Complicated structures made of fibre reinforced laminates will suffer the failure of delamination which is the main through-thickness failure mode and is usually caused by the combined through-thickness stress state. Three tests, namely the oblique test, the waisted C-specimen test and the notched beam test, have been developed to reveal the failure activities under the combined stress state of in-plane normal stress, through-thickness normal stress and interlaminar shear, and, as a part of the big project, to establish a 3-D failure map in the coordinates of the three stress components. All tests have been analyzed either numerically by FEM or experimentally by Moire interferometry technique. The experimental results have shown that the failure behaviours of laminates are far more complicated than and very different from the traditional metallic materials which can usually be described by phenomenological failure criteria. The phenomenological criteria attempt has been tried and further confirmed that a full experimental understanding is the most important. Moreover, fractographic analysis by SEM has also been conducted to support the test results. Finally the Weibull statistics method has been used to treat the stress gradient effect in the different test geometries while establishing the failure map. It has proved to be a very efficient instrument.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:260736 |
| Date | January 1994 |
| Creators | Cui, Guiyong |
| Contributors | Ruiz, Carlos |
| Publisher | University of Oxford |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://ora.ox.ac.uk/objects/uuid:80258f41-5358-447c-8047-0769c93f062c |
Page generated in 0.0023 seconds