Tyrolean type water-intake structures are widely used on mountain rivers to provide water to hydropower stations. The main concern encountered in these kinds of structures is the amount of water diverted from the main channel and sediment carried by this flow. The diverted flow should not be less than the design discharge of the hydropower station and the amount of the sediment entering the hydraulic system should be minimum. In this study a physical model of a Tyrolean weir was constructed at the Hydromechanics Laboratory and by varying the dimensions of the various components of this system / the length, the inclination angle of the rack and the distance between the rack bars, the amount of water and sediment entering the system were measured for a wide range of discharges. The experiments were conducted in two stages. In the first stage the tests were made with only water, and in the second stage, water and sediment having different gradation were used.
Applying dimensional analysis to the related parameters of the system dimensionless terms were defined for water capture efficiency and discharge coefficient of the system, and their variations with the relevant parameters were plotted. Using these diagrams one can determine the amount of water to be diverted by a Tyrolean weir of known geometry and main channel flow.
Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12612780/index.pdf |
Date | 01 December 2010 |
Creators | Yilmaz, Aslican Nazli |
Contributors | Gogus, Mustafa |
Publisher | METU |
Source Sets | Middle East Technical Univ. |
Language | English |
Detected Language | English |
Type | M.S. Thesis |
Format | text/pdf |
Rights | To liberate the content for public access |
Page generated in 0.2646 seconds