This Master's Thesis is focused on the design and control of a small-series production line, for the production of segmetal arches and plastic reductions. It is about the conversion from a semi-automatic line to a fully automatic line. The production line consists of an extruder, a cutting unit, a exhaust unit, three pressing machines and a manipulator. Every single machine has a custom control for which was selected a baseplate with microcontroler ATmega 128 and designed powerful part of inputs and outputs. There is a simple communication between the machines. Appropriate elements were used for conversion of every individual part of the production line. The whole system is programmed with software called AVR Studio4.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:254460 |
| Date | January 2016 |
| Creators | Šíl, Petr |
| Contributors | Vdoleček, František, Zuth, Daniel |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds