L’objectif de ce travail de thèse est de caractériser, chez les amputés unilatéraux du membre inférieur, les modalités posturales qui interviennent dans la régulation de l’équilibre orthostatique et d’étudier l’impact de l’amputation sur la production de force à la cheville physiologique. Une première étude a révélé la présence de trois modalités posturales afin de réguler le contrôle postural : les amputés transfémoraux adoptent une modalité posturale basée sur les paramètres de stabilité, les amputés transtibiaux optent pour une modalité posturale mixte et les non amputés se réfèrent aux paramètres de l’attitude posturale. Etant donné que l’articulation de la cheville joue un rôle essentiel dans la régulation de l’équilibre postural, il était alors pertinent d’investiguer la production de force à la cheville physiologique. Toutefois, les ergomètres permettant d’étudier l’articulation de la cheville présentent des biais de mesure majeurs. Dans ce cadre, une deuxième étude a été menée afin de développer et valider un nouvel ergomètre pour cheville : le B.O.T.T.E. Parallèlement, la mise en place d’une méthode de mesure basée sur le retour visuel permettant une quantification fiable du couple de force a fait l’objet d’une troisième étude. Ensuite, une quatrième étude visait à utiliser le B.O.T.T.E. pour investiguer l’impact de l’amputation sur la production de force à la cheville physiologique. Les résultats de cette étude confirment la présence d’un déficit au niveau du couple de force généré en flexion plantaire (conditions maximale et sous maximale) chez les amputés transfémoraux. Enfin, ce travail de thèse vise à aider les rééducateurs et les cliniciens à optimiser la prise en charge des patients amputés. / This Ph.D. thesis aims to evaluate the standing posture modalities and the ankle joint torque in the intact limb in unilateral lower limb amputees. A first study shows the presence of three posture modalities: the non-amputee group relied on standing erect, the transfemoral amputees’ stance depended on balance control and the transtibial amputees exhibited a mixed modality of simultaneously maintaining an upright stance and standing balance. Since the ankle muscles have a functional importance in standing posture modalities, it is imperative to investigate the ankle joint torque in the intact limb. However, the current devices used to assess the ankle joint present substantial limitations for the measurement. Thus, a second study was designed to develop and to validate a new ankle ergometer B.O.T.T.E. Moreover, a third study was achieved in order to estimate the effect of visual feedback on enhancing isometric maximal voluntary contractions. A fourth study was realized to investigate the ankle joint torque in the intact leg of unilateral lower limb amputees. The results show that transfemoral amputees produce less torque and are less steady compared to transtibial amputees and able-bodied individuals. Overall, the present findings of this Ph.D. thesis could have implications for clinical practice and for rehabilitation of patients with a lower limb amputation.

Title: The evaluation of functional sitting stability of paraplegics Objectives: The aim of this work is to evaluate the functional stability of paraplegics sitting through tests. Another objective is to determine what is the effect of fourteen days rehabilitation intervention on the sitting patients. Methods: Designed experiment was processed by the form of quantitative research. There were 10 pacients with spinal cord injuries, especially paraplegics included - 5 men and 5 women. The history was detected with the main emphasis on assessment ASIA score. Measurement of unsupported upright sitting was done thanks to the Plantograf V09. It records the current pressure distribution and movement of the center of pressure (COP). Functional T - shirt test was evaluated by using a stopwatch. Probands responded two questions about their current condition after rehabilitation after the output measuring. The therapist rating was included in the results. All data were further processed in Microsoft Office Excel 2007. Results: Measurements confirmed the reliability of both used tests. The t-shirt test can be used as an objective method of assessing functional stability of sitting. Test of unsupported upright sitting measured by Plantografu is also usable. It would be appropriate to set the measuring apparatus...

Industrial steel storage racks are pre-engineered lightweight structures commonly used to store goods from supermarkets to big warehouses. These systems are framed structures, usually made of cold-formed steel profiles and characterised by non-standard details. Their performance is quite complex and the prediction of their global response is more difficult than for the traditional steel frames. This difficulty is due to the racks’ main features: the use of cold-formed thin-walled steel sections which are sensitive to different buckling modes, the presence of regular perforation patterns on the uprights, the highly non-linear behaviour of joints, the influence of the structural imperfections and the significant frame sensitivity to second order effects. The behaviour of racks becomes even more complex when seismic or accidental events induce significant horizontal forces acting on the structures. The complexity and variability that characterise racks make it difficult to identify general design solutions. Hence, racks design is traditionally carried out by using the “design by testing” approach, which requires the experimental characterisation of the main structural components, of the joints and the sub-assemblies. The complexity of the racks also affects their numerical modelling, which results in complex analyses that must take into account all the aforementioned features. The work presented in this thesis focuses on the study of a typical steel pallet rack, identified as case study. The research aims to contribute to building up a comprehensive knowledge of the response of both the main rack components and of the whole structure. The main rack components were first individually studied. The behaviour of the uprights, of the base-plate joints and of the beam-to-column joints was experimentally investigated. The experimental data were then taken as reference for the calibration of FE models that enabled exploring each component’s performance. These models were then incorporated into the whole rack model. The response of the uprights was first investigated through stub column tests. The non-negligible interaction between axial force and bending moment of the upright response was then experimentally and numerically analysed to define the M-N domains. In addition, the rules provided by different European standards for the design of isolated members subjected to combined axial load and bending moment were considered and critically compared, identifying the main critical issues of the different design approaches. Although the contribution of joints on the rack global response is of paramount importance, to date, the knowledge is quite limited. In particular, the experimental studies of the behaviour of base-plate joints are still rather modest, especially for the cyclic range. Therefore, an experimental campaign on the rack base-plate joints was carried out: three levels of axial load were considered and the response in both the down-aisle and the cross-aisle direction was investigated under monotonic and cyclic loadings. Similarly, the beam-to-column joint was tested both monotonically and cyclically, taking into account its non-symmetric behaviour. Numerical models for both joint types were developed and validated enabling the characterisation of joints in the monotonic and cyclic range. This in-depth knowledge of the response of individual components facilitated the evaluation of the global rack behaviour. As a final stage of the research, full-scale tests of four-level two-bay racks were performed taking advantage of an innovative full-scale testing set-up and, on the basis of the experimental outcomes, the racks’ global behaviour was numerically investigated. Critical standards issues and needs for future research were further identified.