Diploma thesis describes the design and processing of project documentation of the apartment building. The apartment building is located in the central part of the city of Brno, in the district of Štýřice. The building has 5 floors. Its basementless with flat roof and it is based on the footings of plain concrete. Load-bearing, peripheral walls and partitions are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO built on POT supports. Peripheral walls of all floors are insulated with external thermal insulation composite system ETICS with thermal insulation of mineral wool. In the place of the plinth is wool replaced by XPS polystyrene. In the facade there are anchored wooden lattice constructions using ProPasiv anchors. These constructions are covered by façade cladding sheets CEMBRIT METRO and they devide whole building into separate units. There is housing and communal part of the building. On the first floor there are storage areas, the main service room, utility room and two barrier-free apartments. In the second to the fifth floor there are 9 residential units, one of which is designed as duplex apartment . All floors are connected by staircase and wheelchair lift. Parking for 17 cars is designed in front of the building . Two parking spaces are wheelchair accessible.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:265228 |
| Date | January 2017 |
| Creators | Jánská, Kamila |
| Contributors | Lavická, Radomila, Lavický, Miloš |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds