1 |
Electrochemical Quartz Crystal Microbalance Study Of Bismuth Underpotential Deposition On Ruthenium And On Electrochemically Formed Ruthenium OxideLin, Po-Fu 12 1900 (has links)
Kinetics and thermodynamics of bismuth (Bi) underpotential deposition (UPD) on ruthenium (Ru) and on electrochemically formed Ru oxide are studied using electrochemical quartz crystal microbalance technique. The Bi UPD and Bi bulk deposition are observed both on Ru and on electrochemically formed Ru oxide electrodes. The anodic peak potential of Bi UPD shifts slightly to positive potential as the scan rate increases. The peak current ratio (IAnode/ICathode) of Bi UPD and Bi bulk increases as the scan rate increases. Bi monolayer coverage calculated from mass (MLMass) and from charge (MLCharge) with scan rates dependent are compared both in Bi UPD region and in Bi bulk region. Stability and oxidation time effects are also investigated. Bi UPD on Ru and on electrochemically formed Ru oxide are quasi-reversible, scan rate independent, oxidation time dependent, and have higher plating efficiency on Ru. However, Bi bulk deposition on Ru and on electrochemically formed Ru oxide are quasi-reversible, scan rate dependent, oxidation time independent, and have higher plating efficiency on electrochemically formed Ru oxide. Both Bi UPD adatoms and Bi bulk are unstable in 0.5M H2SO4.
|
2 |
FUNCTIONAL CHARACTERIZATION OF UPD3 IN DROSOPHILA DEVELOPMENTWang, Liqun 01 January 2008 (has links)
The JAK/STAT pathway is a non-receptor tyrosine kinase signaling pathway that is well conserved and highly re-utilized in many mammalian and Drosophila developmental processes. Compared to dozens of ligands and receptors in mammalian JAK/STAT, Drosophila JAK/STAT pathway is simpler with one receptor and three ligands, Upd, Upd2 and Upd3, which have similar amino acid sequences. Previous literature shows that upd and upd2 exhibit the same dynamic striped expression pattern in embryos and have semi-redundant functions during embryogenesis. Do Upd and Upd3 also have redundant functions? To answer this question, the functions of Upd3 in Drosophila development were investigated in this dissertation. In addition, the coordinate expression mechanism of upd and upd3 in eye discs was also analyzed.
To study the functions of Upd3 in development, the expression pattern of upd3 was examined and detected in larval eye discs, wing discs, haltere discs, lymph glands and adult ovaries with in situ hybridization to upd3 mRNA and an upd3 reporter line. Consistent with the expression pattern, the loss of function mutants of upd3 exhibit small eyes, outstretched wings, downward extended halteres and reduced circulating blood cell concentration, demonstrating the roles of Upd3 in these tissues’ development. However, functions of Upd3 in other aspects of immune response were not detected.
To investigate the mechanism of the coordinate expression of upd and upd3, the genetic and molecular relationship of upd, upd3 and os was dissected. The os alleles, oso, oss and os1, are a group of classical alleles which display outstretched wings, small eyes, or both, respectively. The genetic complementation tests of upd, upd3 and os showed that both upd and upd3 failed to complement os while upd complemented upd3, suggesting functions of both upd and upd3 are affected in os alleles. Consistent with the genetic tests, the expression of upd and upd3 in eye discs is lost in os allele. Molecularly, putative enhancer regions are deleted at the 5’ end of upd3 in os alleles. Hence, a transcriptional co-regulation model of upd and upd3 is proposed in which upd and upd3 share a common cis-regulatory region, lesions of which cause the os phenotype.
|
3 |
Caracterización electroquímica de nanoparticulas de oro: relación entre la forma tridimensional de la partícula y su orientación superficialHernández Ferrer, Javier 17 June 2008 (has links)
No description available.
|
4 |
The Effect of Metal Solution Contaminants on the Electro-catalyst Activities of Direct Methanol Fuel CellJalil Pour Kivi, Soghra 08 February 2019 (has links)
Direct methanol fuel cells (DMFCs) are considered a clean source of electrical power for future energy demand, creating a potential to reduce our dependency on fossil fuels. Despite their advantages, including high energy density, efficiency and easy handling and distribution of fuel, the commercialization of DMFCs has suffered from some drawbacks, including methanol crossover and contamination of the system. Metal cation contaminants (such as Ni, Co, etc) introduced through the degradation of fuel cell components (bipolar plate and electro-catalyst layer) can significantly affect the Nafion-membrane properties and overall fuel cell performance. In the current study, a systematic approach is taken to characterize and identify the mechanism of the effect of metal solution contaminants on the activities of electro-catalysts of DMFCs.
