This thesis provides an investigation into the structural behaviour of cold-formed steel zed- and channel-section purlins when subjected to uplift loading in purlin-sheeting systems. In pre-buckling, an analytical model is presented to describe the bending and twisting behaviour of partially restrained zed- and channel-section purlins when subjected to uplift loading. Formulae used to calculate the bending stresses of the roof purlins are derived by using the classical bending theory of thin-walled beams. Detailed comparisons are made between the present model and the simplified model proposed in Eurocode EN1993-1-3. In buckling, a numerical investigation is presented on the buckling behaviour of partially restrained cold formed steel zed- and channel-section purlins when subject to transverse distributed uplift loading. The buckling behaviour of zed- and channel-section purlins of different dimensions subjected to uplift loading under the influence of rotational spring stiffness applied on the middle line of the upper flange is examined. In the post-buckling, nonlinear finite element analysis models are created for the partially restrained cold-formed steel zed- and channel-section purlins subjected to transverse uniformly distributed uplift loading. The analyses are performed by considering both geometric and material nonlinearities, and corresponding design curves of zed- and channel-section purlins are established.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:575576 |
| Date | January 2013 |
| Creators | Ren, Chong |
| Publisher | University of Birmingham |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://etheses.bham.ac.uk//id/eprint/4231/ |
Page generated in 0.0113 seconds