodes, where each node is equipped with a single antenna. The set of the cooperating relay nodes can be considered as a distributed antenna array. For this scenario, we present a robust distributed beam former design that minimizes the total relay transmit power with a constraint on the SNR at the destination node. We show that this robust design problem can be reformulated as a semi-definite program (SDP)that can be solved efficiently. Next, we consider a non-regenerative relay network, where a set of source-destination node pairs are assisted by a MIMO-relay node, which is equipped with multiple transmit and multiple receive antennas. For this case, we consider robust designs in the presence of stochastic and norm-bounded CSI errors. We show that these problems can be reformulated as convex optimization problems. In the case of norm-bounded error, we use an approximate expression for the MSE in order to obtain a tractable solution.

Parameter estimation and signal detection are the two key components of a wireless communication system. They directly impact the bit-error-ratio (BER) performance of the system. Several criteria have been successfully applied for parameter estimation and signal detection. They include maximum likelihood (ML), maximum a-posteriori probability (MAP), least square (LS) and minimum mean square error (MMSE) etc. In the linear detection framework, linear MMSE (LMMSE) and LS are the most popular ones. Nevertheless, these criteria do not necessarily minimize the BER, which is one of the key aspect of any communication receiver design. Thus, minimization of BER is tantamount to an important design criterion for a wireless receiver, the minimum bit/symbol error ratio (MBER/MSER). We term this design criterion as the minimum-error-probability (MEP). In this thesis, parameter estimation and signal detection have been extensively studied based on the MEP framework for various unexplored scenar-ios of a wireless communication system. Thus, this thesis has two broad categories of explorations, first parameter estimation and then signal detection. Traditionally, the MEP criterion has been well studied in the context of the discrete signal detection in the last one decade, albeit we explore this framework for the continuous parameter es-timation. We first use this framework for channel estimation in a frequency flat fading single-input single-output (SISO) system and then extend this framework to the carrier frequency offset (CFO) estimation of multi-user MIMO OFDM system. We observe a reasonably good SNR improvement to the tune of 1 to 2.5 dB at a fixed BER (tentatively at 10−3). In this context, it is extended to the scenario of multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) or MIMO-OFDM with pa-rameter estimation error statistics obtained from LMMSE only and checked its effect at the equalizer design using MEP and LMMSE criteria. In the second exploration of the MEP criterion, it is explored for signal detection in the context of MIMO-relay and MIMO systems. Various low complexity solutions are proposed to alleviate the effect of high computational complexity for the MIMO-relay. We also consider various configurations of relay like cognitive, parallel and multi-hop relaying. We also propose a data trans-mission scheme with a rate of 1/Ns (Ns is the number of antennas at the transmitter) with the help of the MEP criterion to design various components. In all these cases, we obtain considerable BER improvement compared to the existing solutions.

Les réseaux de capteurs sans fil nécessitent des fonctions de calcul et de transmissionradio associées à chaque capteur. Les SoCs RF intégrant ces fonctions doivent avoir uneautonomie la plus grande possible et donc une très faible consommation. Aujourd'hui, leursperformances énergétiques pourraient être fortement améliorées par des systèmes d'alimentationinnovants. En effet, les circuits d'alimentation remplissent leur fonction classique de conversiond'énergie mais aussi des fonctions d'isolation des blocs RF et digitaux. Leurs performancess'évaluent donc en termes d'efficacité énergétique et de réponse transitoire mais aussi d'isolationentre blocs et de réjection de bruit.Ce travail de thèse concerne l'intégration du système de gestion et de distribution del’énergie aux différents blocs RF d’un émetteur/récepteur en élaborant une méthodologie « topdown» pour déterminer la sensibilité de chaque bloc à son alimentation et en construisant unearchitecture innovante et dynamique de gestion/distribution de l'énergie sur le SoC. Cetteméthodologie repose sur la disponibilité de régulateurs de tension présentant des performancesadaptées. Un deuxième volet du travail de thèse a donc été de réaliser un régulateur linéaire detype LDO à forte réjection sur une bande passante relativement large et bien adapté àl'alimentation de blocs RF très sensibles aux bruits de l'alimentation. / Wireless sensor networks require calculation functions and radiofrequencytransmission modules within each sensor. RF SoCs integrating these functions must have thebiggest battery life and so a very small consumption. Today, innovative power managementsystems could highly enhance the energy performances of this type of RF SoC. Indeed, thesepower systems perform energy conversion and also the isolation functions of RF and digitalblocks. Their features are thus estimated in terms of energy efficiency, transient response and alsoisolation between blocks and noise rejection.This thesis work concerns the integration of the power management systems and itsdistribution channels into different ultra-low-power SoCs. This was achieved mainly thanks to thedevelopment of a new “top-down” approach. This new methodology consists of determining thesensibility of every block to its power supply and of designing an innovative and dynamicarchitecture of power management circuits on the SoC. This study ends up in the implementationof a very efficient low dropout (LDO) regulator for noise-sensitive low-current RF blocks inmixed SoC applications. The fabricated prototype achieves a high power supply rejection for awide range of frequencies.

The radio frequency (RF) spectrum as a natural resource is severely under-utilized over time and space due to an inefficient licensing framework. As a result, in-creasing cellular and wireless network usage is placing significant demands on the licensed spectrum. This has led to the development of cognitive radios, software defined radios and mm-wave radios. Cognitive radios (CRs) enable more efficient spectrum usage over a wide range of frequencies and hence have emerged as an effective solution to handle huge network demands. They promise versatility, flex-ability and cognition which can revolutionize communications systems. However, they present greater challenges to the design of radio frequency (RF) front-ends. Instead of a narrow-band front-end optimized and tuned to the carrier frequency of interest, cognitive radios demand front-ends which are versatile, configurable, tun-able and capable of transmitting and receiving signals with different bandwidths and modulation schemes. The primary purpose of this thesis is to design a re-configurable, wide-band and low phase-noise fast settling frequency synthesizer for cognitive radio applications. Along with frequency generation, an area efficient multi-band low noise amplifier (LNA) with integrated built-in-self-test (BIST) and a strong immunity to interferers has also been proposed and implemented for these radios. This designed LNA relaxes the specification of harmonic content in the synthesizer output. Finally some preliminary work has also been done for mm-wave (V-band) frequency synthesis. The Key Contributions of this thesis are: A frequency synthesizer, based on a type-2, third-order Phase Locked Loop (PLL), covering a frequency range of 0.1-5.4 GHz, is implemented using a 0.13 µm CMOS technology. The PLL uses three voltage controlled oscillators (VCOs) to cover the whole