Cyclic voltammetry and rotating disk electrode (RDE) techniques were utilized in order to characterize the effect of various concentrations (i.e., 2x10-x M (x=1-7)) of six metal solution contaminants (i.e., Co, Ni and Zn with sulfate and nitrate as counter-anions) on the voltammetric properties and electro-catalytic activity of polycrystalline Pt during methanol oxidation reaction (MOR) and oxygen reduction reaction (ORR). The results showed a decrease in the MOR and ORR activities of Pt as the concentration of metal solution increased. The effect of counter-anion on the Pt activity was further investigated. The results showed that a combined effect of counter-anions and metal cations may be responsible for the decrease in the electro-catalytic activity of Pt.
The effect of metal solution contaminants on the Nafion-ionomer of anode electro-catalysts was investigated using Nafion-coated Pt electrode. Voltammetric properties and MOR activities of Nafion-coated and bare Pt electrodes in the presence of Ni solution contaminants were characterized using cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The overall results showed a significant negative effect of Ni solution contaminants on the electro-catalytic activity of bare Pt electrode as compared to the Nafion-coated Pt electrode. Based on the results, it appears that Nafion-ionomer film may interact with metal cations (through its sulfonate groups) and repel them away from the Pt active sites, partially inhibiting the negative effect of metal cations on the Pt activity of Nafion-coated Pt electrode.
The effect of metal solution contaminants on the carbon-supported platinum nanoparticle (Pt/C) with various Nafion-ionomer distributions and contents (i.e., Nafion-incorporated Pt/C and Nafion-coated Pt/C electrodes) was further investigated. Cyclic voltammetry and EIS techniques were employed to characterize the effect of Ni solution contaminants on the voltammetric properties and MOR activities of Nafion-incorporated and Nafion-coated Pt/C electrodes. The overall results showed a stronger negative effect of Ni solution contaminants on the electro-catalytic activity of Nafion-incorporated Pt/C electrodes as compared to the Nafion-coated Pt/C electrodes. This further confirms previous observations showing the sulfonate groups of Nafion-ionomer film may attract the Ni metal cations, localize them away from the Pt active sites, and subsequently suppress the negative effect of cations on the activity of Nafion-coated Pt/C electrodes.
|
5 |
Usability Problem Diagnosis tool: Development and EvaluationMahajan, Reenal R. 15 July 2003 (has links)
Usability evaluation results in several usability problems and the non-UE developer is often not a part of the evaluation as it might deter the participant from reporting all the errors and also, conducting usability evaluation is a usability engineer's responsibility. Thus the evaluator needs to create unambiguous usability problem reports, which will help the developer fix the usability problems.
This research involves the development and evaluation of the Usability Problem Diagnosis tool, which supports problem diagnosis through analysis and storage in a common database shared between the evaluation and the development team. This tool uses the User Action Framework as an underlying knowledge base to support problem diagnosis. / Master of Science
|
6 |
Loss of heterozygosity in acute myeloid leukaemia with normal karyotype / Allelverlust bei Patienten mit akuter myeloischer Leukämie und normalem KaryotypTraikov, Sofia 16 November 2009 (has links) (PDF)
Loss of heterozygosity (LOH) is detectable in many forms of cancer including leukaemia. It contributes to tumorigenesis through the loss of one of the two alleles of one tumor suppressor gene at a given locus, caused by deletion or uniparental disomy (UPD). UPD can only be the result of homologous recombination. Little is known about the mechanisms of UPD and what connection this aberration has with the outcome of this disease.
In this study, 146 patients with primary AML were analysed using a novel technique based on single nucleotide polymorphisms (SNPs). Leukaemic cells and healthy T-cells from each patient were obtained using FACS-Vantage cell sorting. In cases with very few sorted cells whole genome preamplification was done. Genome-wide SNP analysis was carried out according to the standard GeneChip Mapping Assay protocol (Affymetrix, USA) using the Human Mapping 10K Arrays. Moreover, the impact of the FLT3-ITD mutation on the homologous recombination using pmHPRT-DRGFP /pCbASce vectors system and yHA2x assay was investigated.
