<p>U disertaciji su prikazani rezultati sopstvenog eksperimentalnog istraživanja mogućnosti primjene biopepela, nastalog sagorjevanjem žetvenih ostataka, kao mineralnog dodatka u cementnim kompozitima: malterima i betonima. Istraživanje je zasnovano na komparativnoj analizi 27 vrsta maltera u kojima je varirana vrsta biopepela i vrsta sitnozrnog agregata i 12 vrsta betona koje se razlikuju u vrsti veziva i u krupnom agregatu. Na očvrslom malteru su ispitani: konzistencija, čvrstoća pri pritisku i kapilarno upijanje vode, a na očvrslom betonu ispitivani su kapilarno upijanje vode, skupljanje pri sušenju, čvrstoća pri pritisku, dinamički modul elastičnosti, otpornost na habanje, vodonepropustljivost i čvrstoća na savijanje. Istaknuto je da se primjenom biopepela kao zamjene dijela cementa mogu dobiti konstrukcijski malteri i betoni, odnosno betoni sa zadovoljavajućim fizičkim i mehaničkim karakteristikama.</p> / <p>The dissertation presents the results of an own experimental research on the possibility of using biomass ash as a mineral additive in cement composites: mortar and concrete. The research is based on a comparative analysis of 27 types of mortars in which the type of biomass ash and the type of fine-grained aggregate were varied, as well as 12 types of concrete that differ in the type of binder and coarse aggregate. Following properties were tested on hardened mortars: consistency, compressive strength and capillary water absorption, and on hardened concrete: capillary water absorption, drying shrinkage, compressive strength, dinamic modulus of elasticity, wear resistance, waterpermeability and flexural strength. It was pointed out that biomass ash can be used as a replacement of a part of cement, thereby obtaining satisfactory physical and mechanical characteristics.</p>
Identifer | oai:union.ndltd.org:uns.ac.rs/oai:CRISUNS:(BISIS)110861 |
Date | 11 October 2019 |
Creators | Šupić Slobodan |
Contributors | Radonjanin Vlastimir, Malešev Mirjana, Radeka Miroslava, Stanisavljević Nemanja, Netinger-Grubeša Ivanka |
Publisher | Univerzitet u Novom Sadu, Fakultet tehničkih nauka u Novom Sadu, University of Novi Sad, Faculty of Technical Sciences at Novi Sad |
Source Sets | University of Novi Sad |
Language | Serbian |
Detected Language | Unknown |
Type | PhD thesis |
Page generated in 0.0022 seconds