O desempenho acústico em um veículo é fortemente dependente da interação fluido-estrutura entre o ar no habitáculo do veículo e a estrutura metálica. A maioria dos problemas de ruído e vibração relacionados a esta interação provem dos picos de ressonância da chapa metálica, quando excitada por forças externas (pista, motor, vento). A redução dos picos de ressonância pode ser obtida através da aplicação de placas asfálticas (\"Deadeners\") na estrutura. O problema está no posicionamento das placas, que usualmente é realizado experimentalmente por tentativa e erro. Este trabalho propõe o uso da sensibilidade inerente para o posicionamento de \"Deadeners\" em estruturas metálicas veiculares, em particular no teto do veículo. As funções de resposta em freqüência (FRFs) do teto são obtidas experimentalmente e processadas adotando a técnica da sensibilidade inerente, obtendo assim a sensibilidade dos picos de ressonância e identificando os locais passíveis de instalação de \"Deadeners\". Como resultado da análise, é possivel localizar a posição ótima para o \"Deadener\" que maximizará a redução de picos de resonância de interesse. Após o posicionamento dos \"Deadeners\", foi possível verificar a atenuação dos picos de ressonância no teto do veículo, mostrando a eficácia do método utilizado. A maior vantagem do método é que este requer apenas medições de resposta em frequência do sistema original, sem necessidade de modificações na estrutura do veículo para obter a sensibilidade do sistema a modificações. / The Noise Vibration and Harshness (NVH) performance of passenger vehicles strongly depends on the fluid-structure interaction between the air in the vehicle cavity and the sheet metal structure of the vehicle. Most of noise and vibration problems related to this interaction come from resonance peaks of the sheet metal, which are excited by external forces (road, engine, wind). A reduction of these resonance peaks can be achieved by applying deadeners in the sheet metal. The problem is where these deadeners shall be fixed, which is usually done in a trial-anderror basis. In this work, one proposes the use of embedded sensitivity to locate the deadeners in the sheet metal of the vehicle, more specifically in the vehicle roof. Experimental FRFs of the roof are obtained and data is processed by adopting the embedded sensitivity method, thus obtaining the sensitivity of the resonance peaks on the local increase of stiffness due to the deadeners. As a result, by examining the sensitivity functions, one can find the optimum location of the deadeners that maximize their effect in reducing the resonance peaks of interest. After locating the deadeners in the optimum positions, it was possible to verify a strong reduction in resonance peaks of the vehicle roof, thus showing the efficiency of the procedure. The main advantage of this procedure is that it only requires FRF measurements of the vehicle in its original state, not needing any previous modification of the vehicle structure to find the sensitivity functions.

O desempenho acústico em um veículo é fortemente dependente da interação fluido-estrutura entre o ar no habitáculo do veículo e a estrutura metálica. A maioria dos problemas de ruído e vibração relacionados a esta interação provem dos picos de ressonância da chapa metálica, quando excitada por forças externas (pista, motor, vento). A redução dos picos de ressonância pode ser obtida através da aplicação de placas asfálticas (\"Deadeners\") na estrutura. O problema está no posicionamento das placas, que usualmente é realizado experimentalmente por tentativa e erro. Este trabalho propõe o uso da sensibilidade inerente para o posicionamento de \"Deadeners\" em estruturas metálicas veiculares, em particular no teto do veículo. As funções de resposta em freqüência (FRFs) do teto são obtidas experimentalmente e processadas adotando a técnica da sensibilidade inerente, obtendo assim a sensibilidade dos picos de ressonância e identificando os locais passíveis de instalação de \"Deadeners\". Como resultado da análise, é possivel localizar a posição ótima para o \"Deadener\" que maximizará a redução de picos de resonância de interesse. Após o posicionamento dos \"Deadeners\", foi possível verificar a atenuação dos picos de ressonância no teto do veículo, mostrando a eficácia do método utilizado. A maior vantagem do método é que este requer apenas medições de resposta em frequência do sistema original, sem necessidade de modificações na estrutura do veículo para obter a sensibilidade do sistema a modificações. / The Noise Vibration and Harshness (NVH) performance of passenger vehicles strongly depends on the fluid-structure interaction between the air in the vehicle cavity and the sheet metal structure of the vehicle. Most of noise and vibration problems related to this interaction come from resonance peaks of the sheet metal, which are excited by external forces (road, engine, wind). A reduction of these resonance peaks can be achieved by applying deadeners in the sheet metal. The problem is where these deadeners shall be fixed, which is usually done in a trial-anderror basis. In this work, one proposes the use of embedded sensitivity to locate the deadeners in the sheet metal of the vehicle, more specifically in the vehicle roof. Experimental FRFs of the roof are obtained and data is processed by adopting the embedded sensitivity method, thus obtaining the sensitivity of the resonance peaks on the local increase of stiffness due to the deadeners. As a result, by examining the sensitivity functions, one can find the optimum location of the deadeners that maximize their effect in reducing the resonance peaks of interest. After locating the deadeners in the optimum positions, it was possible to verify a strong reduction in resonance peaks of the vehicle roof, thus showing the efficiency of the procedure. The main advantage of this procedure is that it only requires FRF measurements of the vehicle in its original state, not needing any previous modification of the vehicle structure to find the sensitivity functions.

