This diploma thesis studies the structure of selected austenitic stainless steels which were fatigued at room and depressed temperatures. The theoretical part is divided into three parts. The first one defines the austenitic stainless steels with accent to their chemical composition and microstructure. Second part is dedicated to deformation-induced martensite formation. The third part shows the mechanisms and stages of damage due to cyclic straining. The experimental part is focused especially on the observing of microstructural changes by methods of colour metallography and their relation to stress-strain response of material under selected conditions of fatigue loading. Series of samples of 304 and 316L steels were prepared by colour etching and their microstructures were documented using optical microscopy. Then the semi-quantitative measurements of presence and morphology of deformation-induced martensite were done and the results were discussed and correlated with fatigue damage level.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231382 |
| Date | January 2014 |
| Creators | Kudelka, Martin |
| Contributors | Válka, Libor, Pantělejev, Libor |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0024 seconds