range. It is capable of switching between any two frequencies in less than 3 µs and has phase noise values, compatible with most communication standards. The settling of the PLL in the desired state is achieved in dynamic multiple steps rather than traditional single step settling. This along with other circuit techniques like a DAC-based discriminator aided charge pump, fast acquisition pulse-clocked based PFD and timing synchro-negation is used to obtain a significantly reduced settling time A single voltage controlled LC-oscillator (LC-VCO) has been designed to cover a wide range of frequencies (2.0-4.1 GHz) using an area efficient and switch-able multi-tap inductor and a capacitor bank. The switching of the multi-tap inductor is done in the most optimal manner so as to get good phase-noise at the output. The multi-tap inductor provides a significant area advantage, and in spite of a degraded Q, provides an acceptable phase noise of -123 dBc/Hz and -113 dBc/Hz at an offset of 1 MHz at carrier frequencies of 2 and 4 GHz, respectively. Implemented in a 0.13 µm CMOS technology, the oscillator with ≈ 69 % tuning range, occupies an active area of only 0.095 mm2. An active inductor based noise-filter has been proposed to improve the phase-noise performance of the oscillator without much increase in the area. A variable gain multi-band low noise amplifier (LNA) is designed to operate over a wide range of frequencies (0.8 GHz to 2.4 GHz) using an area efficient switchable-π network. The LNA can be tuned to different gain and linearity combinations for different band settings. Depending upon the location of the interferers, a specific band can be selected to provide optimum gain and the best signal-to-intermodulation ratio. This is accomplished by the use of an on-chip Built-in-Self-Test (BIST) circuit. The maximum power gain of the amplifier is 19 dB with a return loss better than 10 dB for 7 mW of power consumption. The noise figure is 3.2 dB at 1 GHz and its third-order intercept point (I I P3) ranges from -15 dBm to 0 dBm. Implemented in a 0.13 µm CMOS technology, the LNA occupies an active area of about 0.29 mm2. Three different types of VCOs (stand-alone LC VCO, push-push VCO and a ring oscillator based VCO) for generating mm-wave frequencies have been implemented using 65-nm CMOS technology and their measured results have been analyzed

Abstract This thesis focuses on the design of coordinated downlink beamforming techniques for wireless multi-cell multi-user multi-antenna systems. In particular, cellular and cognitive radio networks are considered. In general, coordinated beamforming schemes aim to improve system performance, especially at the cell-edge area, by controlling inter-cell interference. In this work, special emphasis is put on practical coordinated beamforming designs that can be implemented in a decentralized manner by relying on local channel state information (CSI) and low-rate backhaul signaling. The network design objective is the sum power minimization (SPMin) of base stations (BSs) while providing the guaranteed minimum rate for each user. Decentralized coordinated beamforming techniques are developed for cellular multi-user multiple-input single-output (MISO) systems. The proposed iterative algorithms are based on classical primal and dual decomposition methods. The SPMin problem is decomposed into two optimization levels, i.e., BS-specific subproblems for the beamforming design and a network-wide master problem for the inter-cell interference coordination. After the acquisition of local CSI, each BS can independently compute its transmit beamformers by solving the subproblem via standard convex optimization techniques. Interference coordination is managed by solving the master problem via a traditional subgradient method that requires scalar information exchange between the BSs. The algorithms make it possible to satisfy the user-specific rate constraints for any iteration. Hence, delay and signaling overhead can be reduced by limiting the number of performed iterations. In this respect, the proposed algorithms are applicable to practical implementations unlike most of the existing decentralized approaches. The numerical results demonstrate that the algorithms provide significant performance gains over zero-forcing beamforming strategies. Coordinated beamforming is also studied in cellular multi-user multiple-input multiple-output (MIMO) systems. The corresponding non-convex SPMin problem