The analysis of vehicle-structure interaction systems plays a significant role in the design and maintenance of bridges. In recent years, the assessment of the health of existing bridges and the design of new ones has gained significance, in part due to the progress made in the development of faster moving locomotives, the desire for lighter bridges, and the imposition of performance criteria against rare events such as occurrence of earthquakes and fire. A probabilistic analysis would address these issues, and also assist in determination of reliability and in estimating the remaining life of the structure. In this thesis, we aim to develop tools for the probabilistic analysis techniques of state estimation, parameter identification and global response sensitivity analysis of vehicle-structure interaction systems, which are also applicable to the broader class of structural dynamical systems. The thesis is composed of six chapters and three appendices. The contents of these chapters and the appendices are described in brief in the following paragraphs. In chapter 1, we introduce the problem of probabilistic analysis of vehicle-structure interactions. The introduction is organized in three parts, dealing separately with issues of forward problems, inverse problems, and global response sensitivity analysis. We begin with an overview of the modelling and analysis of vehicle-structure interaction systems, including the application of spatial substructuring and mesh partitioning schemes. Following this, we describe Bayesian techniques for state and parameter estimation for the general class of state-space models of dynamical systems, including the application of the Kalman filter and particle filters for state estimation, MCMC sampling based filters for parameter identification, and the extended Kalman filter, the unscented Kalman filter and the ensemble Kalman filter for the problem of combined state and parameter identification. In this context, we present the Rao-Blackwellization method which leads to variance reduction in particle filtering. Finally, we present the techniques of global response sensitivity analysis, including Sobol’s analysis and distance-based measures of sensitivity indices. We provide an outline and a review of literature on each of these topics. In our review of literature, we identify the difficulties encountered when adopting these tools to problems involving vehicle-structure interaction systems, and corresponding to these issues, we identify some open problems for research. These problems are addressed in chapters 2, 3, 4 and 5. In chapter 2, we study the application of finite element modelling, combined with numerical solutions of governing stochastic differential equations, to analyse instrumented nonlinear moving vehicle-structure systems. The focus of the chapter is on achieving computational efficiency by deploying, within a single modeling framework, three sub structuring schemes with different methodological moorings. The schemes considered include spatial substructuring schemes (involving free-interface coupling methods), a spatial mesh partitioning scheme for governing stochastic differential equations (involving the use of a predictor corrector method with implicit integration schemes for linear regions and explicit schemes for local nonlinear regions), and application of the Rao-Blackwellization scheme (which permits the use of Kalman’s filtering for linear substructures and Monte Carlo filters for nonlinear substructures). The main effort in this work is expended on combining these schemes with provisions for interfacing of the substructures by taking into account the relative motion of the vehicle and the supporting structure. The problem is formulated with reference to an archetypal beam and multi-degrees of freedom moving oscillator with spatially localized nonlinear characteristics. The study takes into account imperfections in mathematical modelling, guide way unevenness, and measurement noise. The numerical results demonstrate notable reduction in computational effort achieved on account of introduction of the substructuring schemes. In chapter 3, we address the issue of identification of system parameters of structural systems using dynamical measurement data. When Markov chain Monte Carlo (MCMC) samplers are used in problems of system parameter identification, one would face computational difficulties in dealing with large amount of measurement data and (or) low levels of measurement noise. Such exigencies are likely to occur in problems of parameter identification in dynamical systems when amount of vibratory measurement data and number of parameters to be identified could be large. In such cases, the posterior probability density function of the system parameters tends to have regions of narrow supports and a finite length MCMC chain is unlikely to cover pertinent regions. In this chapter, strategies are proposed based on modification of measurement equations and subsequent corrections, to alleviate this difficulty. This involves artificial enhancement of measurement noise, assimilation of transformed packets of measurements, and a global iteration strategy to improve the choice of prior models. Illustrative examples include a laboratory study on a beam-moving trolley system. In chapter 4, we consider the combined estimation of the system states and parameters of vehicle-structure interaction systems. To this end, we formulate a framework which uses MCMC sampling for parameter estimation and particle filtering for state estimation. In chapters 2 and 3, we described the computational issues faced when adopting these techniques individually. When used together, we come across both sets of issues, and find the complexity of the estimation problem is greatly increased. In this chapter, we address the computational issues by adopting the sub structuring techniques proposed in chapter 2, and the parameter identification method based on modified measurement models presented in chapter 3. The proposed method is illustrated on a computational