Thesis (PhD)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: Conventional, advanced and fractionation pretreatment technologies were employed
to recover and/or enhance the efficacy of the main constituents present in lignocellulosic
biomass. Bamboo and triticale bran are novel feedstocks and hence their response towards
treatment is unknown. Thus, to assist with the characterisation of these feedstock, in terms of
the amount of sugar released during acid and enzymatic hydrolysis, use were made of
conventional pretreatment technologies. Pretreatment involved the use of either the
conventional single-stage dilute-acid or the conventional acid-catalysed steam-explosion
process at times, temperatures and acid concentration ranging between 5 to 40 min, 120 to
214°C, and 0.002 to 0.055 (H3O+) gmol/L, respectively. For additional comparison, results
were also obtained from an established feedstock namely sugarcane bagasse, by subjecting it
to the single-stage dilute-acid process, at similar pretreatment conditions employed during the
treatment of the other feedstocks. Sugarcane bagasse and bamboo, upon pretreatment and
enzymatic hydrolysis, both yielded a similar combined sugar recovery yield of 78.0% and
81.2%, respectively. Alternatively, only 55.3% (w/w) of the total sugar content in triticale
bran could be recovered. Triticale bran consists predominantly of hemicellulose which,
compared to cellulose, the main constituent in sugarcane bagasse and bamboo, is more
susceptible to degradation. Thus, to enhance the combined sugar recovery yield, it is
recommended that triticale bran be treated at less severe pretreatment conditions, in order to
preserve the hemicellulose. To further enhance the amount of sugar (i.e. cellulose and hemicellulose) that can be
recovered from sugarcane bagasse, the use of a two- rather than one-stage dilute acid process
was proposed. The single-stage dilute acid process, despite being the subject of many
research efforts, failed to recover more than 83% (w/w) of the total sugar content in
sugarcane bagasse. Following an extensive literature study, it was concluded that sugarcane
bagasse comprises a hemicellulose and cellulose fraction which dictates the use of different
pretreatment conditions in order to ensure their effective recovery. The use of a more advance
two-step dilute acid process was therefore proposed as it allows for multiple-sets of
pretreatment conditions which accommodate the requirements set forth by each of the
polysaccharides present in sugarcane bagasse. With the assistance of response surface
methodology, a 4.8% (w/w) improvement over the single-stage method was calculated for the
two-stage process, by assuming both pretreatment technologies operated at optimum pretreatment conditions. This improvement, which is similar to the 7.7% (w/w) obtained with
substrates other than sugarcane bagasse, was accredited to the use of multiple-sets of
pretreatment conditions. Both low and high severity pretreatment conditions were applied to
maximise the recovery of hemicellulose and cellulose, respectively. In the case of bamboo
however, little can be gained by using the two- in lieu of the one-stage method, as similar
pretreatment conditions are required to maximise both hemicellulose and cellulose recovery.
Alternatively, a three- rather than a two-stage process needs to be applied, when treating
triticale bran, to accommodate for an additional set of pretreatment conditions required to
recover arabinan, a third polysaccharide.
In order to realise the full potential of sugarcane bagasse, use was made of a
fractionation method, which in addition to the recovery of polysaccharide (i.e. cellulose and
hemicellulose), also allowed for the recovery of the polyphenolic content (i.e. lignin) thereof.
Limited by the complexity of the fractionation process, sugarcane bagasse was selected as the
preferred substrate to be subjected to fractionation, mainly because of its availability in the
South African (established sugar milling industry), and ease of treatment using both
conventional (e.g. single-stage) and advanced (e.g. two-stage) pretreatment technologies. A
novel fractionation technology, involving the use of the ionic liquid 1-butyl-3-
mehylimidazolium methyl sulphate ([BMiM]MeSO4), was devised to separate the main constituents of sugarcane bagasse. Although other ionic liquid fractionation examples also
exist in literature, processes used caused production of multi-component product streams with
34% (w/w) of the original lignin and hemicellulose being recovered in the same product
stream. Tests conducted during the present study confirmed these results and further
indicated that the production of multi-constituent product streams could not be avoided by
using acetone, an acetone-water mixture or a sodium hydroxide solution as the solvent in a
subsequent solvent extraction step. Hence, to avoid the production of multi-component
product streams, a hemicellulose pre-extraction step, comprising the single-stage dilute acid
process, was introduced to extract and recover 75% (w/w) of the hemicellulose content. The
remaining solid was subjected to ionic liquid treatment whereafter it was effectively
separated into cellulose and lignin enriched product streams through solvent extraction. Up to
73% (w/w) of the original lignin and cellulose content was recovered using optimum
operating conditions (120 min; 125°C). Comparison of the novel ionic liquid
([BMiM]MeSO4) with 1-ethyl-3-methylimidazolium acetate, an established ionic liquid, identified the former to be the superior delignification solvent whereas the latter contributed
more towards the digestibility of the residual solids.
