Return to search

Endurecimento por precipita??o em fun??o das condi??es de solidifica??o em ligas leves de Al-Zn-Mg com varia??es no teor de zinco

Submitted by PPG Engenharia e Tecnologia de Materiais (engenharia.pg.materiais@pucrs.br) on 2017-10-10T12:03:59Z
No. of bitstreams: 1
Tese_Bernardo_2017_R18_3_Versao_PGETEMA.pdf: 6957919 bytes, checksum: e8811a19bda3fe37ea9ed6f6247594ac (MD5) / Approved for entry into archive by Caroline Xavier (caroline.xavier@pucrs.br) on 2017-10-10T13:43:30Z (GMT) No. of bitstreams: 1
Tese_Bernardo_2017_R18_3_Versao_PGETEMA.pdf: 6957919 bytes, checksum: e8811a19bda3fe37ea9ed6f6247594ac (MD5) / Made available in DSpace on 2017-10-10T13:48:22Z (GMT). No. of bitstreams: 1
Tese_Bernardo_2017_R18_3_Versao_PGETEMA.pdf: 6957919 bytes, checksum: e8811a19bda3fe37ea9ed6f6247594ac (MD5)
Previous issue date: 2017-08-31 / CAPES/PROSUP / The objective of the present work is to develop two modified ternary Al-Zn-Mg alloys, with Zn content about 5wt% and 8wt%, and to evaluate the precipitation hardening (solutioning and artificial ageing ? T6) as a function of solidification conditions. The 752 (Al-5%Zn-2%Mg) and 782 (Al-8%Zn-2%Mg) alloys were obtained to analyze the influence of Zn content, as well as the relationship between solidification conditions, precipitation hardening, and mechanical properties before and after heat treatments. Unidirectional vertical upward solidification was performed in a metallic mold cooled by water in the bottom and instrumented using thermocouples to obtain the ingots. Samples extracted from ingots were metallography characterized by optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and the mechanical properties were determined by hardness, microhardness, tensile and wear testing. The results showed that the increase of 3% of zinc in the chemical composition improved the hardness of 44%, the superficial wear of 27.7% and the tensile strength of 31.5% (in T6 condition). When comparing the results against data from some similar wrought alloys, it is concluded that the as-cast and heat treated 782 alloy can replace those, according to design specifications. / O objetivo do presente trabalho foi desenvolver duas ligas tern?rias fundidas modificadas de Al-Zn-Mg, com varia??o de 5% e 8% em Zn (em massa), e investigar o endurecimento por precipita??o (solubiliza??o e envelhecimento artificial - T6) em fun??o das condi??es de solidifica??o. Foram produzidas as ligas 752 (Al-5%Zn-2%Mg) e 782 (Al-8%Zn-2%Mg) para analisar, al?m da influ?ncia do teor de zinco, a correla??o entre as condi??es de solidifica??o, o endurecimento por precipita??o e as propriedades mec?nicas iniciais e finais. Para obten??o dos lingotes, a solidifica??o unidirecional vertical ascendente foi realizada em molde met?lico resfriado com ?gua na base e instrumentado com termopares. Amostras foram caracterizadas por an?lises metalogr?ficas em microscopia ?ptica (MO), microscopia eletr?nica de varredura (MEV), espectroscopia de energia dispersiva (EDS), e ensaios mec?nicos para determina??o das propriedades mec?nicas como dureza, microdureza, tra??o e desgaste, antes e ap?s os tratamentos t?rmicos. Os resultados mostraram que o aumento em 3% de zinco na composi??o qu?mica melhorou a dureza em 44,4%, o desgaste superficial em 27,7% e a resist?ncia ? tra??o em 31,5% (em condi??o T6). Comparando estes resultados com dados de algumas ligas conformadas similares, conclui-se que a Liga 782, fundida e tratada termicamente, pode substituir as ligas conformadas comerciais com adi??o de cobre.

Identiferoai:union.ndltd.org:IBICT/oai:tede2.pucrs.br:tede/7690
Date31 August 2017
CreatorsReis, Bernardo P?ras
ContributorsSantos, Carlos Alexandre dos
PublisherPontif?cia Universidade Cat?lica do Rio Grande do Sul, Programa de P?s-Gradua??o em Engenharia e Tecnologia de Materiais, PUCRS, Brasil, Faculdade de Engenharia
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/doctoralThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da PUC_RS, instname:Pontifícia Universidade Católica do Rio Grande do Sul, instacron:PUC_RS
Rightsinfo:eu-repo/semantics/openAccess
Relation-7432719344215120122, 600, 500, 500, -655770572761439785, 4518971056484826825

Page generated in 0.0021 seconds