The thesis deals with the design and construction of a switching power supply with output voltage adjustable from 0 to 1200 V and rated power of 120 W, which will be used to replace the existing high voltage power supply for the irreversible electroporation (IRE) device developed at UVEE FEEC BUT. The thesis focuses on a basic description of the IRE device, a description of usable converter topologies and a selection of the best topology for the required purpose. The selection of the control circuit concept and its design are also integral parts of the thesis. The final part of the thesis contains the assembly of the power supply and the measurement verifying its function.

This master’s thesis deals with the design of the switching power supply on the principle of high frequency converter. The goal of this thesis is construction of converter which is using GaN MOSFET transistors and SiC diodes for switching. The converter uses two switch forward power supply topology. Unusually high switching frequency was chosen for the design with power transformer with open magnetic core. The outcome of this work is functional converter which is primarily intended for educational and demonstrational purposes. Multiple parts of this converter are divided into individual blocks, which can be further used for construction of other types of switching converters.

This master thesis is focused on proposition and following implementation of DC arc welder. This paper is based on semester’s paper, where the first version was realized. The welder is powered by a battery pack with LiFePO4 type cells. Battery cells are protected by BMS circuits. The driving electronics controls the duty cycle step-down (buck) converter in a closed current or power regulation loop. The power regulator has been designed and validated by simulations. Switching power transistors, low side and high side, are implemented by optically isolated gate drivers. Charging the battery is solved by a switching flyback converter. For the charger and the welder is sheet metal construction made of aluminum sheet.

This thesis contains a complete description of the design and implementation of a 500W transformer soldering station. This soldering station includes a half-bridge DC/DC converter with a pulse transformer. The device works with a very low voltage and extremely high output current. Therefore some parts have a special design to ensure the proper equipment function. Coaxial transformer with very low leakage inductance (nH units) is unusual. A synchronous rectifier is another special feature working with low voltage and high output current of the transformer. The finished functional prototype consists of a soldering station and a soldering adapter.