Return to search

An Investigation into Bromate Formation in Ozone Disinfection Systems

Ozonation is used as an alternative disinfection process to chlorination but unfortunately has a potential of oxidizing bromide, a natural component of water sources, to bromate. Bromate is a possible carcinogen with a maximum contaminant level of 10 ppb. To understand bromate formation in full-scale systems, a comprehensive study was conducted at the Moorhead Water Treatment Plant (WTP). Bromide concentrations in source waters were monitored. Water samples from locations in the ozonation chambers were collected and analyzed for bromate and other parameters. Results showed that bromate formation was increased through increases in pH, bromide, and ozone dose during high temperatures and was decreased by increases in organics. The impact of the bromate influential parameters was minimized at low temperatures. To assist Moorhead WTP on developing bromate control strategies, a modeling approach was adopted to predict bromate formation at various operational conditions using temperature, pH, ozone dose, bromide, and TOC. / MWH Global, AWWA Scholarship / American Water Works Association (AWWA), Minnesota and North Dakota sections / North Dakota Water Resources Research Institute / Department of Civil Engineering, North Dakota State University

Identiferoai:union.ndltd.org:ndsu.edu/oai:library.ndsu.edu:10365/26896
Date January 2013
CreatorsStorlie, Leslee
PublisherNorth Dakota State University
Source SetsNorth Dakota State University
Detected LanguageEnglish
Typetext/thesis
Formatapplication/pdf
RightsNDSU Policy 190.6.2, https://www.ndsu.edu/fileadmin/policy/190.pdf

Page generated in 0.0019 seconds