Of 146 patients with normal karyotype LOH was found in 30 cases. The potential LOH regions, were confirmed by microsatellite analysis of short tandem repeat (STR) markers. In 21 of these cases STR-analysis of T-cells, representing the corresponding tumor-free material, confirmed the regions of partial UPD. This aberration affected different chromosomes, but most commonly chr. 2, 6, 11, 21, 13, and 7, and covered between 11.5 and 88 Mb. Interestingly, in 6 LOH cases, long stretches of homozygosity present at the same positions as in the healthy cells and in the blasts were found. The impact of this phenomenon is unknown. Additionally, chromosome losses were detected in 3 patients classified with normal karyotype according to current methods. These 9 cases were not included in the UPD positive group.
No differences were observed regarding any clinical factors including age, WBC-counts and sex. The FAB M1 subtype was observed in 47.6% of the UPD positive patients, compared to only 19.2% of the UPD negative patients (P=0.04, n=146). In addition, no correlation between FLT3-ITD, MLL-PTD and NPM1 mutations in the UPD patients was found, but the data indicate that patients with UPD have a higher rate of treatment failure.
Moreover, in this study the relationship between UPD and gene aberrations was able to be confirmed. In some cases, UPD found on chromosomes 21, 19 and 11 was correlated with mutations in the RUNX1, CEBPA and WT genes, respectively. Furthermore, AML cases with and without UPD showed different but specific gene expression profiles, revealing different expression levels for genes involved in double strand break repairs.
Furthermore, it was found that different mutations could be responsible for the increase in efficiency of HR, such as FLT3-ITD or BCR-ABL. Moreover, cells with a FLT3-ITD mutation (without wt expression) rapidly increased the HR efficiency compared with heterozygous (FLT3-ITD/wt) cells. Preliminary results showed that the high repair efficiency was mainly dependent on the translocation of RAD51.
In conclusion, SNP array technology allow the identification and mapping of LOH in AML patients with normal karyotype. The obtained data also point out the necessity of analysing tumour-free material to confirm the somatic origin of the alteration. Furthermore, the available results indicate that compared to patients without UPD, patients with UPD have a higher relapse rate, which might be used as a prognostic marker in the future. Also, it could be hypothesized that downregulation of RAD51 (for example by FLT3 inhibition) might be beneficial DNA damage occurs through the genotoxic agent by reducing the relapse risk of AML.
|
7 |
Electrodéposition et la caractérisation de nanofilms palladium sur Au (111) pour le stockage d'hydrogène Electro-deposition and characterization of palladium nanofilms on Au (111) for hydrogen storage / Electro-deposition and characterization of palladium nanofilms on Au(111) for hydrogen storageWang, Liang 21 December 2012 (has links)
Ce travail de thèse s’est intéressé au dépôt électrochimique de filmsde palladium ultra-minces sur Au(111), à leur caractérisation et àl’insertion d'hydrogène dans ceux-ci. La caractérisation des nanofilmsen milieu sulfurique montre des signatures bien définies, qui évoluentavec l’épaisseur des dépôts. Nous avons pu attribuer à chaque pic uneréaction spécifique, en accord avec les mécanismes de croissancerévélés par les mesures SXRD in situ. La croissance pseudomorphede la 1ère couche se fait avec une première étape d'adsorption, suiviepar un mécanisme de nucléation et croissance. La croissance 3D de latroisième couche démarre avant la fin de la deuxième couchepseudomorphe.L'absorption d'hydrogène dans les nanofilms a été étudiée en milieusulfurique. L’isotherme d’insertion présente un élargissement dudomaine de la solution solide, un plateau avec une pente dans ledomaine bi-phasique et une diminution du taux maximal d'insertion del’hydrogène par rapport au Pd massif. Ce taux diminue avecl’épaisseur mai approche celui de Pd massif au déla delà de 15 MC.Deux éléments ont été considérés pour expliquer le comportement desisothermes: les deux premières couches pseudomorphes sontcontraintes par le support et des « tours » tridimensionnelles relaxéesse forment au delà de la 2ème couche. / This thesis focused on electro-deposition, characterization andhydrogen strorage of ultrathin palladium film over Au(111). Theelectrochemical characterization of the nanofilms in sulphuric mediumshows well-defined features evolving with the deposit thickness. Wecould assign each peak to a specific reaction, in agreement with thegrowth mechanisms revealed by in situ SXRD measurements. Thepseudomorphic growth of the 1st layer firstly undergoes an adsorptionstep, followed by nucleation and growth mechanism, as shown bycurrent transient measurements. 3D growth of the 3rd layer beginsbefore the completion of the second pseudomorphic one.Hydrogen absorption in the nanofilms was studied in sulphuric mediumas well. Isotherms show an enlargement of the solid solution domain, asloppy plateau in the two-phase region, a decrease of maximuminsertion ratio (H/Pd)max compared to bulk Pd. This last valuedecreases with film thickness, approaching bulk Pd beyond about15 ML. Two contributions were considered to explain the isothermbehaviour: the two first Pd layers heavily constraint by the substrateand the 3D “towers like” relaxed structures growing on the secondpseudomorphic Pd layer.
|
8 |
Loss of heterozygosity in acute myeloid leukaemia with normal karyotypeTraikov, Sofia 02 November 2009 (has links)
Loss of heterozygosity (LOH) is detectable in many forms of cancer including leukaemia. It contributes to tumorigenesis through the loss of one of the two alleles of one tumor suppressor gene at a given locus, caused by deletion or uniparental disomy (UPD). UPD can only be the result of homologous recombination. Little is known about the mechanisms of UPD and what connection this aberration has with the outcome of this disease.
In this study, 146 patients with primary AML were analysed using a novel technique based on single nucleotide polymorphisms (SNPs). Leukaemic cells and healthy T-cells from each patient were obtained using FACS-Vantage cell sorting. In cases with very few sorted cells whole genome preamplification was done. Genome-wide SNP analysis was carried out according to the standard GeneChip Mapping Assay protocol (Affymetrix, USA) using the Human Mapping 10K Arrays. Moreover, the impact of the FLT3-ITD mutation on the homologous recombination using pmHPRT-DRGFP /pCbASce vectors system and yHA2x assay was investigated.
Of 146 patients with normal karyotype LOH was found in 30 cases. The potential LOH regions, were confirmed by microsatellite analysis of short tandem repeat (STR) markers. In 21 of these cases STR-analysis of T-cells, representing the corresponding tumor-free material, confirmed the regions of partial UPD. This aberration affected different chromosomes, but most commonly chr. 2, 6, 11, 21, 13, and 7, and covered between 11.5 and 88 Mb. Interestingly, in 6 LOH cases, long stretches of homozygosity present at the same positions as in the healthy cells and in the blasts were found. The impact of this phenomenon is unknown. Additionally, chromosome losses were detected in 3 patients classified with normal karyotype according to current methods. These 9 cases were not included in the UPD positive group.
No differences were observed regarding any clinical factors including age, WBC-counts and sex. The FAB M1 subtype was observed in 47.6% of the UPD positive patients, compared to only 19.2% of the UPD negative patients (P=0.04, n=146). In addition, no correlation between FLT3-ITD, MLL-PTD and NPM1 mutations in the UPD patients was found, but the data indicate that patients with UPD have a higher rate of treatment failure.
Moreover, in this study the relationship between UPD and gene aberrations was able to be confirmed. In some cases, UPD found on chromosomes 21, 19 and 11 was correlated with mutations in the RUNX1, CEBPA and WT genes, respectively. Furthermore, AML cases with and without UPD showed different but specific gene expression profiles, revealing different expression levels for genes involved in double strand break repairs.
Furthermore, it was found that different mutations could be responsible for the increase in efficiency of HR, such as FLT3-ITD or BCR-ABL. Moreover, cells with a FLT3-ITD mutation (without wt expression) rapidly increased the HR efficiency compared with heterozygous (FLT3-ITD/wt) cells. Preliminary results showed that the high repair efficiency was mainly dependent on the translocation of RAD51.
