Cement production is responsible for around 7% of the global anthropogenic carbon dioxide emissions. More than half of these emissions are due to the unavoidable release of carbon dioxide upon thermal decomposition of the main raw material limestone. Many different options for carbon capture are currently being investigated to lower emissions, and one potential route to facilitate carbon capture could be the implementation of an electrified separate calcination step. However, potential effects on the phase composition of cement clinker need to be investigated, which is the aim of the present study. Phases of special interest are alite, belite, aluminate, ferrite, calcite, and lime. The phase composition during clinker formation was examined through HT-XRD lab-scale experiments, allowing the phase transformations to be observed in situ. Two different methods of separate calcination were investigated, one method in which the raw meal was calcined separately, and one method where the limestone was calcined separately. The former yielded an alite amount similar to that of the reference experiments, whereas the latter method yielded a lower amount. It could, unfortunately, not be excluded that the difference was due to poor experimental conditions, and additional experiments are needed to investigate the matter further. The study does, however, indicate that a calcined raw meal might be used to produce a clinker of similar phase composition concerning major phases belite, aluminate, ferrite, alite, and free lime. A raw meal containing calcined limestone might, however, need longer residence time at clinkering temperature too obtain similar phase composition. In addition, a raw meal containing calcined limestone was observed to be carbonated to a greater extent upon reheating than a calcined raw meal. Further experiments are needed to fully understand the effects on clinker composition of an electrified separate calcination step, and several improvements to the experimental method are given in the study.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:umu-184038 |
| Date | January 2021 |
| Creators | Vikström, Amanda |
| Publisher | Umeå universitet, Institutionen för tillämpad fysik och elektronik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0027 seconds