Concrete block pavement (CBP) can be an alternative pavement to asphalt and concrete pavements. CBP is formed from individual concrete paving blocks (CPBs) that fit next to one another on a suitable sub base leaving a specific joint space among them to be filled with jointing sand.
CBP differ from other pavements according to their mechanical behavior, manufacturing technique, structural design, installation technique and structural behavior. For a serviceable pavement all of these subjects have to be studied. The literature about the mechanical behavior of CPBs is not adequate. This study aims to determine the performance of CPBs formed from different mixes prepared with a white portland cement.
For this purpose, 10 mixes with different cement contents and W/C ratios and 2 mixes from a commercial CPB manufacturer were tested. The compressive strength,
tensile splitting strength, abrasion resistance, density and % water absorption tests were performed on each mix at 7, 14, 28 days.
It was concluded that, the cement content in the mix, optimum water volume for a given cement content, the way the manufacturing equipment is operated and their interaction was effective on the mechanical properties of CPBs. It was also observed that there was no handicap to stop the abrasion resistance test at 8*22 revolutions instead of 16*22 revolutions given in TS 2824.
Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12605709/index.pdf |
Date | 01 December 2004 |
Creators | Aslantas, Onur |
Contributors | Yaman, Ismail Ozgur |
Publisher | METU |
Source Sets | Middle East Technical Univ. |
Language | English |
Detected Language | English |
Type | M.S. Thesis |
Format | text/pdf |
Rights | To liberate the content for public access |
Page generated in 0.0016 seconds