This study evaluates question of alkali–silica reaction (ASR) in hybrid system, which was designed in the bachelor's thesis, to meet the requirements of EN 197-1 and classified to the Blastfurnace CEM III/C cements. The durability of this system is a great unknown. For this reason, the same methods (ASTM C1260, ASTM C289 and ASTM C856) were used to observer the ASR effects as the ones used to observer the Portland cement based concrete. Supplementary methods include determination of compressive strengths according to EN 196-2 and scanning electron microscopy to observe the microstructure. Hybrid system results were compared to two different types of cements, CEM I and CEM III/B. From the results of the ASR evaluation assays, it was found that the hybrid system (CEM III/C-HB) and CEM III/B showed the lowest tendency to ASR. The results of the supplementary methods showed that CEM III/C-HB compressive strength increases after 14 days within NaOH by 43 % in comparison to 28 days strength. Based on those results, it is sure that the CEM III/C-HB shows little susceptibility to ASR.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:414119 |
Date | January 2020 |
Creators | Bradová, Lada |
Contributors | Bílek, Vlastimil, Kalina, Lukáš |
Publisher | Vysoké učení technické v Brně. Fakulta chemická |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0012 seconds