The main goal of the master thesis is an evaluation of a software package Smap 3D Plant Design in design of evaporation technology, specifically 3D of the pipeline network and its subsequent documentation. The thesis describes evaporation technology in general, then the evaporator testing site in Laboratory of Energy Intensive Processes in NETME Centre is presented, where pipeline network needs to be designed. In the next part a reference 3D model was created as well as a documentation using SolidWorks routing. Subsequently, an equivalent 3D model was created using Smap 3D Plant Design – Piping and a documentation was created using Smap 3D Plant Design – Isometric. Finally, these two methods of creating pipeline were compared to each other, and recommended method was chosen.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:443154 |
| Date | January 2021 |
| Creators | Odstrčil, Marek |
| Contributors | Naď, Martin, Vondra, Marek |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds