El texto completo de este trabajo no está disponible en el Repositorio Académico UPC por restricciones de la casa editorial donde ha sido publicado. / This work proposes a low-cost hybrid hardware and software system that, through a set of methods and nested while loop fitting algorithms, allows to automatically identify the electrical and mechanical parameters of a brushed direct current motor. The aim is to facilitate a tool that contributes to the development of motion control projects in which this type of actuator is used, automating and speeding up the identification process of the motor system aiming to reach 98% accuracy, in order to guarantee a good electrical and mechanical parameter estimates for the brushed direct current motor. To achieve the objective, a platform was developed consisting of a main interface programmed in Matlab and a data acquisition hardware based on a single-phase incremental optical encoder, an H-bridge, an optocoupler circuit, and a C language-programmed DSPIC30F2010. Both parts of the platform are interconnected through the authors' own serial communication protocol.
| Identifer | oai:union.ndltd.org:PERUUPC/oai:repositorioacademico.upc.edu.pe:10757/656635 |
| Date | 01 September 2020 |
| Creators | Hamann, Franz, Mesones, Gustavo |
| Publisher | Institute of Electrical and Electronics Engineers Inc. |
| Source Sets | Universidad Peruana de Ciencias Aplicadas (UPC) |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/article |
| Format | application/html |
| Source | Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020 |
| Rights | info:eu-repo/semantics/embargoedAccess |
| Relation | https://ieeexplore.ieee.org/document/9220265 |
Page generated in 0.0025 seconds