is divided into transmit and receive beamforming optimization steps that are alternately solved via successive convex approximation method and the linear minimum mean square error criterion, respectively, until the desired level of convergence is attained. In addition to centralized design, two decentralized primal decomposition-based algorithms are proposed wherein the transmit and receive beamforming designs are facilitated by a combination of pilot and backhaul signaling. The results show that the proposed MIMO algorithms notably outperform the MISO ones. Finally, cellular coordinated beamforming strategies are extended to multi-user MISO cognitive radio systems, where primary and secondary networks share the same spectrum. Here, network optimization is performed for the secondary system with additional interference constraints imposed for the primary users. Decentralized algorithms are proposed based on primal decomposition and an alternating direction method of multipliers. / Tiivistelmä Tämä väitöskirja keskittyy yhteistoiminnallisten keilanmuodostustekniikoiden suunnitteluun langattomissa monisolu- ja moniantennijärjestelmissä, erityisesti solukko- ja kognitiiviradioverkoissa. Yhteistoiminnalliset keilanmuodostustekniikat pyrkivät parantamaan verkkojen suorituskykyä kontrolloimalla monisoluhäiriötä, erityisesti tukiasemasolujen reuna-alueilla. Tässä työssä painotetaan erityisesti käytännöllisten yhteistoiminnallisten keilanmuodostustekniikoiden suunnittelua, joka voidaan toteuttaa hajautetusti perustuen paikalliseen kanavatietoon ja tukiasemien väliseen informaationvaihtoon. Verkon suunnittelutavoite on minimoida tukiasemien kokonaislähetysteho samalla, kun jokaiselle käyttäjälle taataan tietty vähimmäistiedonsiirtonopeus. Hajautettuja yhteistoiminnallisia keilanmuodostustekniikoita kehitetään moni-tulo yksi-lähtö -solukkoverkoille. Oletuksena on, että tukiasemat ovat varustettuja monilla lähetysantenneilla, kun taas päätelaitteissa on vain yksi vastaanotinantenni. Ehdotetut iteratiiviset algoritmit perustuvat klassisiin primaali- ja duaalihajotelmiin. Lähetystehon minimointiongelma hajotetaan kahteen optimointitasoon: tukiasemakohtaisiin aliongelmiin keilanmuodostusta varten ja verkkotason pääongelmaan monisoluhäiriön hallintaa varten. Paikallisen kanavatiedon hankkimisen jälkeen jokainen tukiasema laskee itsenäisesti lähetyskeilansa ratkaisemalla aliongelmansa käyttäen apunaan standardeja konveksioptimointitekniikoita. Monisoluhäiriötä kontrolloidaan ratkaisemalla pääongelma käyttäen perinteistä aligradienttimenetelmää. Tämä vaatii tukiasemien välistä informaationvaihtoa. Ehdotetut algoritmit takaavat käyttäjäkohtaiset tiedonsiirtonopeustavoitteet jokaisella iterointikierroksella. Tämä mahdollistaa viiveen pienentämisen ja tukiasemien välisen informaatiovaihdon kontrolloimisen. Tästä syystä ehdotetut algoritmit soveltuvat käytännön toteutuksiin toisin kuin useimmat aiemmin ehdotetut hajautetut algoritmit. Numeeriset tulokset osoittavat, että väitöskirjassa ehdotetut algoritmit tuovat merkittävää verkon suorituskyvyn parannusta verrattaessa aiempiin nollaanpakotus -menetelmiin. Yhteistoiminnallista keilanmuodostusta tutkitaan myös moni-tulo moni-lähtö -solukkoverkoissa, joissa tukiasemat sekä päätelaitteet ovat varustettuja monilla antenneilla. Tällaisessa verkossa lähetystehon minimointiongelma on ei-konveksi. Optimointiongelma jaetaan lähetys- ja vastaanottokeilanmuodostukseen, jotka toistetaan vuorotellen, kunnes algoritmi konvergoituu. Lähetyskeilanmuodostusongelma ratkaistaan peräkkäisillä konvekseilla approksimaatioilla. Vastaanottimen keilanmuodostus toteutetaan summaneliövirheen minimoinnin kautta. Keskitetyn algoritmin lisäksi tässä työssä kehitetään myös kaksi hajautettua algoritmia, jotka perustuvat primaalihajotelmaan. Hajautettua toteutusta helpotetaan pilottisignaloinnilla ja tukiasemien välisellä informaationvaihdolla. Numeeriset tulokset osoittavat, että moni-tulo moni-lähtö -tekniikoilla on merkittävästi parempi suorituskyky kuin moni-tulo yksi-lähtö -tekniikoilla. Lopuksi yhteistoiminnallista keilanmuodostusta tarkastellaan kognitiiviradioverkoissa, joissa primaari- ja sekundaarijärjestelmät jakavat saman taajuuskaistan. Lähetystehon optimointi suoritetaan sekundaariverkolle samalla minimoiden primaarikäyttäjille aiheuttamaa häiriötä. Väitöskirjassa kehitetään kaksi hajautettua algoritmia, joista toinen perustuu primaalihajotelmaan ja toinen kerrointen vaihtelevan suunnan menetelmään.