In conclusion, methods for the effective recovery of polysaccharides and polyphenol
units from established (i.e. sugarcane bagasse) and novel (i.e. bamboo, triticale bran)
lignocellulosic feedstocks have been demonstrated through the application of conventional
(single-stage), advanced (two-stage) and fractionation pretreatment technologies. Economic
improvement is promised through the application of these constituents as they may serve as
precursor chemicals for the production of value-added products that may replace the fuel and
chemicals currently derived from fossil carbon resources. / AFRIKAANSE OPSOMMING: Konvensionele, gevorderde en fraksionering voorafbehandeling tegnologieë is
gebruik om die herwinning en gebruiksaamheid van die hoofbestanddele wat in
lignosellulose biomassa aanwesig is, te verbeter. Bamboes en tritikale semels is nuwe rou
materiale en dus is hul reaksie op behandeling onbekend. Ten einde die karaktereienskappe
van hierdie rou materiale, in terme van die hoeveelheid suiker wat gedurende die suur- en
suiker ensimatiese-hidrolise vrygestel word, te bepaal, is gebruik gemaak van konvensionele
voorbehandeling tegnologieë. Voorbehandeling behels die gebruik van óf die konvensionele
enkelstadium vedunde-suur óf die konvensionele suur-gekataliseerde stoomontploffingsproses;
by tye, temperature en suurladings wat wissel tusen 5 en 40 minute, 120
tot 214°C, en 0.002 tot 0.055 (H3O+)gmol/L, onderskeidelik. Vir verdere vergelykings is
resultate vanaf ’n gevestigde rou materiaal, naamlik suikerriet reste, verkry, deur dit te
onderwerp aan ’n enkelstadium verdunde suur proses met dieselfde voorbehandeling
toestande wat gegeld het gedurende die behandeling van die ander roumateriale. Tydens
voorbehandeling en ensimaties-hidrolise het suikerriet reste en bamboes ’n gelyke
gekombineerde terugwinnings opbrengs van 78.0% en 81.2% suiker, onderskeidelik, gelewer.
Daar kon egter net 55.3% (w/w) van die totale suikerinhoud van tritikale semels herwin word. Tritikale semels bestaan hoofsaaklik uit hemisellulose, wat meer vatbaar is vir degradasie ten
opsigte van sellulose, die hoof bestanddeel van suikerriet reste en bamboes. Om dus die
gekombineerde suikerherwinnings-opbrengs te verbeter, word daar voorgestel dat tritikale
semels aan minder strawwe toestande onderwerp word, om sodoende die hemisellulose te
bewaar.
Om verder die hoeveelheid suiker (d.w.s glukose en xilose) wat vanuit suikerriet reste
herwin kan word, te verbeter, is die gebruik van ’n twee- in plaas van ’n eenstadium verdunde
suur proses, voorgestel. Die enkelstadium verdunde suur proses het, ten spyte daarvan dat dit
al die onderwerp van verskillende navorsing projekte was, nie daarin geslaag om meer as
83% (w/w) van die totale suikerinhoud vanuit die suikerriet reste te herwin nie. Na ’n
uitgebreide literatuurstudie is daar tot die slotsom gekom dat suikerriet reste bestaan uit ’n
hemisellulose deel en ’n sellulose deel wat die gebruik van verskillende voorbehandeling
toestande noodsaak, om sodoende effektiewe herwinning daarvan te verseker. Die
aanwending van ’n meer gevorderde twee-stap verdunde suur proses is dus voorgestel,
aangesien dit van veelvoudige-stelle voorbehandelings toestande, soos vereis deur die polisakkariedes in suikerriet reste, gebruik maak. Deur die toepassing van reaksie oppervlakte
metodologie, is ’n 4.2% verbetering op die enkel-stadium metode vir die twee-stadium proses
behaal deur aan te neem dat beide van hierdie prosesse, by optimum kondisies vir maksimale
suiker herwinning, uitgevoer is. Hierdie verbetering is soortgelyk aan die 7.7% (w/w)
verbetering wat voorheen met andersoortige substrate (uitgesonder suikerriet reste) verkry is.