In conclusion, SNP array technology allow the identification and mapping of LOH in AML patients with normal karyotype. The obtained data also point out the necessity of analysing tumour-free material to confirm the somatic origin of the alteration. Furthermore, the available results indicate that compared to patients without UPD, patients with UPD have a higher relapse rate, which might be used as a prognostic marker in the future. Also, it could be hypothesized that downregulation of RAD51 (for example by FLT3 inhibition) might be beneficial DNA damage occurs through the genotoxic agent by reducing the relapse risk of AML.
|
9 |
THE DISTRIBUTION OF UNPAIRED DURING DROSOPHILA OOGENESISSexton, Travis 01 January 2009 (has links)
Janus Kinase (JAK) activity specifies the cell fates of the follicular epithelium during Drosophila oogenesis by establishing a gradient of JAK activity with highest levels at the A/P poles. Unpaired (Upd), a ligand for the pathway, is expressed and secreted exclusively from the polar cells potentially establishing the JAK activity gradient. This project proposed that Upd acts as a morphogen to directly establish the JAK activity gradient, specifying the fates of the follicular epithelium. The aims of this work were to investigate the extracellular distribution of Upd and, in addition, factors that may be involved. Furthermore, upd3, a gene encoding a protein with sequence similarity to Upd, is also co-expressed with upd in the polar cells. An additional aim of this project was to determine what role, if any, Upd3 plays in follicular development.
Immunostaining was used to reveal Upd distribution during oogenesis. The data revealed an Upd gradient on the apical membrane of the follicular epithelium. By virtue of the extracellular gradient, Upd fulfills the requirements necessary to be classified as a morphogen.
Some morphogens are dependent on heparan sulphate proteoglycans (HSPGs) for distribution. Using mitotic recombination to make mosaics, this work reveals that Dally, a glypican, is essential for the distribution of Upd and establishment of the JAK gradient during oogenesis. The data suggests Dally is involved with stability of extracellular Upd. Mosaic analysis of an additional HSPGs revealed that they are not essential for the Upd gradient or JAK activity during oogenesis.
upd3 mutant flies have small eyes and outstretched wings, a phenotype consistent reduced JAK activity. In upd3 mutant ovaries it is shown that there is a higher frequency of deteriorating egg chambers, a higher frequency of egg chamber fusions, and a decrease in border cells per egg chamber compared to wildtype controls; all of which support a reduction of JAK activity. Furthermore, ovarian phenotypes of upd3 get worse as the fly ages suggesting that upd3 is required over time. The data presented suggests that Upd3 does act to maintain JAK activity in the ovary as the fly ages.
|
10 |
Electrochemical detection of metals at gold ultramicroelectrodes with application to capillary electrophoresisNelson, Lana Johanne 15 August 2007
Electrochemical detection of metals can be done at polycrystalline gold ultramicroelectrodes using repetitive cyclic voltammetry (RCV), a detection method sharing some similarities with anodic stripping voltammetry (ASV). Each cycle of the potential waveform for RCV involves application of a negative preconcentration potential (for 50 to 300 ms) followed by a cyclic voltammetry (CV) scan at 20 to 1000 V/s. The response due to the metals is evident at potentials negative of the region for oxide formation in the resulting CVs. Metals are deposited at the Au surface by underpotential deposition (UPD) processes. Any metal that can be analyzed by RCV could potentially be quantified using UPD-ASV at Au (rather than by ASV at Hg).
The UPD kinetics of Pb and Cu at polycrystalline Au were examined by setting kinetic parameters (rate constant, symmetry factor, and electrosorption valency) within a simulation program used to generate simulated CVs. Reasonably good agreement between experimental and simulated CVs was possible using the simulation, with the same kinetic parameters used to generate simulated CVs to match experimental CVs over a range of sweep rates for each system. Using this method, the following rate constants (k) were estimated: for UPD of Cu in H2SO4 and HClO4, ks ~ 36000 s−1 and 11000 s−1, respectively, and for UPD of Pb in H2SO4, ks ~ 400000 s−1. <p> Repetitive cyclic voltammetry was applied to the detection of metals separated by capillary electrophoresis. Separation of Tl+, Cd2+, Cu2+, Pb2+, Zn2+, Ni2+, Co2+ and Mn2+ was demonstrated in 0.01 mol/L acetic acid and 0.01 mol/L ammonium acetate(pH ~ 4.6) using RCV. While stacking is commonly exploited for sensitivity enhancement during injection, it was shown that detection-end stacking is also useful.
A novel technique named electrophoretic extraction (EE) was developed for analysis of particle-containing solutions (e.g. soil extracts or other colloidal suspensions). EE involves application of backpressure during CE to prevent particles from entering the separation capillary: the applied pressure is regulated so analyte ions enter the capillary and migrate to the detector, whereas other particles are prevented from entering the capillary. The feasibility of this approach was demonstrated.
|
Page generated in 0.5504 seconds