study on a beam-moving oscillator system with localized nonlinearities, as well as on a laboratory study on a beam-moving trolley system. In chapter 5, we present global response sensitivity indices for structural dynamical systems with random system parameters excited by multiple random excitations. Two new procedures for evaluating global response sensitivity measures with respect to the excitation components are proposed. The first procedure is valid for stationary response of linear systems under stationary random excitations and is based on the notion of Hellinger’s metric of distance between two power spectral density functions. The second procedure is more generally valid and is based on the l2 norm based distance measure between two probability density functions. Specific cases which admit exact solutions are presented and solution procedures based on Monte Carlo simulations for more general class of problems are outlined. The applicability of the proposed procedures to the case of random system parameters is demonstrated using suitable illustrations. Illustrations include studies on a parametrically excited linear system and a nonlinear random vibration problem involving moving oscillator-beam system that considers excitations due to random support motions and guide-way unevenness. In chapter 6 we summarize the contributions made in chapters 2, 3, 4, and 5, and on the basis of these studies, present a few problems for future research. In addition to these chapters, three appendices are included in this thesis. Appendices A and B correspond to chapter 3. In appendix A, we study the effect on the nature of the posterior probability density functions of large measurement data set and small measurement noise. Appendix B illustrates the MCMC sampling based parameter estimation procedure of chapter 3 using a laboratory study on a bending–torsion coupled, geometrically non-linear building frame under earthquake support motion. In appendix C, we present Ito-Taylor time discretization schemes for stochastic delay differential equations found in chapter 5.

O trabalho tem por objetivo desenvolver um veículo com massa inferior a 500 kg e que atenda aos requisitos estruturais e biomecânicos conforme regulamentações das Nações Unidas referentes a segurança dos ocupantes, para tal serão aplicadas metodologias de otimização usando metamodelos, que são modelos substitutos aos modelos em elementos finitos. O trabalho apresenta o desenvolvimento de um veículo completo para dois ocupantes, o mesmo é conceitual pois é mais curto e estreito se comparado a um veículo convencional, propiciando a redução do espaço ocupado em centros urbanos. Por meio de simulação numérica computacional será avaliada a capacidade da estrutura em proteger os ocupantes, bem como serão utilizados manequins virtuais para obter as respostas do corpo humano aos diferentes eventos de colisão veicular. São apresentadas técnicas para criação dos metamodelos e definida a melhor aproximação que foi aplicada no processo otimização da estrutura do veículo, objetivando atingir a menor massa possível. Além disto, o veículo precisa cumprir aos requisitos de proteção dos ocupantes em casos de impacto frontal, lateral e traseiro. Também serão avaliadas as respostas biomecânicas dos ocupantes, respostas do corpo humano a forças internas e externas, em impactos veiculares não regulamentados pelas Nações Unidas, mas são procedimentos de teste empregados para avaliar e comparar os resultados entre diferentes veículos. O estudo é inovador pois na formulação dos problemas de otimização são utilizadas funções objetivo e restrições tanto estruturais quanto biomecânicas. O veículo projetado servirá de base para o desenvolvimento de futuros estudos em diferentes áreas e disciplinas da Universidade, podendo ser utilizado na definição, aplicação e validação de novos conceitos. Finalmente, por meio da otimização numérica computacional baseada em metamodelos, demonstra-se que o veículo pode ser melhorado, satisfazendo os requisitos estabelecido e promovendo redução no tempo e no custo de desenvolvimento de um novo veículo. / The work aims to develop a vehicle with mass less than 500 kg and it meets the structural and biomechanical requirements according to the United Nations regulations regarding the occupant protection. To achieve these goals will be applied optimization processes based on metamodels that are surrogate models for finite elements models. The work presents the development of a conceptual full vehicle for two occupants, it is shorter and narrower compared to a conventional vehicle, allowing the reduction of occupied space in urban centers. Through computational numerical simulation will evaluate the ability of the structure to protect the occupants and will be used virtual mannequins to assess the human body responses to different types of vehicular collisions. Techniques to create metamodels will be presented and setting the best approximation that was applied to the optimization process of the vehicle structure with the objective to obtain the lowest possible mass. Furthermore, the vehicle must meet the occupants\' protection requirements in events of frontal, lateral and rear impact. Also, it will be evaluated the occupants\' biomechanical responses in case of vehicular impacts not regulated by United Nations. However, these test procedures are applied to assess and comparing results among different vehicles. The study herein developed presents significant contributions since in the optimization problems are used both structural and biomechanical responses as objective and constraint functions. The vehicle designed will be a basis for the development of future studies in different areas and disciplines of the University. It will be used in the definition, implementation and validation of new concepts. Finally, it is shown that the application of numerical optimization based on metamodels is an effective process to improve the vehicle performance by meeting the requirements and promoting a reduction in time and cost of developing.

