Return to search

Predikce a experimentální ověření funkce distribučního systému typu Z / Prediction and experimental evaluation of the performance of a Z-type distribution system

The purpose of this work was to find a suitable calculation method for predicting the function of distribution systems in the design calculations of process and energy equipment. In particular, it aimed at describing the distribution of the working fluid flow in a dividing distribution system and a combined Z-type distribution system (with nozzles located parallel to opposite sides of the system). Analytical and CFD calculation tools validated by data from the performed physical experiments were used in this work. In the CFD method, the prediction of the dividing flow was performed for full 3D and simplified 2D geometry of Z-type distribution systems. The carried-out analyzes show that the prediction of the distribution system function obtained by both analytical and numerical approaches is accurate enough. The relative difference between the experimental and computational relative standard deviations did not exceed 9 %. The main disadvantage of 3D CFD analysis, especially concerning the purpose of the intended application, i.e., the inclusion of a distribution model in a complex modeling system for the initial design of heat transfer equipment, was the extremely long computational time. Analytical models appear to be a reasonable compromise between the accuracy of the flow distribution prediction and the computational times.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:442838
Date January 2021
CreatorsPolcsák, Jakub
ContributorsRebej, Miroslav, Babička Fialová, Dominika
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageSlovak
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0015 seconds