Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Architecture, 2004. / Includes bibliographical references (p. 110-115). / (cont.) may still be solved as an unconstrained linear least squares problem. To enforce the constraint on system eigenvalues, the problem is formulated as an unconstrained mixed (linear and non-linear) least-squares problem, which is easier to solve than the corresponding problem with linear objective function and non-linear constraints. The (usually unfounded) assumption on which the normal equations are based--that observations of the independent variables are error free--is relaxed at the cost of one more non-linear term. The resulting model coefficients are valid for predicting heat rate given zone temperature as well as for predicting zone temperature given heat rate. Control. Three important control applications involving transient zone thermal response are HVAC curtailment, optimal start, and night precooling. A general framework for model-based control of zone and whole-building operation is developed. Optimal precooling under time-of-use rates is formulated to solve the optimal fan operation sequence using a one-day control horizon with hourly time steps. Energy and demand cost savings are presented. / Motivated by the high speed of real-time data acquisition, computational power, and low cost of generic PCs and embedded-PCs running Linux, this thesis addresses new methods and approaches to fault detection, model identification, and control. Fault detection: A series of faults was introduced into a 3-Ton roof-top air-conditioning unit (RTU). Supply and condenser fan imbalance were detected by changes in amplitude spectrum of real power resulting from the interaction of impeller rotation and the dominant chassis vibration mode. Ingestion of liquid refrigerant by the compressor was identified by detecting power and reactive power transients during compressor starts. An adaptive ARX(5) model was used to detect ingestion during steady compressor operation. Compressor valve or seal leakage were detected by a change in the leakage parameter of a simple evaporator-compressor-condenser model that explains the rise in compressor load from 0.25 to .5 seconds after compressor start, i.e. as shaft speed rises from about 50% to 90% of synchronous speed. Refrigerant undercharge was also detected by changes in start transient shape. Overcharge was detected by steady state compressor power and reduced evaporator and condenser air flow were detected by steady state power draw of the respective fan motors. Model Identification. On-line models are useful for control as well as fault detection. Model-based control of building loads requires a valid plant model and identification of such a model for a specific building or zone is a non-trivial inverse problem. The thesis develops three advances in the thermal diffusion inverse problem. Two involve thermodynamic constraints. The problem is first reformulated in such a way that the constraint on temperature / by Peter Ross Armstrong. / Ph.D.
| Identifer | oai:union.ndltd.org:MIT/oai:dspace.mit.edu:1721.1/28805 |
| Date | January 2004 |
| Creators | Armstrong, Peter Ross, 1950- |
| Contributors | Leslie K. Norford and Steven B. Leeb., Massachusetts Institute of Technology. Dept. of Architecture., Massachusetts Institute of Technology. Dept. of Architecture. |
| Publisher | Massachusetts Institute of Technology |
| Source Sets | M.I.T. Theses and Dissertation |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
| Format | 142 p., 10876396 bytes, 10894980 bytes, application/pdf, application/pdf, application/pdf |
| Rights | M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission., http://dspace.mit.edu/handle/1721.1/7582 |
Page generated in 0.0071 seconds