Sodanige verhoging word toegeskryf aan die gebruik van veelvoudige stelle van
voorbehandeling toestande, wat beide meer en minder strawwe toestande insluit, om
sodoende die herwinning van xilose en glukose onderskeidelik te maksimeer. In die geval van
bamboes, is die twee-stadium metode nie superieur tot die een-stadium metode nie, aangesien
soortgelyke voorbehandeling-toestande benodig word om beide die herwinning van xilose en
glukose te maksimeer. Alternatiewelik moet ’n drie-stadium in plaas van ’n twee-stadium
proses gebruik word wanneer tritikale semels behandel word aangesien ’n bykomende stel
voorbehandeling toestande benodig word om arabinan, ’n derde polisakkaried, te herwin. Om sodoende die volle potensiaal van suikerriet reste te ontgin, is gebruik gemaak
van ʼn fraksioneringstegnologie. Waar konvensionele voorbehandeling metodes slegs fokus
op die herwinning van polisakkariedes (naamlik sellulose en hemisellulose), kan die
fraksioneringsproses ook die poli-fenoliese inhoud (naamlik lignien) in lignosellulose,
herwin. Weens die ingewikkeldheid van die fraksioneringsproses, is suikerriet reste gekies as
die mees geskikte substraat vir fraksionering, hoofsaaklik omdat dit veral in die Suid-
Afrikaanse konteks, maklik beskikbaar is en omdat dit ook maklik is om met beide die
konvensionele (bv. die enkel-stadium) en die gevorderde (bv. die twee-stadium)
voorbehandeling proses behandel te word. ʼn Nuut ontwikkelde fraksionering tegnologie wat
gebruik maak van die ioniese vloeistof 1-butiel-3-metielimidazolium metielsulfaat
([BMiM]MeSO4) is ontwikkel, om die hoofbestanddele in suikerriet reste van mekaar te skei.
Literatuur bevat verskeie voorbeelde waar ioniese vloeistowe gebruik word vir fraksionering.
Die doeltreffendheid van hierdie prosesse is egter deur die produksie van multi-komponent
produkstrome, waartydens tot en met ekwivalente hoeveelhede hemisellulose en lignien in
dieselfde produkstrome herwin is, beperk. Hierdie resultate is tydens die studie deur middel
van toetse bevestig. Sodanige toetse het ook aangedui dat die produksie van multi-komponent
produkstrome nie deur die gebruikmaking van asetoon, ʼn asetoon-water mengsel of ʼn
natrium hidroksied oplosmiddel, wat deel maak van ʼn opvolgende oplossing-ekstraksie-stap,
vermy kon word nie. Om gevolglik die vervaardiging van multi-komponent produkstrome te
vermy, is ʼn hemisellulose vooraf-ekstraksie stap, bestaande uit die enkel-stap verdunde suur proses, gebruik, om sodoende 75% (w/w) van die hemisellulose inhoud in suikerriet reste, te
herwin. Die oorblywende vastestof was onderwerp aan ioniese vloeistof behandeling waarna
dit effektiewelik geskei is in onderskeidelik, sellulose en lignien verrykte produkstrome,
verkry deur gebruikmaking van ʼn oplossing-ekstraksie-stap. Tot en met 73% (w/w) van die
oorspronklike lignien en sellulose inhoud was herwin deur gebruik te maak van optimale
behandelingskondisies (120 min, 125°C). ʼn Vergelyking tussen die nuut-geïdentifiseerde
ioniese vloeistof ([BMiM]MeSO4) en 1-etiel-3-metielimidazolium asetaat, ʼn gevestigde
ioniese vloeistof, het aangetoon dat eersgenoemde ʼn superieure delignifikasie oplosmiddel is
terwyl laasgenoemde ʼn groter bydra tot die verteerbarheid van die oorblywende reste lewer.
Ten slotte het hierdie studie, metodes vir die effektiewe herwinning van
polisakkariedes en poli-fenoliese eenhede, vanaf gevestigde (bv. Suikerriet reste) en nuwe
(bv. bamboes en tritikale semels) lignosellulose rou materiale, gedemonstreer, deur telkens
van konvensionele (enkel-stadium), gevorderde (twee-stadium) en fraksionerings
voorbehandeling tegnologieë gebruik te maak. Ekonomiese verbetering kan dus verwag word
indien hierdie bestanddele as voorloper chemikalieë vir die produksie van waarde
toegevoegde produkte aangewend word, aangesien sodanige produkte die plek kan inneem
van brandstof en chemikalieë wat tans vanuit fossielbronne vervaardig word.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:sun/oai:scholar.sun.ac.za:10019.1/80347 |
| Date | 03 1900 |
| Creators | Diedericks, Danie |
| Contributors | Gorgens, J. F., Stellenbosch University. Faculty of Engineering. Dept. of Process Engineering. |
| Publisher | Stellenbosch : Stellenbosch University |
| Source Sets | South African National ETD Portal |
| Language | en_ZA |
| Detected Language | English |
| Type | Thesis |
| Format | 155 p. : ill. |
| Rights | Stellenbosch University |
Page generated in 0.0034 seconds