O trabalho tem por objetivo desenvolver um veículo com massa inferior a 500 kg e que atenda aos requisitos estruturais e biomecânicos conforme regulamentações das Nações Unidas referentes a segurança dos ocupantes, para tal serão aplicadas metodologias de otimização usando metamodelos, que são modelos substitutos aos modelos em elementos finitos. O trabalho apresenta o desenvolvimento de um veículo completo para dois ocupantes, o mesmo é conceitual pois é mais curto e estreito se comparado a um veículo convencional, propiciando a redução do espaço ocupado em centros urbanos. Por meio de simulação numérica computacional será avaliada a capacidade da estrutura em proteger os ocupantes, bem como serão utilizados manequins virtuais para obter as respostas do corpo humano aos diferentes eventos de colisão veicular. São apresentadas técnicas para criação dos metamodelos e definida a melhor aproximação que foi aplicada no processo otimização da estrutura do veículo, objetivando atingir a menor massa possível. Além disto, o veículo precisa cumprir aos requisitos de proteção dos ocupantes em casos de impacto frontal, lateral e traseiro. Também serão avaliadas as respostas biomecânicas dos ocupantes, respostas do corpo humano a forças internas e externas, em impactos veiculares não regulamentados pelas Nações Unidas, mas são procedimentos de teste empregados para avaliar e comparar os resultados entre diferentes veículos. O estudo é inovador pois na formulação dos problemas de otimização são utilizadas funções objetivo e restrições tanto estruturais quanto biomecânicas. O veículo projetado servirá de base para o desenvolvimento de futuros estudos em diferentes áreas e disciplinas da Universidade, podendo ser utilizado na definição, aplicação e validação de novos conceitos. Finalmente, por meio da otimização numérica computacional baseada em metamodelos, demonstra-se que o veículo pode ser melhorado, satisfazendo os requisitos estabelecido e promovendo redução no tempo e no custo de desenvolvimento de um novo veículo. / The work aims to develop a vehicle with mass less than 500 kg and it meets the structural and biomechanical requirements according to the United Nations regulations regarding the occupant protection. To achieve these goals will be applied optimization processes based on metamodels that are surrogate models for finite elements models. The work presents the development of a conceptual full vehicle for two occupants, it is shorter and narrower compared to a conventional vehicle, allowing the reduction of occupied space in urban centers. Through computational numerical simulation will evaluate the ability of the structure to protect the occupants and will be used virtual mannequins to assess the human body responses to different types of vehicular collisions. Techniques to create metamodels will be presented and setting the best approximation that was applied to the optimization process of the vehicle structure with the objective to obtain the lowest possible mass. Furthermore, the vehicle must meet the occupants\' protection requirements in events of frontal, lateral and rear impact. Also, it will be evaluated the occupants\' biomechanical responses in case of vehicular impacts not regulated by United Nations. However, these test procedures are applied to assess and comparing results among different vehicles. The study herein developed presents significant contributions since in the optimization problems are used both structural and biomechanical responses as objective and constraint functions. The vehicle designed will be a basis for the development of future studies in different areas and disciplines of the University. It will be used in the definition, implementation and validation of new concepts. Finally, it is shown that the application of numerical optimization based on metamodels is an effective process to improve the vehicle performance by meeting the requirements and promoting a reduction in time and cost of developing.