My diploma thesis deals about the one possibility of distortion measuring in TV devices and distributions. The main objectives are analysis of special measuring signals sin220T and sin22T, means of precision assesments and design possibilities. Next point is proposal and after that draft of generator circuit. It will consist analog a digital section of processing measuring signals. Pulse sin22T is generated by digital decoder CPLD, trigged by “hardware” quartz oscilator 60MHz. Low-frequency component of signal sin220T have identical form like sin22T, diference is only in clocking by 10MHz assured by “software”frequency divider. High-frequency component of pulse is gained like product of AM modulation, that the modulation signal is low-frequency sin220T and harmonic carrier with frequency 4,433619MHz. Ocilator with automatic gain control (AGC) and quartz feed-back generates absolute accuracy oscillation (precision 10-6). Finaly this parts are summing in operation amplifier. Detailed analysis, draft and layout of PCB (Printed Circuid Board) is reffered – to diploma thesis.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:217665 |
| Date | January 2008 |
| Creators | Mazánek, David |
| Contributors | Slanina, Martin, Říčný, Václav |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0025 seconds